catamaran with daggerboards

9 Best Cruising Catamarans With Daggerboards or Centerboards!

As an Amazon Associate, we earn from qualifying purchases. We may also earn commissions if you purchase products from other retailers after clicking on a link from our site.

Many sailing enthusiasts shopping for their first cruising catamaran might find it rather challenging to determine the best choice for their needs. If you’re in the market for a cruising catamaran with a daggerboard, then look no further. I have done the research and built a list of nine of the best daggerboard catamarans.

The best cruising catamarans with daggerboards or centerboards provide great cruising capability, comfortable living, ease of handling, and strong construction. Based on different styles, designs, sizes, and prices, some of the best catamarans are Outremer 45, Catana 50, and Balance 526.

If catamaran cruising is a passion you have been longing to pursue, keep reading. You might find your dream boat and become inspired to make your cruising vacation a reality.

Dagger/Centerboards and Their Role in Catamaran Sailing

Unlike a traditional sailboat with a single hull (monohull), a catamaran balances on two hulls, with the sails sitting in the middle. Some catamarans come equipped with daggerboards (or centerboards) whose work is to balance the force of the wind acting on the sails.

Understanding the difference between centerboards and daggerboards can help you make an informed decision when selecting a sailboat or when considering modifications to your current vessel.

If you’re sailing a catamaran with daggerboards, you’d raise the daggerboard on the leeward hull while fully extending the upwind daggerboard. This improves the catamaran’s stability when sailing windward during heavy conditions. The adjustment thus makes the boat less susceptible to capsizing.

When will a catamaran capsize?

Should You Choose a Catamaran With Daggerboards?

In general, catamarans with daggerboards perform far, much better than those without. That’s because the boat’s design focuses heavily on performance. What’s more, renowned experts design the boats with the best hulls and make the boats lighter by tweaking the materials used.

In general, catamarans with daggerboards perform far, much better than those without.

So, if you’re looking to reach speeds of 28 all the way up to 30 knots (55 km/h), then choose a cruising catamaran equipped with daggerboards. When sailing upwind, such catamarans sail much closer to the wind and are way faster than their comfort-focused counterparts. In comparison, most traditional cruising boats can only manage 10-15 knots (18-27 km/h).

What makes the catamaran so fast, and why is this type of boat even faster?

You can cover much longer distances in a day with a daggerboard catamaran.
Their high speed allows for faster ocean crossings.
They deliver superior performance, particularly in upwind directions.
You can anchor your catamaran on shallow waters – after raising the boards.
A faster cruiser means additional safety since you can outrun a storm or avoid an incoming one.
They entail more work and maintenance.
They require you to learn how to operate them safely.
They are expensive – daggerboards come with an additional amount of up to $30.000 on the construction price.
The daggerboard compartment consumes some of the space from the hull’s living area, thus limiting your comfort.

Now, let’s have a look at some of the best cruising catamarans with daggerboards.

The Dolphin Ocema 42

The Dolphin Ocema 42 is a cruising catamaran built in Northern Brazil. The boat comes equipped with daggerboards and can thus point higher windward. But it also boasts a smaller wet surface when running and can pull with ease into shallower anchorages – 3 feet ( 0.91m) or less. That means that you can anchor your catamaran far from the crowd (or beach it ), then walk ashore. It also gives you more anchorage space to choose from.

However, it’s important to note that:

Raising the Dolphin’s daggerboards means exposing her rudders from underwater hazards.
The daggerboard could place the hull’s integrity at risk in case of a grounding.
The trunk consumes valuable interior space.

Created by designer Philipe Pouvreau, the Dolphin 42 is the only Dolphin model that boasts daggerboards. The boat strives hard to balance performance and comfortable cruising in a compact package. As a result, the cruising catamaran sports a foam core which helps in reducing its overall weight.

While some of the Dolphins built later at various custom shipyards bear some additions or structural modifications, most Dolphins are high-quality, safe, comfortable, and perform successful circumnavigations.

Pricing : $220,000-$350,000

The Outremer 45

The Outremer 45 is a Gerard Danson design. This classic cruising catamaran is unique in that it didn’t undergo mass production like most multihulls. Instead, the French Outremer came from a semi-production manufacturing line where all interior parts are laminated directly to the hull, forming an extremely stiff structure.

This classic cruising catamaran is unique in that it didn’t undergo mass production like most multihulls.

One downside to this catamaran is that it comes with a much smaller interior than other boats. Also, it doesn’t come cheap. However, everything else about the Outremer makes it the perfect sailor’s boat because:

It’s highly responsive to the helm.
It has a high bridge deck clearance.
It comes with well-proportioned bows.
It features balanced weight distribution, which helps to minimize pitching.

Earlier models featured soft canvas bimini (optional) covering a stainless framework, while later ones had optional overhead composite panels. The latter provides a better option since canvas tends to become waterlogged when it rains.

You can order the Outremer 45 as an owner version, a club version with additional berths, or a four-cabin layout.

Pricing: $320,000-$560,000

The Atlantic 42

The Atlantic 42’s efficiency and aesthetics have resulted in the growth of a massive loyal following. Despite being the smallest of the Atlantic cruising catamarans, the A42 is quite popular with sailors due to its ocean-faring capabilities, ease of handling, and excellent use of space. This catamaran embodies a true classic right from the forward cockpit, through the pilothouse, the sleeping cabins, to the galleys.

Unlike other catamarans, the Atlantic 42 has a waist-high cockpit located in front of the pilothouse and behind the mast. It boasts a solid construction owing to the large metal bearers running over the bulkheads.

Unlike other catamarans, the Atlantic 42 has a waist-high cockpit located in front of the pilothouse and behind the mast.

This setup provides the boat with maximum strength, better air circulation beneath the engine, and high flexibility when it comes to engine size and positioning.

At first, the vessel’s style and outlook appeared rather conservative, but with time, it was evident that the Atlantic 42 was a long-lasting catamaran built using high-quality materials. The boat’s exterior looks stunning, and the interior is quite impressive as well, while spacious aft cabin accommodation and shower compartments are an additional bonus.

Pricing: Contact Chris White Designs

The Gunboat 62

If you’re looking for a vessel that can fit all your gear plus more during your voyages, then the Gunboat 62 is the ideal cruising catamaran for you. And guess what? You can stuff all your gear and equipment in this vessel and still outperform a similar-sized racing monohull. The boat’s helm seat is not only comfortable but also offers 360-degree visibility, ample storage space, a working surface, and a luxurious cabin.

The Gunboat 62 is among the best top-performing catamarans in the market, and this particular series set up the Gunboat brand. It performs incredibly well during storms with speeds of 35 knots (64.82 km/hr) and beyond despite its epoxy, E-glass, and carbon-fiber build. Furthermore, its design features a distinct angular outline, quite unlike most similar-sized catamarans.

The Gunboat 62 is among the best top-performing catamarans in the market, and this particular series set up the Gunboat brand

Since it’s light in weight, this catamaran can sail upwind at speeds above 17 knots (31.48 km/h) while pinching up to 30 degrees. Indeed, this catamaran boat can easily tack through 95 degrees and still manage to outshine the fastest racing monohull. And, like most performance catamaran cruisers, the Gunboat 62 can reach almost 20 knots (37.004 km/h) under the right conditions.

Pricing: Contact Gunboat

Check out this list of the fastest cruising Cats on the market!

Gemini 105Mc

The Gemini 105Mc is the ideal cruising catamaran for you if you’re in the market for a boat to use for weekend sailing trips. The boat is also comfortable enough for long cruising vacations since it boasts spacious accommodation, great design, and delivers a stable cruising platform.

This vessel is more of a sailing cottage. Designed by the renowned Tony Smith, the 35 feet (10.6m) floating cottage is also cozy, safe, and good value for money since its price is quite reasonable.

This vessel is more of a sailing cottage.

The boat comes with incredibly slim, teardrop-shaped hulls with flat bottoms and a smaller wetted surface, allowing for minimal drag. It also leads towards more leeway when under sail. The hulls sport a kick-up centerboard which helps to enhance the catamaran’s windward pointing abilities. Furthermore, the rudders rise to enable the boat to cruise in shallow waters with ease, while most vessels tend to run aground.

The Gemini 105Mc has a narrow beam measuring about 40% of its length. This is quite unlike today’s beams at 50%. Still, the boat’s low center keeps it upright, stable, and safe. Although no longer in production, you can still purchase a preowned Gemini 105Mc .

Pricing: Contact Gemini Catamarans

The Catana 50

There are only 2 Catana production sites in France, this guarantees exceptionally high-quality standards in every boat. The Catana infrastructure is more advanced than that of other catamarans and features spacious bridge-deck clearance and a high freeboard. In addition, its curved daggerboards drastically reduce the drag, while crash boards ensure the buoyancy of any of the Cantana models.

The Catana 50’s daggerboards angle slightly inward to maximize lift under sail and enhance lateral resistance underwater. They are thus more effective than the long but shallow keels found in other catamarans. As a result, this catamaran performs exceptionally well to windward. When sailing off the wind, raising the boards helps to minimize drag.

The Catana 50 is an ultramodern catamaran designed to make long-distance passages easy and safe. This massive sailboat measures almost 50 feet (15.24m) long and sports a beam of around 26 feet (7.92 m). Most people consider it the best-built and most fashionable cruising catamaran, but the boat is bound to test your sailing skills if you plan to sail it solo.

The Catana 50 is an ultramodern catamaran designed to make long-distance passages easy and safe.

The amazing catamaran features a rig that allows you to use a screecher or a self-tending jib. While this might sound complex, the Catana 50 is fairly easy to tack once you set out on the course.

This performance-oriented catamaran boasts efficient hulls and rigs that allow for fast speeds. Also, its long waterline, along with the bow’s subtle underwater shape, helps boost volume while lessening wave drag. The stern platforms can also aid in stretching the length of the waterline while allowing easy access from a dock. If a collision were to occur, the sturdy board trunks would protect the hulls.

Pricing: About $1.4 million

McConaghy MC50

The McConaghy MC50 launched in 2018. A fast cruising cat designed to cross oceans, this catamaran came with impressive features such as a skylight smack in the center of the coachroof that allows light to flood in. Also, the saloon has an extending table that provides adequate space for up to eight diners and converts into a lounging room when you install the fill-in cushion.

The galley boasts an induction hob and molded-in sinks, while a navigation station occupies a spot at the front of the saloon – providing good visibility and systems access. The vessel’s unique design simulates a penthouse apartment on the deck with 35 to 40m2 (376.74 to 430.56ft2) of space, possibly the largest in a 50ft (15.24m) yacht.

The MC50’s 3.5m-deep (11.48ft) hydraulic centerboards boost the boat’s upwind performance and include a fail-safe if an underwater collision occurs. The boards take only 12 seconds to raise. This catamaran delivers great pace and upwind capability, all wrapped up in a high-quality, stylish, and roomy interior.

The key to the MC50’s outstanding performance is the optimized hull shape and the 40% carbon fiber lay-up, which result in greater stiffness. Exhibiting great engineering detail, the hydraulic centreboards swing into the hulls, providing a welcome solution to the challenge of having daggerboards without eating up too much accommodation space.

Pricing: Contact McConaghy Boats .

Atlantic 47 Mastfoil

The Atlantic 47 is one of Chris White’s spectacular designs. It places the cockpit forward of the deckhouse, the aft deck sits behind the pilothouse, and the large pilothouse has easy hull access.

This unique design enhances the safety and functionality of the Atlantic 47 as it provides the crew with full forward visibility and easy, safe access to the sailing controls. It also transforms the traditional deckhouse into an appealing and more comfortable pilothouse.

All Atlantic cats come equipped with daggerboards, with the majority sporting vertically retracting ones. That’s because to sail upwind really well, a catamaran requires deep, well-shaped hydrofoils underneath the boat to enable it to claw windward.

An excellent top performer, the Atlantic 47 combines great cruising capability, comfortable living, and ease of handling. This spacious boat also boasts a generous aft deck, a high all-around bulwark, and a starboard walk-through for quick and easy access to the dinghy.

All Atlantic Cats sport an impressive safety record owing to their robust construction, innovative design, and easy handling. Besides, the indoor watch-keeping capability helps to minimize crew fatigue, allowing safe and more enjoyable cruising. To further enhance their safety, all boats contain watertight collision bulkheads in addition to emergency capsize habitation.

Pricing : Contact Chris White Designs .

The Balance 526

A passion for building the best-performing cruising catamaran d esigned for speed, comfort, and perfect for families . The ability to carry cruising payloads inspired the Balance 526 . Designed by a team highly experienced in sailing, cruising, racing, and building catamarans, the 526 is simple to operate, maintain, and offers gracious, elegant living.

With state-of-the-art beds, showers, cabinetry, and finishes, the European-styled interiors feature high-end interior design. What’s more, you can pilot this exceptional vessel single-handed owing to the innovative design, reefing station, and self-tending blade jib . These features allow almost anyone to maneuver the catamaran safely through any weather.

If you’re seeking optimal performance under sail, you can configure this cruising catamaran with either dual daggerboards or high-performance fixed keels . The great thing about using the fully retractable dual daggerboards is that you can sail in shallow waters and beach your catamaran without any problems.

To enhance upwind performance, place the boards in the down position, and raise them to improve off wind performance. In dangerous cross seas, the Balance 526 side-slips prevent the tripping effect related to large fin-keeled catamarans.

The balance 526 comes with the all-weather Versahelm design. A first in catamaran design, it accords serious cruisers the best of both worlds. You can slide open the hardtop and sail in the open air during fair weather, close it in foul weather, and get into the aft cockpit. The down position allows you to scan around as you look for docking and provides a warm, safe, and comfy place to pilot the 526 in any weather.

To combat fatigue, the Balance 526 thoughtfully comes with adjustable helm chairs. There’s also a retractable helm standing platform that you can raise to increase sightlines whenever you pilot over the bows, navigate narrow channels, or cluttered estuaries.

Strong but light, this vessel weighs under 12.5 tons (11,339.81 kg). Hence, if you ever need to outrun or position away from bad weather, the Balance 526 will speedily and safely take you wherever you need to go.

Pricing : Contact Balance Catamarans

Final Thoughts

As you can see from this list, cruising catamarans with daggerboards are available in a wide range of designs, styles, and sizes. This can make choosing the best one a bit overwhelming. Still, whether you’re looking to get a catamaran at a bargain, an exceptional performer, or a classic, there’s a boat to suit every need and budget.

The best thing is to look beyond the fancy designs, layout, or equipment and consider fundamentals. These include sound construction, a good sail plan, cruising capability, ease of handling, and comfortable living.

Wikipedia: Daggerboard
McConaghy Boats: McConaghy Boats
Sail magazine: 10 Great Cruising Cats
Sail magazine: Catana 50
Gunboat: Home
Gemini Catamarans: Home
Gemini Catamarans: Gemini 105Mc Design Touch Overview
Chris White Designs: Atlantic 47 Mastfoil
Chris White Designs: Home
Catamaran-Outremer: Outremer 45
Sail How: Which Catamarans Have Daggerboards?
Yachting World: Performance cruisers: the best new catamarans for racing and fast cruising 2018
Dreamy Yacht Sales: Best Catamaran Brands Guide – 6 Top Catamarans
Hellenic Shipping News: Daggerbards in Demand on Cruising Boats
Balance Catamarans: The Perfect Harmony of Performance and Livability
Multihulls-World: Catamaran Basics the Daggerboards: Understanding and Adjusting Them

Owner of CatamaranFreedom.com. A minimalist that has lived in a caravan in Sweden, 35ft Monohull in the Bahamas, and right now in his self-built Van. He just started the next adventure, to circumnavigate the world on a Catamaran!

What Are Daggerboards on a Catamaran? (An In-Depth Look)

Have you ever wondered how catamarans move so fast and efficiently through the water? The answer lies in daggerboards, a unique and essential feature of these vessels.

Many sailors consider daggerboards to be one of the key advantages of sailing on a catamaran over a monohull sailboat.

If you’re curious to learn more about the science behind this nautical feature, then this article is for you.

Here, we’ll dive into the details of what daggerboards are, how they work, the benefits they offer, the types of daggerboards, and the best practices for maintenance and performance.

By the end, you’ll be an expert on the topic and be able to make an informed decision about the best type of daggerboard for your vessel.

Table of Contents

Short Answer

Daggerboards are vertical boards on a catamaran that can be raised and lowered to provide lateral resistance and stability to the boat.

When the daggerboards are lowered, they provide more stability and can help the catamaran sail closer to the wind.

When they are raised, the catamaran has less resistance and can move faster.

Daggerboards are an important part of a catamaran’s design, as they provide stability and control in difficult weather conditions.

What Are Daggerboards?

Daggerboards are a vertical fin-like structure found on a catamaran, which is a type of sailboat with two hulls of equal size.

Daggerboards are typically located on the centerline of the boat and can be raised and lowered at the skipper’s discretion.

This allows the skipper to adjust the center of effort on the boat, which in turn affects the boat’s maneuverability and control.

At the most basic level, daggerboards provide additional lift and stability to a catamaran, allowing for improved performance in light winds.

They work by creating forward thrust and lift, helping the boat move through the water more efficiently and allowing it to make tighter turns.

Daggerboards also help to reduce leeway, which is the tendency of a boat to drift sideways in the water due to the wind pushing against its sails.

By positioning the daggerboard at an angle, the skipper can reduce the amount of leeway the boat experiences, allowing it to maintain a more consistent course.

Overall, daggerboards are a key component of sailing catamarans and can have a significant impact on the performance of the boat.

With the right setup, they can make a boat faster, more maneuverable, and easier to control in a variety of conditions.

For sailors looking to get the most out of their catamaran, understanding how to use daggerboards is essential.

How Daggerboards Work

Daggerboards, also known as centerboards, are a vertical fin-like structure found on a catamaran.

They are typically located on the centerline of the boat and can be raised and lowered at the skippers discretion.

Daggerboards are designed to provide the catamaran with additional lift and stability in light wind conditions.

This helps to improve the performance of the catamaran by adjusting the center of effort on the boat, allowing for greater maneuverability and control.

When the daggerboards are lowered, they act as an underwater keel, providing additional stability and lift.

This helps the catamaran to cut through the water more efficiently, allowing it to move faster and with greater control.

The daggerboards also help to prevent the boat from drifting sideways in the wind, which can be a common issue with monohulls.

The daggerboards also help to reduce the amount of heeling (leaning) experienced when sailing upwind, making the sailing experience more comfortable and enjoyable.

When the daggerboards are raised, the catamaran will be more maneuverable and have improved performance in light wind conditions.

This is due to the reduced drag caused by the daggerboards not being in the water.

The raised daggerboards will also help to reduce the amount of heeling experienced when sailing downwind, making the sailing experience more comfortable and enjoyable.

The use of daggerboards can significantly improve the performance of a catamaran in light wind conditions and is a key component of sailing catamarans.

By raising and lowering the daggerboards, the skipper can adjust the center of effort on the boat, allowing for greater maneuverability and control.

The Benefits of Daggerboards

Daggerboards are an essential part of sailing catamarans for a number of reasons.

The most obvious benefit of having daggerboards on a catamaran is that they provide additional lift and stability, allowing for improved performance in light winds.

By raising and lowering the daggerboards, the skipper can adjust the center of effort on the boat, giving them greater control over the boat’s maneuverability.

This can be advantageous in tricky situations, such as sailing close-hauled or in tight spaces.

Additionally, daggerboards can help reduce drag in certain conditions.

By raising the daggerboards, the boat can be steered more efficiently by using the hulls to provide lift instead of the daggerboards, which can result in less drag and improved performance.

Finally, daggerboards can help improve the safety of a catamaran.

In rough seas, daggerboards can provide additional stability, helping to keep the boat upright and preventing it from capsizing or being damaged.

This can be especially beneficial when sailing in unfamiliar waters or in bad weather conditions.

In summary, daggerboards are an invaluable component of sailing catamarans.

They provide added lift and stability, can be used to adjust the center of effort on the boat, reduce drag, and improve the safety of the boat.

With all these features, it’s no wonder that daggerboards are a must-have for any serious catamaran sailor.

Types of Daggerboards

When it comes to daggerboards, there are two main types that can be found on a catamaran: retractable and fixed. Retractable daggerboards are typically made of fiberglass and can be raised and lowered at the skipper’s discretion. This allows the skipper to adjust the center of effort of the boat, providing improved maneuverability and control. Fixed daggerboards are usually made of wood or metal and are permanently mounted in the centerline of the boat. These boards provide an extra layer of stability and lift to the catamaran, allowing it to perform better in light winds.

In addition to the two main types of daggerboards, there are also some other variations that can be found on some catamarans.

A daggerboard trunk is a type of daggerboard that is mounted inside the hull of the boat.

This allows the daggerboard to be raised and lowered without having to be removed from the boat.

A foil daggerboard is a type of retractable daggerboard that is designed to provide additional lift and stability to the catamaran, allowing it to perform better in heavier winds.

There are also battened daggerboards, which are a type of fixed daggerboard that is designed to provide additional lift and stability to the catamaran.

No matter which type of daggerboard is chosen, they all provide additional lift and stability to a catamaran, allowing it to perform better in different wind conditions.

By understanding the different types of daggerboards and how they can improve a catamaran’s performance, skippers can make the most of their sailing experience.

Daggerboard Maintenance

Daggerboard maintenance is an important aspect of owning and sailing a catamaran.

It is important to keep the boards in good condition to ensure they are performing as efficiently as possible.

This means periodically checking the boards for wear and tear, making sure they are properly lubricated and free of debris, and ensuring that the fastenings and connections are secure.

Regularly inspecting the boards for signs of corrosion or damage is also important.

If damage is found, it should be addressed immediately to prevent further damage and to ensure that the boards are performing as efficiently as possible.

In addition to inspecting the boards, it is important to keep them lubricated to ensure smooth and efficient performance.

The best way to do this is by regularly applying a lubricant specifically designed for marine use.

This will help reduce friction and keep the boards in good condition for longer.

It is also important to keep the fastenings and connections of the boards secure.

This includes the bolts that attach the boards to the frame, as well as the pins and clips that hold the boards in place.

It is important to inspect these regularly for signs of wear and tear, and to replace them if necessary.

Finally, it is important to keep the boards free of debris or dirt.

This can be done by regularly rinsing the boards off with fresh water after sailing, and by using a soft brush to remove any dirt or debris that has accumulated.

By following these simple maintenance tips, you can ensure that your daggerboards are performing as efficiently as possible and that your catamaran is sailing to its full potential.

Daggerboard Upgrades

The daggerboard is a key feature on catamarans, as it provides lift and stability to the boat.

It is located on the centerline of the boat and can be raised and lowered at the skipper’s discretion.

This allows the skipper to adjust the center of effort on the boat, enabling greater maneuverability and control.

For those looking to maximize the performance of their catamaran, there are several upgrades available for the daggerboard.

A taller daggerboard can be installed to increase the lift and reduce drag, while a lower profile board can provide improved stability.

Additionally, a carbon fiber board can be used to reduce weight, further increasing the overall performance of the boat.

Another upgrade is the addition of a daggerboard trim tab, which allows for more precise control of the daggerboard.

This is especially useful in light winds, as it allows the skipper to adjust the daggerboard to maintain the optimum angle of attack.

This can significantly improve the performance of the boat in light winds.

Finally, there are a variety of shapes available for the daggerboard.

Different shapes are designed to optimize the performance of the boat in different conditions, so it is important to select the shape that best suits your needs.

In conclusion, daggerboards are a key component of sailing catamarans and can have a significant impact on the performance of the boat.

By upgrading the daggerboard, skippers can maximize the performance of their catamaran and improve its overall maneuverability and control.

Daggerboard Performance

When it comes to sailing performance, daggerboards can have a significant impact on a catamaran.

When the daggerboards are up, the center of effort is lowered, allowing the catamaran to sail in light winds with better speed and efficiency.

When the daggerboards are down, they provide additional lift and stability, allowing for improved performance in heavier winds.

The shape and size of the daggerboard also affects the performance of the catamaran.

A wide, shallow daggerboard will provide more lift in light winds, while a narrow, deep daggerboard will provide more stability in heavier winds.

As such, it is important to choose the right daggerboard for your catamaran to get the most out of it.

In addition to improving the performance of the boat, daggerboards can also help reduce drag when sailing upwind.

When sailing upwind, the daggerboards create a venturi effect, which helps reduce the drag on the boat.

This can make a huge difference in performance and can allow the catamaran to reach higher speeds in upwind conditions.

Finally, daggerboards can make a catamaran more responsive to steering.

When sailing downwind, the daggerboards can be used to help the boat turn more quickly and with greater precision.

In this way, the daggerboards can be used to make a catamaran more responsive and agile.

By adjusting the daggerboards, the skipper can adjust the center of effort on the boat, allowing for greater maneuverability and control.

Daggerboards can also help reduce drag when sailing upwind and make the catamaran more responsive to steering.

Final Thoughts

Daggerboards are a key component of sailing catamarans, and their presence has a significant impact on the performance of the boat.

They can provide additional lift and stability, allowing for improved performance in light winds, as well as greater maneuverability and control.

With the variety of daggerboard types, upgrades, and maintenance available, there is something for every boat and sailor.

Understanding how daggerboards work and the impact they can have on sailing performance can help you make the most of your catamaran.

So, take the time to consider the different options and see what daggerboards can do for you.

James Frami

At the age of 15, he and four other friends from his neighborhood constructed their first boat. He has been sailing for almost 30 years and has a wealth of knowledge that he wants to share with others.

Catamaran Daggerboards and Keels – Woods Interview # 9

Post author By Diane Selkirk
Post date March 27, 2021
No Comments on Catamaran Daggerboards and Keels – Woods Interview # 9

I am with Richard Woods, and we are talking about catamarans. He’s a legendary catamaran designer and experienced catamaran sailor of many different designs. This is one of several interviews we’re having on different topics. Today, we’re talking about daggerboards versus keels. Richard will tell us a little bit about how daggerboards work, how keels work, and what some of the benefits of each are.

For more from Richard Woods, please go to his website .

Richard, can you start off with what dagger boards and keels do for a boat?

There’s the three basic ways of preventing leeway, which is what you’re going to be doing with a multihull. On a monohull you’ve got the keel. Essentially, it’s for stability to balance the heeling, to stop the boat heeling too much. You don’t have that as a problem on a multihull. You are just trying to stop leeway.

You can do it either with using the hull shape, which would be like a Catalac or Wharram catamaran. Then the next would be to have keels. The third would be to have daggerboards.

You could essentially say that a catamaran with keels is a bit like a long-keel monohull, and the daggerboard catamaran is a fin keel monohull in more terms. I think we all know and all agree that the best sailing boats are going to be the one with fin keels. Then progressively a long-keel boat or keel or one with low aspect-ratio keels on the catamaran, that would be the next best. Then the one relying just on hull shape, whether it’s a test barge or a Catalac is going to be the the least good.

There’s two things on that. One is that the daggerboard prevents leeway better, but also prevention of or reduction of pitching, increasing potential top speed. You want to have buoyancy at the ends of the boat and not in the middle. You imagine a diamond shape sailing to windward, and it pitches up and down, up and down, and you end up hobby-horsing. Whereas a boat with fuller ends isn’t going to do that. Unfortunately, the thing with their keels, is that the buoyancy is more in the middle of the boat.

So there’s the two factors: one is the the sea kindliness of having daggerboards, and the other is the better performance.

A daggerboarded boat is always better, but it does have some disadvantages. The main one is that if you want to beach your boat or dry it out. To me, that’s always a major advantage of a multihull. You got to be able to have lifting rudders, and essentially, you don’t want your propeller to be the deepest part of the boat, or if you’ve got an inboard engine.

The daggerboarded boats work really well when you’ve got outboard engines and when you’ve got tiller steering, because it makes it easier to get the rudders. It is still possible on bigger boats and you can also have a bit of a compromise of having a small keel, and then the daggerboard. Or you can have like your boat was, which had daggerboards in the lead hull, so you didn’t need to lift the rudders. The rudders are still higher than the bottom of the keel.

Although there’s a lot of places in the world where you don’t have to beach the boat, the most obvious to say: the Great Lakes in North America, Florida, the Bahamas, most of the Caribbean in fact, you don’t have to. The Mediterranean. They don’t have tides and so you’re not in the beach.

I’ll just show you this. I’m just going to turn the camera around a bit now. As you can see, this is our house now. In fact, it’s low water and we have about an 18-foot tidal rise, so that’s more than you. It actually is neat, so it goes up quite a bit further. But we are used to drying out for six hours a day, every day when we moor our boats. So for us, it’s much more important to have good protection for the bottom of the boat.

If you’re sailing in Florida and then you sail up to say, Cape Maine, you suddenly get to the box and you get this 10, 12-foot tide, and you do want to go around, either deliberately or what not. With daggerboarded boats, you’ve got to think about a lot more when you’re beaching a boat.

The interior room, you might think that was a problem. But usually you can make the daggerboard, say, fit around the side of a heads compartment, or the galley worktop, or something like that, so it’s never really a problem. You can have the dagger board on the inside or the outside of the hull, it doesn’t seem to make much of a problem either.

But the other thing is that the daggerboards are more expensive to make because you’ve got to make the daggerboard case, which is in effect, same as making a keel. Then the daggerboard and then the controls for the daggerboard, so that all adds to cost and complication.

And there’s definitely a learning curve to knowing how to use the daggerboard effectively, and have that experience. So are they less of a beginner kind of attribute on a catamaran and more of a somebody who’s been sailing for a while?

Yes. There’s no point really, in having daggerboards if you’re not going to use them. Essentially, that means having them in simplest, both down sailing to windward, and then lift the leeboard when you’re reaching, and lift both when you’re sailing downwind. That’s the normal.

But you can have the position of, if you’re sailing in big seas, especially big quartering sea downwind, the tail wags the dog. In other words, the rudder steers, and it’s not actually doing anything, because there’s no hull in the water. Then, it makes it a lot easier having the daggerboards both half down.

So yes, you learn quite quickly how your boat behaves according to whether the daggerboards are up or down.

The other thing that I found, is that a lot of people, when they break a daggerboard, it tends to be the lead daggerboard that breaks. When you’re sailing, that’s the side that gets powered up when you’re pushing down on being hit by a wave, and pushing sideways tends to break the daggerboard.

Of course the other thing is, it’s quite a good ultimate echo sounder. We have never actually broken a daggerboard, on any boat, I don’t think. When we were, this is a good excuse because it was an unmarked reef, but we were sailing off Nicaragua, and we were sailing at eight knots. We hit a reef with the daggerboard and the boat stopped dead. In fact, my wife fell over. It was driving a car at 10 miles an hour into a wall, sort of effect, and once we sorted ourselves out, and we lifted the daggerboard, we lost about the trailing edge, about a foot by four inches being totally destroyed. We had a mill u-volt, a 5/16th u-volt, as an up haul, and that was bent completely flat by the force of the boat stopping.

I guess it was a sacrificial item!

We still sailed.

Right. That’s what I’m thinking. Rather than hitting the reef with your boat, you hit it with something sacrificial. They can be expensive to replace, but…

Yes. We didn’t hit it with the boat, no. We hit it with something that we could carry on for another three months before we actually had it taken out of the boat and repaired.

Of course, that’s always something. If you can take the broken bit to the mechanic, or to the boat yard, that’s always better than doing it the other way around. Usually, you can carry on sailing with one daggerboard or two half-daggerboards, whatever, but it is quite a common problem.

As I say, if you’ve got a conventional inboard engine with fixed rudders, there are quite a lot of multihulls around, even here, but they’re treated like monohulls. You can’t, for example, go to the Scilly Isles and go to Hawaii, and Green Bay, which is a wonderful place to spend a lifetime, really. It’s the nearest the equivalent of going into the Bahamas. But you can’t do that if you’ve got a boat you can’t dry out.

I guess that’s why multihulls became so much more popular in the UK before other places.

Everything in design, it’s always interconnected. Going back to the comfort, and the rolling. If you look at the Scilly Isles, which are 30 miles off the Southwest corner of England, sort of like saying you’re going out of Miami, and there’s the Bahamas. It’s not quite that far, but it’s pretty near the same as going to Bimini.

There’s a whole stack of islands, but the pilot guide says there is no safe anchorage, because it was written by a monohull sailor. We’ve been and they say, “You know, if you go into this anchorage, then you’re going to be as protected as you can be.” We’ve been into those anchorages, and they’ve been horrible, because you’re open to when the tide’s in. You’re open to the ocean because when they’re out, it’s out in the Atlantic. When you can dry out, you go onto these lovely sandy beaches, and you can dry out and you’re safe then.

Well that’s cool. So thank you Richard, that was fascinating on daggerboards and keels.

Tags Buying Advice , Richard Woods

By Diane Selkirk

I love to travel and have spent the past seven years sailing with my family aboard our 40 Woods Meander catamaran - traveling from B.C.'s north coast, to the west coast of the US, Mexico, the South Pacific, Australia, New Zealand, South East Asia, across the Indian Ocean to South Africa and on to St Helena, South America, the Caribbean and Central America.

How We Do: Daggerboards

“HOW WE DO…”

A NEW TECHNICAL SERIES IN WHICH HH CATAMARANS CHIEF OF OPERATIONS PAUL HAKES WILL TALK ABOUT DIFFERENT DESIGN AND BUILD ELEMENTS THAT MAKE AN HH SO VERY SPECIAL. IN THIS ISSUE PAUL DISCUSSES DAGGERBOARDS:

How strong is an HH daggerboard?

Daggerboards add performance to a catamaran. In doing so they are subject to incredible side forces to stop the boat slipping to leeward and providing lift. A straight daggerboard not only stops leeward slippage but also provides lift to windward because the water flowing over the board has a high pressure and low pressure side, much like an airplane wing. This, in turn, allows you to sail at a higher upwind angle. In the case of a curved daggerboard not only do we get windward lift, we also get upwards lift which effectively reduces the displacement of the boat. The result yet again is higher performance, and the faster the boat moves through the water the greater the lift. In the case of the HH66, with standard curved boards at 20 knots, which is commonly achieved in 20 knots of wind, the upward lift is around 15-20% of the boat’s displacement. That’s approaching 3,600kg of upward lift! Sailing at this speed we could well be flying a hull, and so the entire righting moment of the boat is now leaning against the leeward board. Again, on an HH66 at this speed that’s over 5,000kg. When you start reefing the mainsail the center of effort in the sail plan is lowered, therefore the amount of side force necessary to fly a hull is even greater. In fact now the daggerboard loads are getting scary, but hopefully the ride is still fun!

Owners of nearly all makes of catamarans are asked to start lifting the leeward daggerboard when reefing or hull flying, it is part of your Owner’s Manual, because they break otherwise. Not with HH Catamarans, these are full grown catamarans designed to deliver the performance you are seeking whatever the conditions (within reason). So not only is your HH66 daggerboard hanging 3.5m below the water, it can safely handle hull flying loads with two reefs in the mainsail. This is the standard set for the HH55 and the HH50 too. Our engineers and any competent Naval Architect can calculate the righting moment to ‘hull fly’, and therefore can determine the load on the daggerboard, same for Reef 1 and Reef 2. Furthermore it often times gets wavy in the sea, and at these speeds our catamarans can start leaping off the waves. This motion creates ‘dynamic loads’ on the boards (boat and rig too). Engineers are hard pushed to understand and predict dynamic loads, so they typically take a known full working load and double it to allow for the ‘dynamic load’. As we do not want our board to break with dynamic loads, even with a 2x safety factor over maximum known working load, we then double the load again to determine the breaking load. For our HH66 the result is a board that has a full working load flying a hull with two reefs at 8,500kg, and a breaking load of 34tons! We apply the same standards to the 55 and 50 sister ships.

You may ask, how can we be so sure? We test. Every single HH Catamaran daggerboard goes into our monster testing jig and we apply the full force of the known working load to fly a hull with two reefs and the two times “dynamic load factor”. So, an HH66 board gets tested to a staggering 17,000kg, which is really scary. Even with our new HH50, the boards are tested all the way to 10 tons. As the load is applied, we can also measure the deflection to ensure this too matches design.

Dealing With Covid-19

Hh50 owner testimonial.

production Strider 24

plywood Romany 34

lightweight 14ft Zeta mainhull

Strike 15 trimaran at speed

28ft Skoota in British Columbia

10ft 2 sheet ply Duo dinghy

24ft Strider sailing fast

36ft Mirage open deck catamaran

All Our Designs
For new visitors
About Richard Woods
Useful Articles
Testimonials
Plan Updates
Links to Owners and Suppliers
Consultancy Service
Boats for Sale
Blog and Facebook Posts
Our Cruising Blog (updated Jan 26th 2020)
Download Eclipse logbook (300 page pdf)
Download Newsletters 1992-2002 (pdf)
Download Year Reviews 2002-14 (pdf)
Download FAQs (pdf)
Download Boat Tests (pdf)

Keels or Daggerboards, the pros and cons

When writing about foils (ie boards, keels and rudders) it is easy to baffle people by talking about lift to drag ratios, NACA sections, end plates, twist, stall, Karman vortices and all the rest. So I won't - it's probably best to leave all that to designers and hydrodynamacists Instead I'll try to help those who want to know the basics; like should they have keels or boards on their multihull?

I'm not just a multihull designer; I'm also a (home) boatbuilder and owner. Currently I own two catamarans, one with daggerboards and one with keels. Over the last 30 years I have owned five cruising catamarans with keels, nine with daggerboards and one with one centerboard. Furthermore, I am one of the few designers who has fitted LAR keels and boards to the same hull (on Strider, Sagitta and Banshee) and then sailed them against each other.

As with everything to do with yacht design, leeway prevention is a complex subject. And it is not helped by the fact that boats are not just for sailing. You load them down and treat them as a floating cottage when you live aboard them. You motor them, you dry them out (either when the tide goes out or when stored ashore in a boatyard). And you have to pay for it all.

===========================

First a bit of simple theory

The main factor determining the efficiency of a foil is its "Aspect Ratio" (AR) or the ratio of it's depth to width. I think we all know that a high aspect ratio foil is more "efficient" than one with a low aspect ratio. A 3:1 AR is generally considered ideal for rigs but is usually too high for foils. In fact a 1:1 AR is OK for keels, although 2:1 or a bit more is better. In other words, a 1.5m deep daggerboard on a 10m boat will be about 750mm fore/aft (or more properly called it's "chord"). And it will be about 75mm thick, as the thickness of a foil should be about 8-10% of the chord.

Despite the fact that high AR foils are more efficient, there are a couple of reasons for limiting AR. As the AR increases the chord decreases and so the foil becomes thinner and clearly it is then also weaker. Unfortunately the foil loads have gone up (because the deeper the foil the further the Centre of Lateral Resistance (CLR) is from the bottom of the hull, so the lever has lengthened). So long, narrow foils are more prone to damage (one reason all those monohull keels have snapped off - a J800 lost one just recently).

In addition, the higher the AR the easier it is to stall the foil. When a foil stalls it stops "working", this is most obvious after tacking in a sloppy sea and you find that the boat won't sail properly for a couple of boat lengths. That is because the foil has stalled. In other words, you have to be sailing in flat water and be a very attentive helmsman to avoid stalling a high AR foil.

The lower the AR the bigger the foils area has to be to compensate for the reduced efficiency, however a lower AR is more tolerant of shape, surface roughness and angle of attack (which basically makes it easier to sail)

So how big should a foil be? Roughly 4% of the sail area is a good starting point. Some designers use very small boards. That may be OK in theory, which says that you sail in flat water at maximum speed, but in practice I find you need a bigger board to cope with waves and slow sailing, never mind tacking in a lumpy sea.

Whilst on the dangers of too much theory. Many race boats use sophisticated shapes and low drag sections. Don't use them unless, like top racing boats, you also dry sail your boat. Only the simplest shapes work with a rough surface (even new, clean antifouling is considered rough), these fancy shapes need a smooth, ie a mirror finish, to be of benefit.

I definitely don't like asymmetric foils. True they may give a bit more lift but only one can be used at a time, the other HAS to be raised. So you are carrying around the extra weight of a second board and box plus wasting time adjusting boards after each tack which all makes it not worth the very small efficiency gain.

Many people, especially cruisers, don't mind compromising on performance if it means an easier life, more load carrying and greater protection for the rudders and propellers. And that is why Low Aspect Ratio (LAR) keels are so popular. In much the same way as monohull sailors buy a long keel boat rather than one with a fin keel.

Unfortunately, using LAR keels results in a slower boat and more pitching. That is because to optimize speed you need a hull with buoyancy in the ends, not in the middle (technically you need a high Prismatic Coefficient - Cp). Clearly adding a LAR keel adds buoyancy in exactly the wrong place. Furthermore the midships buoyancy makes the boat pitch more as the hull is more "diamond-like". Having said that the buoyancy in the keel adds to total displacement, so you can carry more gear. And you can use the keel as a water tank/shower sump or even somewhere to fit an engine.

As I have just said, a lower AR means having a bigger foil and so clearly a LAR keel has to have much more area than a daggerboard. Thus the wetted surface area (WSA) is significantly increased, especially when sailing offwind compared to a daggerboarded boat with raised boards. And WSA is the prime source of drag at low speeds. So most designers draw a compromise keel which is smaller than strictly needed to balance the sail forces. But these forces must still balance and this can only be done by having a wider sheeting angle. Which in turn means a LAR boat cannot point as high as one with daggerboards.

So all in all boats with LAR keels are slower on all points of sail and in all conditions when compared to a daggerboarded boat. Say 5deg more leeway and 2deg less pointing. Remember it is hard to tell ones real leeway from looking back at the wake as in a seaway the top 2-3ft of water is blown sideways by the wind. So unless the keel is in deep still water you don't notice that you are drifting sideways until you look at the gps.

Further Design Considerations

Boards can be daggerboards (ie adjusted vertically) or centerboards (ie adjusted by rotating). Even though centre boards sometimes fit better into the accommodation layout and can pivot aft without damage when hitting the ground, daggerboards have proven far more popular. Probably because the centerboard pivot bolt often leaks, while it is very difficult to stop the water surging in the case with the board down, and it is easier for "Stuff" to get stuck in the gap between slot and board, thus jamming the board. A centerboard box/centerboard is probably heavier than using daggerboards. And finally it is harder to remove a centerboard for painting/maintenance.

Angled boards actually take up little interior room and can always be incorporated into accommodation dividers - the nav table bulkhead on a Banshee, the hanging locker on a Sagitta, against the hull side on a Merlin for example. More important is that they then don't bang around in a sloppy sea. Providing the board is angled at under 15deg to the vertical I haven't found any disadvantage in using angled boards. Nor have I noticed any difference between boards placed on the inside of the hull and those on the outside. Certainly there is no advantage in having vertical boards fitted on the hull centerline.

Don't use central boards though the bridgedeck. They simply don't work well. The Prout brothers discovered that in 1953 when they fitted a central board on the prototype Shearwater. By 1954 they had fitted boards in the hulls. The Stiletto catamaran started with a central daggerboard but owners quickly found that converting to ones in the hulls improved performance significantly.

The bottom of a LAR keel should be horizontal, otherwise you'll dry out at angle (OK I know that in many areas boats never dry out, but you want your boat level when in a boatyard) Even worse is a keel that is too short as then the boat can fall forward or aft when people move to bow/stern. Clearly dangerous and damaging to crew and boat.

Building Considerations

Boards are heavy, and more expensive than LAR keels, there's nothing one can do about that. To save weight you can make a short board, so that when down the top of the board is below deck level. Daggerboards can be profiled over their full length. But in that case you need to make the board first, and then make the box round the board. So you need to make expensive boards early on during the build.

The alternative is to profile only the below water portion, leaving the rest rectangular. This means the box is also rectangular, so the board can be made after the box. True, there is some extra turbulence when the board is half raised, but you can negate much of that by fitting a profiled cover plate on the outer side. Also I've found that there are less chance of leaks with a rectangular box and more important, weed, twigs etc are less likely to get between board and case and jam the board.

Many people suggest building a "crash box" to absorb any grounding shock. But be warned! I made one once years ago as an experiment on a dinghy. I ran aground and the board moved back into the crash box, exactly as planned. But then jammed - not part of the plan!! I had to capsize to free the board so I could raise it. Hardly practical on a cruising catamaran!

I haven't used a crash box since, relying instead on a very heavy laminate at the back of the box. My reasoning is that the tapered trailing edge of a board is far weaker than the box and so will always fail first. I proved that when hitting an unmarked reef off Nicaragua and we lost about 300mm x 100 mm of board, yet the box itself was undamaged.

Boards are generally made in timber or foam/glass. I prefer plywood over laminated timber as it is easier to profile. Foam boards are attractive in theory, but it is very hard to stop them warping and getting the correct shape without making a mould first is almost impossible. If you do make a mould you have to join the two halves, and remember boards don't just bend they also twist.

If you can, fit LAR keels as late as possible, this keeps the boat nearer the ground during building and saves a lot of ladder climbing.

What about in use?

Unlike boards, LAR keels are very much fit and forget. So there isn't much to say about keels, except to make sure you have a good sacrificial beaching strip and keep it maintained.

It is sensible to lift the lee daggerboard when reaching, as I have found that most breakages are of the lee board as it gets very loaded at speed. However lifting both boards in a big cross sea is not a good idea as that loads the rudders and that, apart from anything else, makes it heavier to steer, so have both boards half down.

Not being able to lift the lee board for half the time is one reason why I don't like using only one board in one hull. Doing so also means the board is much bigger so there are more local loads and of course it is harder to adjust. And it doesn't seem right to have the CLR so far offline. However if you do fit one board don't fit it in the galley hull as that is always heavier than the other hull.

Lifting the lee board to allow the boat to slip sideways is commonly thought a good idea. I'm not convinced. Tank test work has shown that having a deep lee hull actually helps prevent capsizing. That is because the windward hull lifts to a breaking sea, the sea goes under the bridgedeck and hits the lee hull. Because it is deep it is pushed sideways, which dissipates any overturning energy.

People often think you need a long keel (monohull or multihull) to steer straight "hands off". That simply isn't true. Good directional stability depends on the hull balance. A properly designed daggerboarded boat will sail as straight as a LAR keel one, and have the additional benefit of being quicker to tack and maneuver when necessary.

Finally, if you run aground, you can lift the boards to get off, but remain stuck with keels.

If you don't ever expect to race then keels are OK

If you think crosscut Dacron sails are good enough then keels are OK

If you trail your boat regularly fit dagger boards

If you have wheel steering and inboard engines and expect to dry out often fit keels

If you want the best performance then fit dagger boards, but be prepared to use them

Outremer 45
Outremer 4X
Outremer 4.zero
Outremer 52
Outremer 55
Outremer 51
Outremer 5X
All the Outremer Fleet
Personalized support
Blue Water Sailing Seminars
Our concept
The Outremer team
Our commitments
Construction principles
Our catamaran services
After-sales customer service & Quality control
Offshore Connected Catamaran Maintenance
Concierge Services
Our owners’ stories
FAQ – Outremer catamarans

Brokerage: used catamarans for sale
Privacy Policy
Legal Notice
Grand Large Yatching

Daggerboards: how to adjust them on your catamaran

Author : Nikki Henderson

When I asked the Outremer Ladies’ community for suggestions on webinar topics, ‘Daggerboards’ was top of the list. I wasn’t surprised. I don’t think I’ve had a day out on an Outremer with prospective or current owners where daggerboards were not discussed.

It makes sense that there is a curiosity about daggerboards; using them properly is essential if you want your Outremer to perform. What is interesting though, is how confusing people find them.

One thing I’ve realised is that for some people, the issue is similar to my relationship with electronics (hate) and engineering (love). Things I cannot physically see are inherently cloaked in mystery and much more challenging for me to understand. This can be the case with daggerboards: they are hidden underwater and so are often forgotten or misunderstood.

The other reason that daggerboards can be confusing is that they affect not just the performance of a catamaran, but also the safety. Sometimes the theories contradict each other and lead to conflicting advice as to the right and wrong way to use them. In fact, there is no one ‘rule’ about daggerboards. The key, as with anything on a boat, is to understand the reasoning behind the basic daggerboard practices, so that you can make your own decision based on your own unique circumstances that you encounter at any particular time.

I hope this blog will help you build this critical foundation of understanding so that you can set sail safely and with confidence. Daggerboards – like sail trim – is a subject of continual learning. See this as step 1 in the life-long journey.

Catamaran daggerboards: how should they be adjusted for optimum sailing?

Daggerboards are best thought of as an ‘underwater sail’ – sometimes called a ‘foil’. Just as a sail above the water needs trimming – so does the sail under the water. But unlike the sail above the water, the daggerboard only has one trim option: how much of it is exposed below the hull.

When sailing upwind the daggerboards provide resistance and lift under the water to balance out the sideways effort force from the sail above the water. In more simple terms, daggerboards help the boat move forward rather than sideways when sailing upwind. Therefore, when sailing upwind, the assumed best practice is to have the daggerboards down. [UP-wind = DOWN-board]

When sailing downwind, the effort force from the sail works almost entirely in the direction you need the boat to go. Therefore, you do not need the resistance under the water from the daggerboard to help with the direction. In fact, it will probably hinder you from sailing deep downwind and slow you down. Therefore, when sailing downwind, the assumed best practice is to have the daggerboards up. [DOWN-wind = UP-board]

Generally, when sailing with wind on the beam – a good ‘go-to’ trim set up is one that is somewhere in the middle of downwind and upwind trim. Therefore, a good starting point for a beam reach would be to lift the daggerboards half-way up.

Which catamaran daggerboard for which sailing conditions?

For any competent dinghy sailors who understand daggerboards, this is the most common question as they are typically used to using only one!

An important key principle, is that a daggerboard is only effective when it is submerged in the water. Therefore, if you were sailing the boat purely for performance in a flat sea, you would always need to be trimming at least the leeward one. If the windward hull lifts slightly here and there (which it does fractionally in any substantial wind) then the windward daggerboard is not working efficiently.

Do you drop the windward board? In relation to performance, this depends on how much underwater resistance you need.

In very light winds, the standard practice is to lift the windward daggerboard all the way and only trim the leeward board. When both daggerboards are down, (for simplicity) there is now double the ‘underwater sail’ area. This would likely imbalance how much power there is from the light winds on the sail above the water, and literally ‘drag’ the boat and slow her down.

As the winds increase, there may be a time where you feel you want more underwater resistance, and you could consider lowering the windward board as well. You might find your course over ground improves. Then it was a good decision. If your speed decreases, it might be creating too much drag and you should lift it back up.

If the wind continues to increase further, it is likely you will choose to reef the main. If we return to the concept of the daggerboard being the ‘underwater sail’, if you reef the main, then consider reefing the daggerboard and lifting some up slightly with each reef you put in upwind to keep the boat balanced.

You may be wondering how such a tiny thing as a daggerboard could balance out the enormous sail area of a main sail. The answer here is that water is a much denser fluid than air, and so the daggerboard needs much less area to create the same force than it would do if it were in air.

Safety at sea: adjusting daggerboards to avoid risks

This is where things start to get a little confusing.

The leeward daggerboard being down will increase the risk of ‘tripping up’. Therefore, in any significant sea state – or possible impending increase in wind/seastate such as if you are close to a mountainous shore line – where you feel that the hull is, or may, lift a lot, it is in fact safer to lift the leeward daggerboard and only use the windward one. Be aware that you will see a drop in performance as this contradicts the performance best practice of trimming the leeward board and not the windward.

The safest option entirely in very large sea states where the sea is actually tilting the boat significantly from side to side as she rolls down waves is to lift both daggerboards, so you float along waves like a raft.

‘Tripping up’ is a phrase used a lot and in fact sometimes misunderstood. To explain what it means: if there is wind/waves coming from the side of the boat and the windward hull lifts slightly in a wave, or there is a gust and the sail powers the boat forward – the leeward hull can ‘dig in’ to a wave and trip the boat up. The best way to imagine this is imagine getting one of your shoelaces on one of your feet stuck but the rest of your body is still walking. You will fall over. Same with the boat.

A converse argument to lifting the daggerboards up, is that dropping both of them will protect the underside of the boat – from grounding, or from hitting a submerged object. Having both daggerboards partially down can protect the propellor. Having them at ‘deck level’ can protect the rudder. In other words, if you hit something then it will hit the daggerboard before the more fragile underwater equipment.

Another argument against lifting the daggerboards entirely, is that with no daggerboards, your rudder is doing all the ‘resistance-work’. It is hard to believe, but it also acts as a very tiny underwater sail too. There will be a huge load on the rudder with no daggerboard at all and this risk is probably not worth the gain in speed on a long downwind ocean crossing. One way to spot if the rudder is working too hard is just look at your autopilot rudder angle – if it’s maxing out and having to work very hard to keep the boat going straight then you probably have too much sideways slip. It’s a bit like the boat is sailing on an ice rink. In that case, I’d recommend putting both of them down a touch. This will benefit both the ruder and the autopilot (therefore power consumption).

(Read our Safe Sailing article to learn more about safety on board)

Using daggerboards is a balancing act! Boat weight, weight distribution, sail area, wind strength, sea state, sail trim are all things that effect the decision for how to use the daggerboards: how much daggerboard to use and which one (or both) to use. This is why it’s not an exact ‘one size fits all’ rule and anyone who tells you so is probably oversimplifying it which could lead to a dangerous sitaution. But start using them and see how the boat feels. The beauty of buying an Outremer is that if you keep her lightweight and trimmed well, then she will talk to you and tell you what feels good. Don’t believe me? Try sailing a brand-new Outremer out of the factory before she has anything on – then compare it to one with four peoples’ life belongings on – and you will see what I mean. 😉

Continue navigation

Setting off on a catamaran with the best sailing weather

When you’re getting ready to set off on a sailing trip, it’s vital to find out about the seasons and weather phenomena in your chosen sailing area. Even before choosing your cruising destination or travel itinerary, or even selecting your yacht!

Catamaran VS Monohull: what should you choose to sail around the world?

Sailing around the world is a dream come true: you discover the world to the rhythm of the wind and the stopovers, exploring new destinations every day as you sail. If you’re just starting to read this article, you’re probably nurturing this project. Are you planning to sail around the globe? Then the choice of ship for your next voyage is crucial.

The Importance of Defining Success

In the Autumn of 2023, I ran a ‘Webinars for Women’ mini-series on transatlantic preparations. The first session was titled: “How to approach transatlantic preparation.” As I zoomed out of the nitty gritty of canned food recipes, spare parts inventories, and preventative sail repair and took a broader look at the framework for a successful crossing, I homed in on what I think the first and most important step is: defining your goal.

Daggerboards

The majority of today's cruising catamarans are equipped with mini keels for reliable and hassle-free operation. There are fewer than a handful of production daggerboard catamarans, which provide the sailor slightly more pointing ability and other advantages as illustrated in previous chapters. Their operation is generally straightforward via either a single uphaul line in case the board is heavier than water, or by an additional downhaul to keep the foil lowered, in case it is more buoyant.

Needless to say, when trying to point as high as possible, the leeward board should be fully deployed. The finer the hulls of the catamaran and deeper the foils are, the more they will contribute to getting the multihull to windward. In very rough conditions, when the boat will be thrown around by wind and waves, it is a good idea to divide the loads between both boards and only let them halfway down.

Marking the daggerboards at deck level will help indicate a "control" depth and assist in judging when they will be extending deeper than the rudders and thus aid in protecing them in case of a collision.

For a more detailed description of daggerboards and their use, please refer to the "Appendages" chapter.

Continue reading here: Tacking

Was this article helpful?

Recommended Programs

Myboatplans 518 Boat Plans

Reefing - Catamarans Guide
Appendages - Catamarans Guide
Explain The Hydrodynamics Of A Daggerboard
Catamaran Design Guide - Catamarans Guide
Hull - Catamarans Guide
Heavy Weather Tactics - Catamarans Guide

€ 0.00 0 items

Description

The first HH44 was launched in 2023 and premiered at the Cannes International Yachting Festival. This innovative design is the “baby” of the HH Catamarans range and has some interesting features such as her closed transoms, swing aft helms and a side boarding gate aft.

She’s a very pretty cat and will turn heads in the marina. This is HH’s first hybrid electric-powered catamaran although you can also opt for standard diesel power with shaft drives.

There are 2 versions, like much of the HH range. The Sports Cruising model: HH44-SC and the Ocean Cruising model: HH44-OC. The SC version is a “no-compromise-boat” with C-shaped carbon daggerboards, a carbon rig, a painted hull finish and 4,232 watts of solar with EcoDrive.

The OC saves you some money with the same hull, interior fit and finish quality as the sportier SC but with an aluminium mast, e-glass longeron, white gelcoat finish and mini-keels as standard.

Many of the ideas on this boat have been driven by a desire to maximise solar generation. There are 4,232W of peak solar on the cabin top alone with an option for more on the davits.

To maximise the solar, they have positioned the helms aft in a traditional sporty set-up. That way, there’s plenty of surface area up top to load on solar.

To help you stay protected in weather, these swing inboard, under the long coach-roof.

There are foldaway seats that tuck into the sides allowing you to either steer the boat from an outboard position with the wind in your hair and your sails’ tell-tales in full view.

Or swing the helms inboard and steer from the protected three-seat sofa on the aft beam.

To make it easy to board the boat in the marina, there is a side gate aft for when you come in along the dock.

The HH44 has been designed to sail. The whole idea behind this catamaran is to get sailing in light winds (you should match wind speed on a beam reach) and to maximise your SOG over a wide range of conditions.

So she has a self-tacking staysail, a solent, a fractional reacher and a furling gennaker. The boom is very low over the coach-roof which keeps the centre of effort from the mainsail low.

There is a traveller aft on the coach-roof to manage your mainsail shape. The HH44 points well into the wind (45 TWA) thanks to her C-shaped daggerboards which provide a bit of lift at speed.

All the lines come back to the helm, so she is set up for short-handed sailing.

Light, rigid and fast, the HH44 is a great sailor
Swing aft helms give you flexibility while opening up the living space in the aft cockpit
The finish on this boat is excellent
Those closed transoms create a safe enclosed living space. They’ll also save you money in the marina
A great looking boat that should hold her value well in the market due to the high demand
The EcoDrive strikes a great balance between electric motoring with back-up diesels for safety
With those aft helms, visibility is reduced towards the opposite bow, although the sight lines through the salon windows is good.
This is not a cheap yacht
The forward cabin is cosy. There is an option for a Pullman berth here (or convert to a workspace)
The bow lockers seem small, although they are deep

Light Construction

Carbon and epoxy have been used to build as strong and stiff a yacht as possible while minimising the weight.

All of the lines run under the decks, so you have clear walkways around the boat. Stanchions are 900mm tall and a continuous, unbroken toe rail runs the length of the deck with all hull and deck joints fused and hidden.

Living Space

Moving inside, you’ll notice that the aft cockpit and salon forms one fully protected space with a large sofa on the aft beam and her closed transoms make this a safe family boat.

The angular cabin has two large, forward-facing windows that open fully from the the generously sized (187 sq ft or 17.4m2) salon. The standing height is over 2m (6’6”) high throughout.

One of the things that sets the HH44 apart from her competition is the quality of the finish on this semi-custom yacht. She has foam core furniture and exceptional joinery throughout, and Bosch electric appliances as standard.

There are two options for a BBQ, one which replaces the aft sofa with a large LPG BBQ & Dive Tank station or you can mount an LPG Grill in the aft fishing rod holder, keeping the aft sofa. There is an outlet on the aft beam so you can run an electric BBQ.

In the salon, there is an L-shaped sofa with a table forward to starboard and a large nav station/workstation to port.

Tuck yourself into the U-shaped galley behind the nav station or pull out some cold ones from the fridge on the starboard side. The ventilation at anchor is excellent with those huge forward windows.

The starboard hull is the owner’s side and consists of the master cabin aft and a walk-in shower and head forward. The finish has an Italian feel to it and it is very light down here with a large window aft in the owner’s cabin.

This is a 44 foot performance cat, so there is not as much room down her as you’d find in a cruising cat, but she has ample space in the aft cabin and the storage is well organised.

HH offers three different forward cabin combinations. One is the standard layout with a single berth.

The second has a Pullman berth above the standard bed that folds away when not needed.

A third option does away with the beds and replaces them with a large work bench with shelves (for pantry storage or tools) and an extra Fridge/Freezer unit.

If you go for the option with the EcoDrive, the House Bank is powerful enough to run the A/C overnight without the need to run a generator. There is enough power to run the A/C in the master cabin for over three days.

EcoDrive, her Electric/Diesel Parallel Hybrid System The HH44 was designed from scratch to work with a parallel electric/diesel hybrid, with a minimum of 4,232W of peak solar array on the cabin top and hydro-regeneration while sailing.

EcoDrive gives you silent fume-free motoring at 7.5kts, fast torque for manoeuvring, and hydro-regeneration while sailing. Plus you have parallel, trusty diesel engines for safety.

A diesel engine is paired with a large electric motor, much like an alternator sits on a traditional diesel engine. A belt links the two units and a camshaft allows you to flip between the two power systems, giving you good redundancy. And remember, you have 2 of these systems on board!

The system is designed to offer from 1.5 to 3 hours of electric propulsion: more than enough time to exit the marina or anchorage and hoist the sails.

This boat has been designed to get sailing in light winds which ultimately is the key to an eco-friendly sailing yacht. And you will be recharging your batteries as you sail.

You can also fit the HH44 with traditional standalone diesel engines with shaft drives.

The HH44 is an innovative design that will appeal to sailors setting out across long distances who want to sail more and beat well to windward when needed. This yacht is in a different price league to something like an Aventura 37 of course, but there are two options here: the Sports Cruising and the Ocean Cruising models.

She’s a comfortable boat, although there is a trade-off on space down below particularly in the forward cabins.

With the EcoDrive option and a bow locker full of sails, you’ll be able to minimise your diesel usage on this boat while crossing oceans safely and quickly.

What is the price of an HH44? How much do they cost? The sportier HH44-SC starts at $1,325,000. Meanwhile the HH44-OC version starts at $957,000 USD. The total cost will vary depending on your options, but you should budget an additional $300k, perhaps more for the SC.

How much solar is there on the HH44? The HH44 has a generous 4,232W of peak solar as standard on the SC on the cabin top. You can fit 1,200W watts over the Davits, but this comes with a weight penalty.

What is the length of the boat with transoms up? With the transoms up, the LOA from davits to Bow Sprit is 14.23m (46.68 feet), so fine for a 15m berth.

What size tender can you carry? The optimum sized tender is 3-3.5m (10-11 foot). The davits are carbon fibre and will soak up a high load.

Technical Specification

LOA	15.31m / 50.2'
LWL	13.37m / 43.86
Beam	7.15m / 23.46'
Draft Boards Up	0.7m / 2.5'
Draft Boards Dn	3m / 9.84'
Bridgedeck	825mm / 2.7'
Displ Light	10.2 T / 22,487 lbs
D/L	111.5
Disp Max	14.5 T / 31,967 lbs
Power	2 x 30HP+10kW hybrid
Mainsail	72.4m2 / 779sqft.
Solent	44.1m2 / 475sqft
SA/D	26.3
Staysail	23.9m2 / 257sqft
Reacher	84.8m2 / 913sqft
Gennaker	148.9m2 / 1603sqft

Related Catamarans

Atlantic 57

Seawind 1600

Browse, search and find your perfect catamaran!

Privacy Overview

Custom Cats
Performance Cats
Cruising Cats
Luxury Cats
Owner Reviews
YT Channels

Which catamarans have daggerboards?

After researching catamarans we have made a list of catamarans with daggerboards. Performance means a great deal for us, so we are looking at the pros and cons of daggerboards, and would like to share our knowledge in this article. If you know of any boats that should be included in this article, please let us know.

Why choose a catamaran with daggerboards?

Daggerboard catamarans are usually higher performing than those without. Not only because of the daggerboard itself but due to the specific focus on performance especially in these types of vessels.

Usually, that focus also makes them lighter as the shipyards have tweaked the materials used to make them light. Often they are designed by the most renowned experts to make the best hulls.

The most important reason to choose daggerboards is performance. They sail closer to the wind when sailing upwind, and they are usually faster than those who focus more on comfort.

Not that daggerboard cats are uncomfortable, but the daggerboard compartment takes up a bit of space from the living area inside the hulls. And you will have to decide if it is worth the decrease in comfort compared to the enhanced performance.

Another reason for choosing daggerboards is the possibility to anchor on shallow waters, as when the daggers are lifted, the draught is often around 3’ or 1 meter or even less.

Catamarans with daggerboards

A list of catamaran models with daggerboards:

Sud Composites
Soubise / Freydis – Tournier Marine

French-built catamaran. Well sailing and luxurious.

Also French catamaran. Reviews are pretty good. Easy sailed.

Brazilian built catamaran from 2013. Only this model has daggerboards.

designer Philipe Pouvreau. 30 of them were built before 2008, and after that, a dozen more were built in various custom shipyards. One should therefore be aware of eventual modifications or deviations in the design of the later models.

But the quality is still great, also on the late models, and they have successfully circumnavigated, and are still.

Founded by Alan Adés in 1990, and in 1999 they signed with VLPL, a group of Architects who specialized in multi-hull designs for the competition.

This resulted in the Switch 51, a very well-performing catamaran, which amongst others are known for very decent speed in even moderate wind speeds. They did however not build that many, before switching to building custom catamarans.

Three main models, are still in production:

Soubise 49 Croiseur Soubise 56 Soubise 70

Is not very well known, 27 feet

Scionning Known to be very high performance.

Benefits of having daggerboards on a catamaran

High performance (speed and efficiency in various wind directions. Especially in upwind directions.)

Can utilize shallow waters, with the boards raised. Typically 3 feet or even less, which means that you can anchor away from the crowd and walk ashore.

Generally, you will have much more anchorage space to choose between.

Disadvantages of daggerboards

More work, more to know and learn, their place in the boat may limit the comfort.

Costly. Adds around 30.000 $ to the construction price.

Why choose daggerboards over fixed keel?

The choice of having daggerboards is mostly a compromise between comfort and performance. Daggerboards make the cat able to sail closer upwind, and the boards are made to enhance the speed.

Boats with fixed keels are sometimes slower, usually also heavier, but also more comfortable, as they have more living space. And if you are sailing short passages, the heavy boat is a good choice.

But if you are going to cross the oceans, the difference in performance is remarkable. It can be several weeks longer crossings compared to higher performing cats.

Daggerboards are for sailors who expect to make longer passages, and who have some experience sailing.

Should you own or charter a boat?

I could give you many reasons why not to buy a boat, but they would be the same reasons not to have a child. Unknown…

How Anchors Work and All You Need to Know about Anchoring

In this article, you will not only learn all the basics about anchors. You even get all the more advanced knowledge you need about how…

Why catamarans have trampolines

There are several reasons why trampolines are the right choice in catamaran design: It is lightweight, give little resistance to wind and water, is comfortable,…

Tips for new sailors in 2022

Are you considering taking up sailing, then you may wonder if sailing is a dying hobby? In this article, we would like to answer some…

0 No item in your cart
The magazine

Current issue

All the issues
My magazines
Technical specifications
Multihull of the Year
Classified Ads
Destinations
Online store
All the magazines
Subscriptions
Accessories

This latest HH project from Morrelli & Melvin retains the same silhouette of the other models in the range while affirming its ambitions in terms of performance: displacement remains modest and is associated with a powerful rig - this culminates at 94½ feet (28.78 meters) above the water...

Create a notification for Catamaran

We will keep you posted on new articles on this subject.

Published 05/11/2021

By Emmanuel van Deth

Issue: SP17

Published: dec. / jan. 2022

Choose the option that suits you best!

Issue #: SP17

Published: December / January 2022

Price per issue - digital : 7.90€ Digital magazine
Price per issue - print : 9.90€ Print magazine
Access to Multihulls World digital archives Digital archives

Upwind, the daggerboards can push the draft down to just over 13 feet (4.00 m): we suspect that upwind course-keeping will be exceptional. The deck layout has two particularities: firstly, a cockpit that is as wide as it is streamlined, and secondly, twin helm and maneuvering stations at mid-height. The protection of the area is ensured by three small independent biminis or one larger, more enveloping one.

Builder: HH Catamarans Length: 58’11” (17.95 m) Beam: 26’8” (8.12 m) Light displacement: 34,175 lbs (15.5 t) Draft: 4’3”/13’1” (1.3/4 m) Mainsail: 1,509 sq ft (140.15 m²) Solent: 750 sq ft (69.63 m²) Engines: 2 x 57 HP

www.hhcatamarans.com

Most-read articles in the same category

Archipelago 80

Sanctuary Cove International Boat Show

Lagoon Escapade

What readers think.

Astrea 42 Smart Electric

Subscribe now

The latest news from €3 / month

Video of the month

Our latest YouTube hit!

The Multihull of the Year

The 2024 results

Classified ads

2018 Fountaine Pajot MY 44

TRIMARAN FOILER EX TRINITRINE

Travel aluminium daggerboard catamaran

Corsair 880

Vous avez ajouté " " à vos favoris., vous avez supprimé " " de vos favoris., in order to add this article to your favorites, please sign in..

Catamarans with Daggerboards: Enhancing Stability and Performance

by Emma Sullivan | Aug 9, 2023 | Sailboat Lifestyle

Short answer catamarans with daggerboards:

Catamarans with daggerboards are multihull sailboats consisting of two parallel hulls and vertical foils called daggerboards that can be raised or lowered. Daggerboards improve stability, reduce leeway, and increase upwind performance by minimizing side slipping. These high-performance catamarans are commonly used in racing, offshore cruising, and recreational sailing due to their enhanced speed and maneuverability capabilities.

How Catamarans with Daggerboards Enhance Sailing Performance

If you’re a sailing enthusiast, you may have heard about the growing trend of catamarans equipped with daggerboards. But what exactly are daggerboards and why do they enhance the sailing performance of these unique vessels ? In this blog post, we’ll dive into the details and give you a professional, witty, and clever explanation.

First things first – let’s understand what a catamaran is. A catamaran is a multi-hulled vessel consisting of two parallel hulls connected by a deck structure. Unlike traditional monohulls, catamarans offer increased stability due to their wider beam. This stability means more balance when sailing through choppy waters or in heavy winds . However, even with their inherent stability advantage, there’s always room for improvement when it comes to performance.

This is where daggerboards come into play. Daggerboards are vertically retractable underwater fins that can be found on both sides of a catamaran’s hulls. These boards mimic the functions of centerboards or keels found in monohulls, but with some key differences .

Unlike fixed structures on monohulls, daggerboards can be raised or lowered based on different wind and sea conditions. And trust us – this simple mechanism makes all the difference in terms of performance! By adjusting the depth at which the daggerboard extends below the waterline, sailors can optimize the flow of water around their vessel.

When cruising downwind or in lighter winds, raising the daggerboard allows for shallow draught navigation while minimizing drag created by unnecessary underwater surface area. On the other hand, when sailing upwind or encountering stronger gusts, lowering the boards increases lateral resistance and prevents sideways slippage known as leeway.

Essentially, daggerboards function as hydrofoils for catamarans . They create lift by exploiting Bernoulli’s principle – faster-moving air above generates lower pressure compared to slower-moving air below an object’s surface (or in this case, water). This lift effect counteracts the forces acting on the hulls and reduces slippage, thus improving both speed and control.

But let’s not forget about the clever engineering behind daggerboards. These modern-day marvels are crafted from lightweight yet durable materials such as carbon fiber or fiberglass, ensuring optimum strength-to-weight ratios while keeping performance at its peak. The adjustable nature of daggerboards also comes into play during maneuvers like tacking or gybing, making it easier for sailors to change direction smoothly without losing precious momentum.

So why should you care about catamarans with daggerboards? Simple – they offer a thrilling sailing experience with enhanced performance capabilities. Whether you’re seeking the adrenaline rush of competitive racing or just looking for a smooth cruise across open waters, these vessels provide unbeatable stability and speed that can take your sailing game to new heights.

In conclusion, catamarans equipped with daggerboards have revolutionized the world of sailing by maximizing performance through clever hydrodynamics and adjustability. So if you’re ready to enhance your sailing adventures with a touch of finesse and innovation, hop aboard a catamaran with daggerboards and prepare to ride the waves like never before!

Exploring the Benefits of Catamarans with Daggerboards Step by Step

Title: Exploring the Benefits of Catamarans with Daggerboards Step by Step

Introduction: Catamarans have gained widespread popularity in recent years due to their stability, speed, and spaciousness. One key element that maximizes the performance of catamarans is the presence of daggerboards . In this blog post, we will delve into the benefits of catamarans equipped with daggerboards, exploring each step involved. From improved sailing capabilities to enhanced comfort , let’s discover the remarkable advantages these sleek vessels offer.

Step 1: Understanding Daggerboards in Catamarans Daggerboards are vertically retractable appendages mounted on both hulls of a catamaran. Serving as underwater wings, they can be lowered or raised depending on sailing conditions. When deployed, daggerboards greatly contribute to a sailboat ‘s lateral resistance and stability.

Step 2: Heightened Stability at Sea One prominent advantage of catamarans with daggerboards lies in their exceptional stability. The wide beam between two hulls minimizes rolling motion even under rough sea conditions, offering an incomparable sense of security for those prone to seasickness or seeking a more comfortable cruising experience.

Step 3: Superior Upwind Performance Daggerboards revolutionize a catamaran’s ability to sail upwind effectively. By lowering both daggerboards symmetrically, the wetted surface area decreases, reducing drag significantly while maintaining lateral resistance. This enables catamarans with daggerboards to venture closer to windward than traditional keel-powered boats – an invaluable feature for sailors navigating challenging coastal or offshore routes.

Step 4: Enhancing Maneuverability When maneuvering close to shorelines or marinas, daggerboards provide heightened control and agility. Their adjustable nature allows sailors to alter their angle or completely retract them into the hulls when additional clearance is required – ensuring simple navigation through shallow waters or tight spaces where other vessels may struggle.

Step 5: Increased Speed Potential The presence of daggerboards in catamarans grants them superior speed capabilities, especially in reaching conditions. With reduced drag and improved stability, these formidable vessels can easily harness the power of the wind, gliding swiftly across open waters . Daggerboards enable a catamaran to maintain higher average speeds throughout long passages, ensuring quicker and more enjoyable journeys.

Step 6: Enhanced Safety Catamarans equipped with daggerboards boast enhanced safety features that make them an ideal choice for offshore cruising or adventurous sailing trips. By allowing sailors to control their draft depending on the sea state or desired performance, daggerboards minimize the risk of grounding or collisions with underwater hazards. This versatility enhances overall onboard safety and peace of mind.

Conclusion: Daggerboards are not merely another feature found in high-performance sailing vessels; rather, they revolutionize the way catamarans navigate through various conditions. From heightened stability at sea to improved maneuverability and increased speed potential, these retractable appendages offer unparalleled benefits for enthusiasts seeking comfort, agility, and thrilling experiences on the water . Next time you embark on a catamaran adventure, keep an eye out for those sleek daggerboards that make every voyage a remarkable one!

Frequently Asked Questions about Catamarans with Daggerboards

Are you considering purchasing a catamaran with daggerboards but find yourself overwhelmed with questions? Fear not! We have compiled a comprehensive list of frequently asked questions about catamarans equipped with daggerboards to quench your curiosity. From the advantages they offer to common misconceptions, we’ve got you covered. Join us as we delve into this intriguing topic.

1. What is a catamaran with daggerboards?

A catamaran with daggerboards is a type of sailing vessel that features two hulls connected by a platform known as the bridge deck. Unlike traditional catamarans, these innovative vessels are equipped with retractable keels called daggerboards which can be adjusted based on sailing conditions.

2. Why choose a catamaran with daggerboards over other designs?

Catamarans with daggerboards offer numerous advantages for avid sailors. Firstly, their ability to retract or extend the boards allows for enhanced maneuverability and increased speed in different weather conditions . This means greater control when sailing upwind or in shallow waters where other boat types might struggle.

3. How do daggerboards affect performance?

Daggerboards significantly improve sailing performance by reducing sideways drift (known as leeway) and increasing the lateral resistance provided by the keels. By adjusting their position according to wind direction, sailors can optimize their boat’s angle against prevailing forces and achieve higher speeds.

4. Do I need any special skills to handle a catamaran with daggerboards?

While operating any sailboat requires some level of skill and experience, handling a catamaran with daggerboards doesn’t demand extraordinary expertise. As long as you possess basic sailing knowledge and understand how to utilize the adjustable keels effectively, you’ll be able to harness the full potential of these vessels easily.

5. Are there any drawbacks to using daggerboards?

Although the advantages of using daggerboards significantly outweigh potential downsides, there are some considerations worth mentioning. Catamarans equipped with daggerboards may have a higher initial cost compared to other designs due to their specialized construction. Additionally, maintenance and repairs for the daggerboard mechanisms might require more attention.

6. Can I still sail a catamaran with daggerboards in shallow waters?

Absolutely! The retractable nature of daggerboards enables catamarans to navigate shallow waters with ease. By lifting the boards, you can safely venture into areas where conventional keels would prohibit passage, opening up new possibilities for exploration while maintaining stability.

7. Are catamarans with daggerboards faster than those without?

The adjustable nature of daggerboards does provide potential for increased speed, particularly when sailing close to the wind or upwind . The reduced drag caused by retracted boards allows these vessels to efficiently glide through the water, resulting in impressive acceleration and velocity that can outperform traditional catamarans.

8. Are there any misconceptions surrounding catamarans with daggerboards?

Indeed, a common misconception is that daggerboards are solely beneficial for racing purposes or experienced sailors seeking high-performance vessels . However, these boats are equally suitable for cruising enthusiasts looking to enjoy enhanced control, stability, and overall comfort during their nautical adventures.

In conclusion, choosing a catamaran with retractable daggerboards offers an innovative approach to sailing characterized by improved performance and adaptability across various conditions. Novice or seasoned sailors alike can make the most of these unique vessels while exploring shallow waters or harnessing greater speed capabilities. So set sail confidently on your next maritime adventure armed with knowledge about these fascinating catamarans!

Understanding the Mechanics Behind Catamarans with Daggerboards

When it comes to sailing, catamarans have gained considerable popularity due to their stability and speed. But what sets these sleek vessels apart from traditional monohull sailboats ? The answer lies in their unique design, particularly the incorporation of daggerboards. In this blog post, we will dive deep into understanding the mechanics behind catamarans with daggerboards, shedding light on why they are favored by sailors all over the world.

To begin with, let’s familiarize ourselves with the fundamental concept of a catamaran. Unlike monohulls that have a single hull cutting through the water, catamarans boast two parallel hulls connected by a platform or bridge called the trampoline. This setup enhances stability and prevents excessive rolling, making them an excellent choice for those looking for a smooth and comfortable sailing experience.

However, it is worth noting that stability alone does not guarantee optimal performance . That’s where daggerboards come into play. These vertically oriented keels perform multiple functions that elevate a catamaran ‘s capabilities and maneuverability.

Firstly, let’s understand what exactly a daggerboard is. A daggerboard is essentially a retractable keel located within each hull of a catamaran. These boards are designed to slide up and down vertically through special slots or cases known as trunkings in order to adjust their depth beneath the waterline.

One of the primary roles of daggerboards is to counteract leeway – the sideways movement experienced by boats when subjected to wind pressure against their sails . By adjusting the depth of daggerboards on either side independently, sailors can effectively control leeway and sail closer to the wind without significant drifting off course.

In addition to countering leeway, these clever appendages also enhance upwind performance—a crucial aspect for competitive racing or efficient long-distance sailing . When fully deployed, daggerboards create additional lift as water flows over them at high speeds . This lift opposes the sideways force acting on the boat from the wind, allowing the catamaran to maintain a more efficient angle into the wind and achieve higher speeds.

Furthermore, daggerboards play a crucial role in preventing capsizing – an occasional nightmare for sailors. By adjusting the depth of daggerboards when facing strong gusts or turbulent sea conditions, sailors can maintain balance and stability, reducing the risk of flipping over.

It’s important to note that daggerboards are highly adjustable and require skillful handling by experienced sailors. Proper adjustment involves considering various factors like wind speed, boat speed, sea state , and desired sailing objectives. Fine-tuning these elements allows sailors to optimize performance in different conditions while keeping safety in mind.

While some catamarans utilize fixed keels or even foils instead of daggerboards, traditional daggerboard designs continue to dominate due to their simplicity, reliability, and cost-effectiveness. They offer versatility across a range of sailing styles from leisure cruising to competitive racing.

In conclusion, understanding the mechanics behind catamarans with daggerboards is essential for anyone looking to venture into this sailing realm. From countering leeway and optimizing upwind performance to enhancing stability and preventing capsizing; these retractable keels serve as invaluable tools in ensuring a safe yet exhilarating experience on the water. So next time you see a catamaran gliding effortlessly through waves with precision-like control, you’ll have an appreciation for the intricate role played by its trusty daggerboards.

Why Choosing a Catamaran with Daggerboards Can Revolutionize your Sailing Experience

Choosing a catamaran with daggerboards can completely revolutionize your sailing experience, taking it to new heights of performance and excitement. These sleek and innovative designs offer numerous advantages that will leave you wondering why you ever sailed on a traditional monohull.

Firstly, let’s talk about speed. Catamarans with daggerboards are known for their incredible acceleration and high top speeds. The combination of the streamlined hulls and adjustable daggerboards allows these vessels to slice through the water effortlessly, leaving monohulls in their wake. Imagine the thrill of gliding across the waves at exhilarating speeds, feeling the power of the wind pushing you forward – an experience that will make you truly feel alive.

But it’s not just about speed; catamarans with daggerboards also excel in upwind sailing. Due to their narrow beam and powerful sail plan, these boats can efficiently navigate against the wind , tacking smoothly without losing momentum. With each tack, you’ll notice how effortlessly the daggerboards optimize your angle towards the wind, giving you an advantage over other sailors struggling to maintain course.

One of the most significant advantages of catamarans with daggerboards is their ability to sail in shallow waters. By retracting the daggerboards partially or fully, depending on conditions, these boats can access secluded beaches, anchor closer to shorelines, or explore hidden coves inaccessible to larger vessels. The flexibility and freedom they provide allow for endless possibilities when it comes to island hopping or discovering remote destinations.

In terms of stability, nothing compares to a catamaran with daggerboards. Unlike monohulls that heel dramatically while sailing at high speeds or encountering rough seas, these two-hulled beauties remain steady as a rock thanks to their wide stance and deep-draft daggerboards. You’ll appreciate this stability when cooking onboard during passage or simply enjoying a relaxing day out on calm waters without being constantly tossed around by waves.

Furthermore, catamarans with daggerboards offer a spacious and comfortable living area. With their open, airy layouts, these vessels provide ample room for entertaining guests or accommodating a large group of family and friends on extended voyages. The absence of heeling also means there’s no longer any need to adjust your lifestyle to counteract the boat’s movement, allowing you to live onboard with ease and comfort.

Finally, catamarans with daggerboards are often praised for their low fuel consumption. Due to their lightweight construction and reduced drag caused by the daggerboards, these boats require less power to propel them through the water compared to traditional monohulls. This not only saves money but also serves as a step towards environmentally conscious sailing .

In conclusion, choosing a catamaran with daggerboards will undoubtedly revolutionize your sailing experience. From the exhilarating speed and upwind performance to the ability to navigate shallow waters effortlessly, this innovative design offers unmatched advantages that will enhance every aspect of your time on the water. Get ready to embark on an unforgettable adventure where excitement meets comfort and where possibilities become truly limitless!

Tips and Tricks for Maintaining and Caring for Catamarans with Daggerboards

Title: Mastering the Art of Catamaran Care: Unleashing the Potential of Daggerboards

Introduction: Ah, catamarans! The epitome of grace and freedom on water. These magnificent vessels offer a unique sailing experience, especially if equipped with daggerboards. These retractable appendages not only enhance performance but also require special attention when it comes to maintenance and care. Today, we are here to unveil our arsenal of professional, witty, and clever tips and tricks for maintaining and caring for catamarans with daggerboards.

1. Raise Your Daggerboard Awareness: To truly understand your catamaran ‘s daggerboards, it is crucial to comprehend their purpose and functionality. Daggerboards act as underwater foils that counteract lateral forces, providing stability and control while sailing. Take time to study their design, engage in valuable online discussions or seek guidance from experienced sailors.

2. Regular Inspection is Key: Just like any other component on your vessel, regular inspection of your daggerboards is essential. Check for wear and tear, potential damage or cracks in the boards themselves or within their housing compartments. Be thorough during inspections to nip any issues in the bud before they snowball into costly repairs or replacements.

3. Smooth Operators: Lubrication Matters! Smoothly operating daggerboards directly impact your sailing experience; squeaky boards are no one’s favorite soundtrack out at sea! Regularly lubricate the sliding mechanisms using suitable marine-grade lubricants – avoiding excessive amounts that could attract dirt or grime – ensuring silent sailing moments that will make you look like a seasoned pro.

4. The Battle Against Corrosion: Saltwater can be both a catamaran’s best friend and sworn enemy simultaneously—the latter being particularly true for metals prone to corrosion. Apply protective coatings or paints specifically designed for underwater use onto metallic portions exposed to oceanic elements surrounding your daggerboard system.

5. Float Like a Feather: Balancing Act: Balance is the key to successful catamaran navigation . Daggerboards play a significant role in maintaining equilibrium while underway. Monitor their vertical alignment carefully, ensuring they are both correctly deployed and fully retracted when needed. Avoid compromising performance by avoiding conditions that push the limits of your daggerboard’s deployment range.

6. Cleanliness above All: Just as your daggerboards slice through the water realm, they can also gather unwanted hitchhikers along the way. Regularly clean their surfaces to eliminate marine organisms, barnacles, or algae that, if left unchecked, can affect hydrodynamics and impose unnecessary drag on your vessel’s overall performance.

7. Seek Professional Guidance: When in doubt or dealing with a problem you cannot confidently resolve yourself – never hesitate to seek professional help! Experienced boat builders or naval architects can provide invaluable advice tailored specifically to your catamaran and its daggerboard configuration.

Conclusion: Catamarans equipped with daggerboards offer an exceptional sailing experience that deserves meticulous care and attention. By following these professional, witty, and clever tips for maintaining and caring for such vessels, you’ll ensure smooth operations and prolong the lifespan of your beloved catamaran with ease. So set sail confidently into endless horizons as you master the art of catamaran care – unleashing the full potential of those marvelous daggerboards!

Daggerboards or Mini Keels for Catamarans?

Comparing fixed keels and daggerboards.

Fin keels, fixed keels, minikeels, skegs. Call them what you like, we know what you’re talking about. Choosing between fixed keels and daggerboards is probably one of the most debated options for a cruising boat and a difficult decision for a first time boat builder or purchaser. There’s no doubt high aspect ratio daggers give the optimum lift to windward and quicker tacking, but how significant is the downside of going to fixed keels, and are there significant disadvantages to living with daggerboards?

Fixed keels often get a bad rap. But it’s largely because there’s a lot of fixed keels out there that aren’t well designed. Poor section shapes and too shallow are the main problems.

Not all fixed keels are created equal, and because fixed keels by nature have a lower aspect ratio than a daggerboard, the foil section and planform (side view) selection are critical to minimise the tip loss - or the flow that runs under the keel and reduces the lift which provides windward ability. Obviously a relatively deep keel of moderate length will develop more lift than a long shallow keel, and this can be further improved by fitting an end plate to the base of the keel.

Construction Time and Cost

The dagger and dagger case combination probably take a little longer to manufacture and install and you will need to use carbon in the spar caps, but otherwise there is no significant difference in materials costs.

However for daggerboards you do need to pay particular attention to the hull to dagger case bonding areas which need to be de-cored and strongly reinforced. Also there is the additional hardware involved in the controls required for daggerboards, and a little extra deck clutter.

Asymmetric boards? These are totally inappropriate on a cruising cat in my view. With asymmetric boards the windward boards should ideally be lifted each time you tack or it will be causing drag. This means each board needs to be larger to get the same lift. An unnecessary complication for a minimal difference in performance on a cruising boat.

Building Implications

The keels are at a disadvantage here in that the building space will require 500mm or more of roof height if they are attached to the hulls at the start of the project. This also means more climbing and more scaffolding to work on the boat. One option here is to fit the keels and glass tape them to the hulls after the boat is extracted from the building space and lifted to the required height.

Performance Comparison

The difference in windward performance between fixed keels and daggerboards on cruising cats varies depending on the conditions. In very light airs the daggerboards have a clear advantage, providing reduced wetted area and greater lift at angles of attack where a large percentage of the fixed keel’s area is likely to be suffering from flow separation. The boat with a fixed keel is likely to point nearly as high as one with dagger boards, but will lose ground though increased leeway.

As the wind strength increases the fixed keels will typically operate much more efficiently and from personal experience the difference in performance between two similar cats -one with efficient fixed keels, the other with daggers - is minimal in 10 knots or more of breeze, and negligible in 15 knots and above.

The boat with the fixed keel might be expected to suffer more friction drag downwind due to increased wetted area, but once again from personal experience this disadvantage is only clearly evident in light airs.

Other Factors

Most of the cruising boats I have designed have been fitted with fixed keels - even though an option for dagger boards is provided in the plans. This is mainly because of the advantage of being able to dry the boat out on the beach with the hull bottom easily accessible for cleaning, but also for the protection the keel provides to the rudder and sail drive leg.

These factors don’t rule out dagger boards - most boats will sit on the hull bottom and the rudder without suffering damage to the rudder stock - however I do recommend that the dagger board, if fitted has a restraining strap or line which can be released to prevent the board being raised above the height of the rudder tip or sail drive leg when sailing.

Keep in mind that with fixed keels you will have less draft than a boat sailing with the boards fully down so the chance of a grounding is increased with daggers, and because the fixed keel has an angled entry profile it is less subject to damage from a sudden collision. Dagger boards take very high loadings and cedar and glass construction is generally more forgiving than amateur composite construction.

Daggerboards can be noisy inside the case, both when raised or lowered. This problem can be minimised with soft bearings at the top and bottom inside the case (synthetic grass or carpet) but is not always easy to completely avoid.

On a boat any bigger than about ten or eleven metres the daggerboards are a big chunk of stuff and can be difficult to raise and remove from the boat for maintenance.

We sometimes hear the argument that fixed keels could cause the boat to trip and capsize sideways in a sea. In steep seas you're most likely to be running (possibly with a drogue) or laying to a sea anchor.

I've never heard of a cat tripping sideways over its' keels but please enlighten me if this has been the case.

Making the Decision

I generally recommend that daggerboards are a worthwhile investment if the owner has a preference for sailing to windward rather than motoring or waiting for a favourable breeze, and if the boat is going to be kept light enough to have a power to weight ratio that will do justice to the dagger board configuration.

As a rough guide I would suggest that a 40’ cat which had a sailing weight of six tonnes or less would benefit from dagger boards, while a relatively heavy cruising cat would gain very little benefit from the more efficient foils. On a 50’ cat the cut off point is probably about 10.5 to 11 tonnes.

Dagger boards should be at least partially raised when reaching at high speed, and the need to raise and lower the board at various times is an added complication that a lot of cruising people would prefer not to have.

Daggerboards do break from time to time. Until now I have not heard of a cat having a structural problem with fixed keels, except for one that was washed sideways across a coral reef and then mercilessly pounded by waves. In that case the keels may have provided some additional safety.

Generally speaking cruising cats with fixed keels are probably easier to resell than cats with daggerboards. If you’re finding it difficult to make the decision and you're not interested in racing then it’s likely that fixed keels are right for you.

Join the Newsletter

Scroll to top

Aeroyacht Multihull Specialists Catamarans for Sale

About Aeroyacht
Aeroyacht Design
Aeroyacht TV
Mission Statement & Privacy Policy
Aeroyacht Racing
Favorite Links
Customer Testimonials
Office Location
BUY A MULTIHULL
Specifications
Photo Gallery
Try Before You Buy
Yacht Ownership and Demo Sails
BUY A POWER CATAMARAN
Yacht Business Ownership FAQ
MULTIHULLS FOR SALE
Aeroyacht Superyacht Catamarans
Global Multihull Search
Buy A Multihull
Sell a Multihull
Multihull News
Publications & Articles
Commissioning & Delivery Services

Multihull Keels and Daggerboards

Fountaine Pajot BELIZE 43 resting on her keels, showing good bridge deck height

Uncovering the compromises of both underwater appendages and analyzing their disadvantages and merits.

Man has learned much from nature, and sailboats and their underwater appendages are one of the areas that we have applied what works and what doesn’t. As we all know, boats – as most things in life- are compromises and often we are prepared to make concessions in one area in order to gain an advantage in another. Not only should this brief discussion illustrate the basic virtues and drawbacks of daggerboards and mini keels on multihulls, but also point out their active and passive safety aspects.

Most multihulls in todays marketplace come in two varieties. By far the vast majority of the production cruising catamarans (about 90%) are keelboats and have low aspect ratio, unballasted keels. These well known French, Australian or S.African boat manufacturers market their boats for private ownership and the charter industry and make a great product. Without sounding too general, these boats have very spacious interiors and are perfectly adaptable for live aboard families or the charter trade. This multi million dollar charter industry, has an obvious influence on the requirements and design of their charter fleet, which further has a trickle down effect to other builders who also market their cats for private ownership. Design parameters for these charter cats are often centered around 2 week multiple family vacations in the steady Trade Winds and day sails between closely spaced islands of the Caribbean. The features of these keel catamarans obviously put less demand on pure sailing performance or extreme upwind sailing characteristics, but rather try to please by offering solid construction, live aboard comfort and simple and reliable handling characteristics.

The other type of multihull is the catamaran with articulating daggerboards or centerboards. Centerboard and daggerboard multihulls both share the same basic concept, except their deployment and storage relies on different principles. The daggerboard lives in a scabbard, or daggerboard trunk. It moves up and down, vs. a pivoting centerboard, which is raised and lowered around a massive pin. High aspect ratio daggerboards are by far the most efficient foils. They have none of the problems associated with centerboards, which when fully lowered are only braced by a small area on top. When going upwind in a hurry, loads on the trunk act as a giant lever, which constantly work to spread the trunk apart. This is the reason why it is recommended to operate foils as pairs in heavier conditions to divide the loads. Also the large area of the remaining centerboard slot creates a lot of unwanted turbulence making them unpopular for performance minded sailors. Lastly declining popularity of the centerboarders can also be lead back to the often large intrusion on the interior space the trunks create. Although the Gemini catamaran is a good example of a very popular and well thought out production catamaran, there are few other mass produced centerboarders around. It should be noted that one great advantage centerboards have vs. any other underbody configuration is that they theoretically retract when colliding with an object. In spite of this, most offshore or performance orientated sailors clearly favor daggerboards or low aspect ration keels.

Illustration A

Daggerboard catamarans have several advantages over their keel counterparts, some of which are well known and others that are more subtle and sometimes only recognized by people who have used them. Active safety aspects are advantages created by speed and the ability to retract underwater appendages.

I am a firm believer of “faster” rather than “slower” on ocean going performance multihulls. Many people might say, going fast is only for racers. But lets think about this. The ability to reduce exposure time through speed is invaluable for cruisers. If say on a transatlantic passage you can shave off 5 days you have already increased your safety factor, in some cases, by 25%. Not being a “sitting duck” is a nice thing indeed. By being able to have the choice, bad weather can be avoided, which can sometimes lead to a negative spiral of incidences. In general, especially on long passages, a daggerboard cat will have the edge on speed over her keel counterpart.

Lets face it, we are all in it for the fun of sailing as famed designer Francis L. Herrshoff said: “The fun of sailing is directly proportional to the speed of sailing”. Maybe this is the reason he designed Amaryllis, his revolutionary catamaran, which was later banned from racing. Generally speaking daggerboard catamarans will always be slightly faster than their keel equivalents. The speed advantage of most daggerboard catamarans vs. keel catamarans though is often exaggerated. On a typical day sail a well trimmed and tuned keel cat will only be slightly slower than a daggerboard cat.

Multihulls lack the feeling of being in the “groove”, which monohull sailors enjoy. Effortless high average speeds, acceleration and sustained high velocity surfs is something fast multihulls compensate with. It should be noted that anything (even a barn door) surfs in the right conditions. Even keel catamarans can surf at speeds up to 30 knots down large seas.

Upwind Advantages: Depending on sea state going upwind, daggerboard catamarans vs. their keel relatives will point up to 5 degrees higher and also experience 2-5 degrees less leeway, which isn’t much one would think. But in an uncomfortable 100 mile beat this ads up to being more than 17 miles closer to your destination! (Illustration B).

Illustration B

sin A=a/c (sin A) c =a (0.1736) * 100 = a a = 17.36 miles

Lets take a 45’ catamaran: the lift (to windward) generated by a daggerboard is almost twice that of a low aspect ratio keel and the drag with the board all the way down would be almost 20% less. The most recent generation cats with large beams and stately bridge deck houses benefit especially from high lift foils, since the windage of their projected area can ad up quickly. The same cats with keels usually suffer from excessive leeway and sideslip. Keel cat’s however, especially in a calm sea state, lessen this disadvantage as boat speed and flow over their keels increases.

Reaching and Running Deep: When running deep in fresh conditions the fixed could act as a brake, that one cannot disengage. Since they cannot be retracted, their volume and resistance slows the boat’s progress and in combination with the forward pressure of the sails forces the bows down. This is especially the case with catamarans that have long bridgedecks, heavy extremities and low volume- fine bows. The bigger the friction in the water, the bigger the pressure on the mast and the more the boat is burdened. Another neat trick is lifting the daggerboards, one can actually increase apparent wind by pointing up and induce leeway, crabbing faster to ones destination.

Tacking and Helm Feedback: Cruising catamarans are often mistaken to tack slowly and behave sluggishly to movements of the helm. This is certainly true for some heavy keel catamarans and much less so for ones equipped with boards. In complex seas, some of the heavier keel cat’s only option for a safe tack is back winding the jib. Monohulls with only one fin will always tack quicker than multihulls, just as foil equipped catamarans will be more responsive than keel multihulls. Modern hydraulic steering systems are easy to build and with most forward helm stations behind the main coachroof, pose sometimes the only alternative for the builder. Mechanical steering and daggerboards will give the ultimate feedback and fun at the helm…if one is driving at all, since usually the autopilot is engaged for longer legs.

Inclined foils on the Aeroyacht H42 performance catamaran built by Edel

Another advantage of daggerboards is the better maneuverability under one engine. If you loose one engine and retract the board on the hull which has no engine power, but leave the powered hull’s foil down, the boat will turn easier. Because of the retracted foil on the un-powered side there will be much less drag induced turning moment, the boat will be more balanced and the other sides deployed board will provide sufficient bite for “survival” steerage. Especially in high crosswind situations a catamaran with both boards down is much easier to maneuver than one with shallower keels. Usually harbor maneuvers under power are low speed operations, and this is where the high lift capacity of twin boards excel yet again and facilitate handling and precision steerage. Daggerboard cats also can motor a bit faster, since by retracting the foils they have less resistance.

Keel and daggerboard cats usually have less draft than keel monohulls, opening access to shallow anchorages. An advantage daggerboards have, are their gauging characteristics when entering shallow harbors or unknown territory. By lowering them, one actually creates a “safety depth”. When they touch bottom one still has the possibility of raising them, performing a U-turn and getting into deeper water. With fixed- non retractable keels, especially with a monohull, groundings or unplanned bottom encounters could end tragic. At least a monhull can attempt in heeling the boat to reduce draft and re float. This obviously is not an option on a keel cat. If you get stuck in the mud you are dedicated to await the next high tide to get you off. Crashing into a coral reef could be a different story altogether and only a haul out can asses and repair damage. Depending on their design, boards could be rotated or flipped, and even repaired underway. In general daggerboard cats also have less draft than keel multihulls allowing access to even more harbors and anchorages. They can be beached high up for repairs or inspections, increasing the window of exposure time between tides. I know, I once performed a 5 hour long emergency repair on our 43’ catamaran this way, saving 1000’s in yard bills and days of headaches.

It should be notes that keel catamarans however, can be beached just as easy as daggerboard cats. They can be left sitting, high and dry, completely safe on their keels, without having to worry about damaging the hulls or getting debris or sea life stuck into the vulnerable daggerboard trunks.

Bruno Nicoletti is an old friend and one of the most low key-expert sailors I know. He has logged more than 130,000 miles (geriatric miles as he calls them) on his 44’ daggerboard catamaran.. At a recent meeting with him in France we talked about his experiences of his record, double handed – one stop- Southern Ocean circumnavigation at age 63. The French Press compares Bruno to sailing legend Vito Dumas and has published his accounts in an article called: “The Impossible Route”. He explained, that in the Southern Ocean, in the most convoluted conditions he would simply raise both boards, lock the helm to windward and lay a-hull with no sails. “Brumas Patagonia” would safely slide down the steep faces of waves and minimally drift to leeward at about 1 mile per hour while he was either resting or reading. The water spoil of his side wards drift would help keep the edge off cresting waves and often prevent them from breaking (Illustration D) While it was blowing 70 knots and higher he felt very safe and in fact the world around him turned peaceful and quiet. His confidence in this system is impressive: I am currently helping him with sea trials on his new 47 footer for a yet another go at a High Latitude – geriatric- circumnavigation. This time he is planning to take his 78 year old brother and do it non stop !

Illustration D

It is not only in the Southern Ocean that one encounters steep, breaking waves. Major capes or the Gulf Stream are notorious for rough conditions where the ability to navigate safely becomes imperative. In these environments any proven and strongly built daggerboard cat would have a slight advantage by lifting her boards, although a well designed keel catamaran could get through unscathed. In extreme weather, and I am talking beyond Force 10, it is very important to enable a catamaran to side-slip rather than encouraging the possibility to trip, and maybe flip. A catamarans behavior in towering side waves is decisive and the possibility to lift underwater appendages is essential, especially if one has lost the ability to steer. The disadvantage of a keel catamaran in huge beam seas is more psychological than real, as these types of vessels typically also slip sideways. In survival conditions or emergencies, the use of parachute anchors, which force the boat into a certain attitude is often thought to be the only answer for most boats. In my mind this tactic is questionable since it puts enormous strains on the boat, is accident prone and renders one helpless when the odd rogue wave from a different direction smacks into the boat. It is better to manage survival conditions, by controlling and slowing the vessel with the use of drogues.

We have learned a great deal from aerospace industry and the trickle down effect to monohull keels. Multihull designers and builders greatly profit from the advanced research, that has been done in the field of NACA sections (National Advisory Committee for Aeronautics) and foil performance. Keels and daggerboards come in a variety of aspect ratios but most are based on low speed foils, which drag/lift characteristics have been optimized. To increase lift even further, some performance catamarans even utilize asymmetrical shaped daggerboards, shaped flat on the outside (leeward) and cambered on the (windward) inside. As they can only be used one at a time asymmetrical boards are somewhat limited in their adaptation for cruisers. (Illustration E)

Illustration E

Since multihulls do not heel, their underwater appendages are more effective in retaining positive flow than their monohull relatives.(this is also the reason why autopilots burn out less often and can be used in heavier conditions on catamarans) As the monohull heels, not only is the upper part partly blanketed by the underbody of the vessel but also flow is lost as the water slips past the angled keel to leeward. (Illustration F) This was especially prevalent on the early IOR monos, which had extremely beamy and shallow bilges and high prismatic coefficient center sections. To compensate for this loss of heel induced flow, monhulls need deep draft keels to make good progress to windward. The keel or daggerboard catamaran on the other hand can more efficiently create lift for the same keel plan view area, not only because it has two vs. one keel, but also through its minimal heel is able to keep its underwater appendages perpendicular in the water.

Illustration F

Usually catamaran daggerboards have a higher aspect ratio and are deeper than the equivalent length monohull, since they have the ability to retract them and therefore have no draft considerations. It is therefore not surprising to see that in wind speeds starting at around 10 knots a well designed and sailed daggerboard cat, will often outpoint and outpace a performance monohull. Even well sailed keel catamarans can often arrive earlier at an upwind destination compared to heavy monohulls. The couple of degrees they sacrifice in their ability to point to windward is often made up by their higher speed and VMG (Velocity Made Good). This performance difference increases proportionally to the wind speed and is very noticeable in F.4 conditions and beyond.

A well known fact and possibly the single biggest psychological deterrent of daggerboard cats is the vulnerability of the boards and trunk in collisions. The true Achilles heel are actually ill constructed and designed trunks, which cause flooding in an impact. This obviously is not the case with keels, which would deflect a minor obstacle, or in case of hitting a container or whale, simply break off. In the case of sacrificial keels, they would sheer leaving the hull completely intact.

Obviously the most critical area in daggerboard design is the construction of the daggerboard trunk. It is usually heavily reinforced with massive gussets, especially at its aft bottom end and extends from the bilge to the overhead. Typical forces on the trunk easily exceed the pressure of the wind on the sails. Dynamic forces of wave action and the shock loads of slamming into seas or solid objects must make this area one of the strongest and best engineered of the entire vessel. Usually the foils are located just aft of the main- mast bearing crossbeam and are somehow tied into this unit to profit from its stiffness. The more “left over” daggerboard remains in the scabbard in the fully down position, the better it is braced, so it is not surprising to see foils that are 18’ long for a 60’ boat. Builders who take their job seriously go through great lengths to make this key area as strong as possible. In a recent conversation with the manager of a reputable French production yard it was pointed out that the daggerboard trunk is engineered and constructed 7 times stronger than the composite board. In case of a violent impact, the foil, which has weak spots designed into it, will snap and leave the daggerboard trunk unscathed. It is a type of sacrificial impact philosophy or a safety fuse, just as it is used on sacrificial fixed keels. The careful engineering and experience necessary in building reliable daggerboard or keel cats stresses the importance of a production yard, which has consistently built them. This aspect should not be taken lightly if one ventures out into the open sea, even if it is only 20 miles offshore.

Often builders of keel cats ad daggerboards to their designs, with the objective to market increased performance and safety. This usually ends up in a compromise, since the hydrodynamic hull requirements of both types could differ substantially, let alone the experience of proper integration, engineering and construction might be lacking altogether. Building with keels does not require the experience, careful construction and engineering which are necessary with retractable foils.

Keels offer advantages, as they do not need to be operated at all. They do their work silently and its usually one less thing to go wrong. On the other hand people who have never sailed with daggerboards think their operation is complicated. In fact they are as easy to use as outhauls or travelers. In normal conditions with 2 people – one pumping the daggerbaords up haul line directly at the board- the other taking up the slack of the up haul, it literally takes 3 seconds to raise a 15’ daggerboard. Single-handed it is a 10 second affair involving 2-3 wraps of the up haul around a winch and 10 cranks. Most boards are slightly heavier than the water they displace and often only weigh 80 lbs. Dropping takes half a second, by simply opening the up haul sheet stopper and easing the foil down. Loads on the boards increase as the speed and pressure builds, so if one has the choice, these maneuvers are usually performed just before tacking. It is a misconception that the operation of foils will depend on the wind speed. It is rather the boat speed, in regards to sea state – which in turn limits progress – which dictates the proper positioning of the daggerboards.

Nothing is perfect and this analysis would be worthless without mentioning the pro’s and con’s of either underwater appendage. Daggerboards, their surrounding structures and systems are more expensive to build, so builders prefer to stay away from them given the choice. In some catamarans, especially smaller ones or ones that have the trunk in the center of the hull, the interior passage in the hulls can be crammed. Lastly it should be mentioned that incorrectly designed and constructed, daggerboards multihulls can be more of a detriment than virtue and in some cases can be extremely dangerous. If the trunks are not massively reinforced and in case of a violent collision one could flood one hull and cause a capsize. In this case one is better off with a well designed and constructed keel multihull than a mediocre or untested one with daggerboards.

Yet daggerboards give you choices, that keels deny you. It is like the new generation of cars with Tiptronic gearboxes, which offer you an automatic transmission with manual override. By physically selecting the proper gear, torque can be adjusted to suit the conditions. It’s the same with the daggerboard equipped catamaran. The boat can be fine tuned to optimize the level of efficiency of the vessels motion through the water. By being able adjust the foils, superior sailing characteristics result in speed and generally more fun on the water. Active safety aspects of reduced exposure time, better maneuverability and shallow draft provide significant benefits.

For safety reasons, most catamarans builders opt for fixed keels and completely separate the keels from the hulls, a feature which preserves and protects the water tightness of the boat in the event of violent impact. Furthermore, if such a situation arises, it makes them easier to repair or replace. Fixed keels require no manipulation, such as daggerboards and give perfect protection to drive shafts, propellers, rudder blades and hull bottoms in the event of grounding. Lastly the absence of a centreboard case means saving of space in the interior of the vessel and usually results in a larger living space.

Back to the birds. We all know the giant Albatross as an extreme example of a sorer that can glide for days in varying conditions, without having to move its wings. This Southern Ocean beast, who calls his home the most inhospitable area on our planet, is better adapted to handle extreme circumstances than any other flying animal. The Albatrosses’ wings are sophisticated in shape, but basically are articulating high aspect ratio foils very similar to daggerboards. Similar to the Falcons “high speed” wings, the Abatross can modify its wings aspect ratio to adjust to the breeze. The designers of the Polynesian multihulls, legendary Viking long ships and American Cargo Schooners understood this too. By adding movable leeway devices, center- or daggerboards, they made their boats more seaworthy and even sailors in the past preferred them over fixed keels.

Today we continue to strive to find the perfect compromise in our vessels to satisfy our most important requirements. We should be extremely thankful to the 1000’s of keel multihulls that have revolutionized the charter industry and many good boats have evolved from this trend. Reputable dagger board catamarans and well designed keel multihulls will continue to be the choice of future generations of serious offshore voyagers. Both offer their advantages and disadvantages and it is important to understand both in order to make the proper choice.

Gregor Tarjan, a trained naval architect and longtime multihull enthusiast is writer of numerous articles for Multihulls Magazine and various other trade publications. He has been involved in Dennis Conner’s “Stars and Sripes” 1984 Americas Cup Campaign, is the founder of Aeroyacht.He is also the co-editor and contributing author of the “Sailors Multihull Guide”, the book by Kevin Jeffrey.

Social Share

Catamaran news.

Nautitech 46 Price Drop

McConaghy Chase ZERO Hydrogen Powered Yacht

McConaghy Multihulls Nominated for Design Award – McConaghy 75 and MC83 Power

The Stunning Interior Design of the McConaghy Multihull Range

Nautitech Spareparts – Order Simple and Quick

Catamaran Steering Positions
Catamarans vs. Monohulls
Catamaran Learning Center
Catamaran Speed
Catamaran Efficiency
Catamaran Stability
Catamaran Safety
Catamaran Shallow Draft
Catamaran No Heel Sailing
Catamarans and Seasickness
Catamaran Space
Catamaran Boat Handling
Catamaran Advantages over Monohulls
Wave-Piercing Bows
Catamaran Sailing Schools
Catamaran Insurance
Catamaran Charter Business and Tax Savings
Ask the Owner
5 Valuable Tips
Survey Checklist
Sea Trial Checklist
MULTIHULLS & CATAMARANS App for Iphone
Catamaran Surveys
Multihull Services
Catamaran Build Consultation
Financing Services
Catamaran Repair & Service Facilities
Catamaran Demo Rides & Shows
Catamarans for China
Yacht Design
Interior Styling & Yacht Art
Photography

For Immediate Delivery – Nautitech 44 Owner Version

Yannick Bestaven’s NEEL 47 Trimaran

Conser 47/50′ FOR SALE

Planet Sail tests a McConaghy Multihull

Charles Caudrelier wins Arkea Ultim Challenge

Nautitech 48 – Control of the Wind

Boat Test: Nautitech 48 Open catamaran

NEEL 52 Trimaran VIDEO – Sailing at 17 knots

McConaghy MC63 Power Tourer – showing her pace

Nautitech 48 Open catamaran – Video

Helpful tips from aeroyacht.

AEROYACHT PUBLICATIONS

Catamaran books by gregor tarjan.

JOIN AEROYACHT’S NEWSLETTER

(215) 508-2704

Tao Catamarans
Dolphin Catamarans
Voyage Catamarans
Omaya Yachts
All Pre-Owned Catamarans
Exclusive TMC Catamarans
Sold Catamarans
Buying A Multihull
Selling A Multihull
Sailing Schools
Yacht Charters
TMC Newsletter
Employment Opportunities
Mission Statement
Affiliations

Performance Study of Daggerboards Versus Keels

Story by Phillip Berman / August 17, 2018

By: Phillip Berman, published with editor’s permission from Boating NZ and Blue Water Sailing

In my forty-five year career in the catamaran industry there’s been a relentless debate on the virtues and vices of daggerboards versus fixed keels. This debate has, however, mostly been waged without “hard numbers” from which to compare performance differences. As we have had requests at Balance Catamarans for both keels and daggerboards, Anton Du Toit (my design partner) and I felt we should conduct a study, the results of which follow.

When we first set out to design and construct the Balance 526 we were aiming for cruising couples who wanted more performance and quality than they could find in mass production cats, but also more interior space, payload capacity and ease of use and maintenance than consumers focusing primarily on speed. Our intent was to find the balance – not to create the “lightest and fastest 52” in the world, or the “largest 52,” but a catamaran that could sail swiftly on all points of sail, carry significant levels of payload, yet still be gracious to live on. We also wanted her to be pleasing to the eye.

Our focus at Balance brings us an interesting range of buyers, some of whom are more focused on strength, space, safety and comfort rather than all out speed (cruiser types), others who are more speed focused, less value oriented, and prepared to give up comfort, ease of operation and payload capacity to go a bit faster (racer types). The later sorts of buyers are mostly what I affectionately call “spreadsheet guys.” (Full disclosure: I am not a spreadsheet guy. I am far more focused on how a boat lives, how tough she is, what she can carry, and how simple she is to sail and maintain without a professional crew.)

As we have gone along a few of our customers have asked if we would create the 526 with performance keels rather than daggerboards. They felt that the advantages of keels trumped the performance advantages of boards. We were happy to comply, so Anton set about to design high performance keels for the 526. (Note: On our 451, we only offer her with dual daggerboards and two shallow permanent fixed minikeels. On all other Balance designs it remains customer choice which configuration they wish to have.)

What we were not prepared to do was tell 526 buyers how much faster or slower the two different configurations would be. We felt it best to heed Lord Bryon’s advice to evade “kant and hyperbole” (the language of the day at boat shows!) so we hired the Wolfson Unit for Marine Technology and Industrial Aerodynamics at the University of Southampton to conduct comparative studies of the two configurations on identical 526 models. When you are comparing identical products with just two different variables it seemed a worthwhile study to undertake and share with our customers. It also becomes, to some extent, a worthwhile study for anyone considering a new or used catamaran purchase who is curious how the two different configurations impact performance.

While Anton and I believe these studies can be used by consumers to compare the relative performance differences between boards and keels, it is important to note that the 526 is a very light, narrowhulled epoxy performance cat and the keels we install are considerably finer, deeper and more carefullyshaped than those found on mass production designs. Additionally, we conducted the study with the daggerboards in the fully down position on all points of sail to reduce the studies complexity. The daggerboarded 526 would be marginally faster than the study indicates off- the-wind with boards raised due to a further reduction of wetted surface.

The disparity between keels and boards on a mass-production cat compared to a Balance or any other performance cat would be exaggerated considerably compared to the study that follows. I would note that we erred on the side of caution in setting our lightship weight for this study at 12.5 kg. We have carefully lode cell weighed our 5th boat and the actual lightship weight is 12,215 kg, or 26,930 pounds for the keeled 526 and 12,261 kg, or 27,030 pounds for the daggerboarded 526. Our lightship weight could be lower for customers prepared to put their boats on a diet, or sacrifice quality in several areas, but we have found that they want as much cabinetry as possible, folding tables, glass salon windows, Corian counter tops, and high-end flooring inside and out, etc. Spreadsheet guys miss the mark on this subject constantly in my experience. They also wrongly compare boats based on length, rather than the interior volume of the hulls and bridge – what I call the sum total of fiberglass parts. Regardless, the polars closely mimic the high performance our yachts have proven in real life cruising, fully laden, so this gives us great confidence in the studies accuracy.

Performance, of course, is not the be all and end all, so it is important to examine the advantages and disadvantages of boards versus keels beyond speed. They are as follows:

Advantages to Keels:

No moving parts. One less thing to operate or break.
If you ground the boat you hit the keels and they are easily repaired and at a low cost generally.
You can chock the boat more easily on the hard and it is easier to beach in some circumstances.
They cost less to fabricate.
You get more room amidships for additional cabinetry.
The keels add a bit of buoyancy. On a 526 about 1,600 pounds as our keels are large and mostly hollow inside.
Daggerboards are typically a bit heavier. On the 526 each board and trunk weigh about 50 pounds more.
Poorly designed boards and trunks can allow the boards to rattle when they are not under load. Keels do not rattle.

Advantages to Daggerboards:

Boarded cats point higher and side-slip less as the study shows. I have noted that on keeled production cats you can “stick them up into the wind” but they tend to crab horribly when pinched, as such that you must crack off considerably to reduce leeway and sustain momentum. On most of the sea trials I conduct on production cats we “close reach” to windward on sea trials. This is less the case on deep, finely shaped performance catamaran keels.
The draft on most keeled catamarans is deeper than the draft on daggerboarded cats. Our 526 keeled version draws about 12 inches more than the daggerboarded version. On daggerboarded cats the rudder tip usually represents her deepest draft. It is important to note that some cats carry very stubby keels to sustain shallower draft, but the shallower the keel the less well she performs when sailing close to the wind. This is important to keep in mind if you are comparing performance on fixed keeled production cats.
Off the wind with the boards raised to 1/4 there is less drag and the boat steers and sails faster and more playfully.
The daggerboarded cat is a bit faster and makes less leeway on nearly all points of sail as the study shows in the majority of wind conditions.
An equally efficient set of keels have much more wetted surface than daggerboards, almost 4 times more. This is the case on our 526 keels.
Daggerboards set properly can assist in preventing a cat from a “tripping capsize” in very high winds with large breaking cross seas. Both boards can be fully raised, or only the leeward board raised, so the boat can side-slip easily.
Daggerboarded cats tend to have a bit higher resale value due to the fact that so few are produced in mass production. A buyer that wants boards will only focus on catamarans that have them.

Shifting our focus now to the performance data generated by Wolfson Unit. Their analysis returned the predicted boat speed and leeway angle for the Balance 526 with a keel design and daggerboard design for all combinations of true wind speed from 4 to 25 knots and true wind angles from 40 to 180 degrees. We can begin comparing these two configurations by directly comparing the speed and leeway at major points of sail, specifically beating, close, beam and broad reaching.

While beating the two designs are predicted to perform as follows: To summarize the upwind comparison, the daggerboard design is, on average, expected to sail 1.5 knots faster and 1.75 degrees higher. While close reaching the daggerboard design has less of an advantage than when beating, as can be seen from Table 2:

While close reaching the daggerboard design is expected to sail 0.5 knots faster and 0.75 degrees higher.

As the true wind angle approaches 90° for a beam reach, the keel and daggerboards become more closely matched.

In the beam reaching comparison the daggerboard design will sail slightly higher with a leeway advantage of about 0.25 degrees but it’s speed advantage in 5 knots TWS of 0.3 knots will fade to a 0.5 knot deficit in 16 knots TWS. At this point of sail the two designs are considered to have equal performance as the differences in leeway and boat speed are negligible.

Finally, while broad reaching the following speeds and leeway’s are expected.

In summary, when broad reaching the daggerboard design regains a slight advantage, as it maintains an additional 0.5 knots of boat speed. Leeway differences are again negligible.

Considering the above analyses, it can be seen that the daggerboard design will typically not only outperform the keel design but also out point it, make less leeway close to the wind, therefore giving the daggerboard design a substantial advantage when racing, or for performance focused sailors.

This data gives a fair comparison of the two designs at specific true wind speeds and angles but in order to fully understand the performance trends and enable better predictions between them, one must consider the entire range of wind conditions and all points of sail. This is best done with the use of speed and leeway deltas, where the differences between the two designs are calculated and analyzed.

The following two figures display the average speed and average leeway deltas. The calculation process to determine the deltas is chosen such that a positive value for the delta indicates an advantage for the daggerboard design, and a negative value favors the keel design. For example, a speed delta of +2 knots and a leeway delta of -1 degrees means that the daggerboard design is 2 knots faster than the keel design under the same conditions but would sail 1 degree lower than the keel design.

Counter to this, while still on a beam reach but when moving from a low wind condition to a high wind condition, the keel design begins to perform better. This is now taken from the green line (14 to 25 knot TWS range) and gives a -0.6 knot reading. Therefore the daggerboard design is now expected to be about 0.6 knots slower than the keel design under the new, higher TWS conditions.

Figure 2 is used in the same manner as Figure 1 but shows the leeway angle of each design rather than boat speed. Focusing again on a beam reaching condition, the leeway deltas indicate that the daggerboard will always out point the keel design as all three lines (TWS from 4 to 25 knots) indicate. positive values of 0.3, 0.35, and 0.1 degrees at 90 degrees TWA. Overall, Figure 2 shows that the daggerboard design has a significant gain in leeway over the keel design at all wind speeds and angles. This reaches a maximum when beating (TWA ±40-45 degrees) of 2 degrees, and declines to zero when running (TWA ±180 degrees).

With respect to the average boat speed deltas, Figure 1 shows that the daggerboard maintains a higher boat speed when sailing in light and medium winds (red and blue lines in Figure 1). In stronger conditions (green line) the daggerboards yield better boat speed when beating but the keel surpasses this between TWA of 60 to 145 degrees. Keeping in mind that the study was conducted with the daggerboards fully down at all times, in reality, the daggerboards will be raised in the 60 to 145 TWA range. As such the study slightly underestimates the speed of the daggerboard design over this TWA range.

Overall the daggerboard outperforms the keel in both boat speed and leeway in the vast majority of sailing conditions and is thus considered to be the better design choice if achieving ultimate performance is the key criteria. It should be noted that this study is specific to the Balance 526, but corresponding trends can be expected in performance cats of similar size and design.

In the end, and it is a point I cannot stress enough to any boat purchaser, all boats are sets of compromises and trade-offs, and so too with features – helm designs, sheeting systems, rig layouts, bimini designs, bed designs and locations, baths, engine placement, etc. Because I have been deeply involved in brokerage catamaran sales much of my life I recognize there is no one right or wrong boat, certainly no perfect boat, only a boat that happens to be a better fit for a particular sailor and his or her budget, cruising agenda and specific aesthetic proclivities.

At least now we can say that if someone wants a 526 with keels, here is how she will perform compared to a boarded version. It is then up to the buyer to decide which configuration is the most appealing to them. I will say that, based on the five 526 we have sailing today, with over 60,000 miles of sailing behind them, those owners with keels seem quite happy, just as those with boards.

Alright spreadsheet guys, here’s your numbers to mess with!

Phil Berman is a former Hobie Cat World Champion and the founder of The Multihull Company, a global catamaran yacht brokerage firm. He is also the owner of Balance Catamarans, a boutique brand of high-end performance voyaging catamarans. He can be reached at [email protected] .

About Phillip Berman

Are you a Spreadsheet Guy?
Balance Catamarans is Born: A Bold Move in a Challenging Market
Can a catamaran really sail upwind?
Catamaran Depreciation
Catamaran Vs Monohull
Daggerboards vs. Keels
Lessons Learned From A Free Spirit
Placing a Boat Into Bare Boat Charter
Post Survey Negotiations
Saildrives or Straight Shafts? Which is Best For Me?
Seller's Guide To Yacht Sales
The 14 Biggest Mistakes When Purchasing a Used Catamaran and How to Avoid Them
The 14 Biggest Mistakes When Purchasing a Used Cat…and How to Avoid Them Part Two
The Perils of Internet Catamaran Shopping
The Ten Commandments of Buying a Catamaran

Join Us At The Annapolis Boat Show Aboard the Voyage 590

The multihull company announced as dealer for the voyage 590, 6 great starter catamarans, ian edmonson joins tmc as yacht broker in fort pierce, fl., the multihull company opens new office in virginia, the multihull company named exclusive dealer for dolphin catamarans and their new model, the dolphin 380.

Selling Your Catamaran in Panama

Categories: Articles , Articles by Phil Berman , Balance Catamarans , Catamaran Handling , Cruising Lifestyle , Design and Construction

Recent News

The Multihull Company is thrilled to announce its appointment as the exclusive distributor for Omaya Yachts, an exciting new brand of Power Catamarans built with precision at the esteemed Elica Yard in Silastra, Bulgaria. This exciting new partnership further solidifies The Multihull Company's position as a premier distributor in the maritime industry, offering clients unparalleled access to cutting-edge vessels designed...

The Multihull Company is pleased to announce the closing on the Balance 482 "SeaLife" We wanted to take a moment and thank her new owners on their amazing new catamaran, and to also congratulate our team handling the sale. TMC agent Andrew Hodgdon successfully represented the buyers on the sale of the vessel, while TMC CEO Will Miller represented the...

In early 2023, Cruising World approached us to seek our opinion on recommending a couple of brokerage catamaran options for first time catamaran buyers to consider when they first stepping into the catamaran market. Here are six boats hand-picked by The Multihull Company’s president and CEO, Capt. Will Miller, as excellent choices for brokerage-catamaran seekers. These are all worth a...

The Multihull Company, the world’s leader in multihull sales and service is excited to announce that it has been named the exclusive dealer for Dolphin Catamarans, a premier builder of high-quality catamarans, and their newest model, the Dolphin 380, designed by Philippe Pouvreau. "We are thrilled to be working with Dolphin Catamarans again and to be able to offer their...

Visit Us at the 2023 Miami Boat Show

The Multihull Company is thrilled to announce our participation in the Miami Boat Show, taking place on February 15-19, 2023. As one of the premier boat shows in the world, this event is the perfect platform for us to showcase our wide range of high-quality multihulls for sale. We are committed to providing our customers with the best experience possible,...

Introducing the Tao 452: On Display At The Annapolis Boat Show October 12 – 15, 2023

The Multihull Company is thrilled to unveil the new Tao 452, an exciting addition to the world of blue-water performance cruising catamarans. Meticulously engineered and crafted to perfection, the Tao 452 is set to redefine the catamaran experience for sailors worldwide. If you've ever felt the need for more sailing performance from your current production charter catamaran or been disappointed...

The Multihull Company is excited to announce its participation in this year's Annapolis Sailboat Show. The event will be held from October 12 - 15, 2023 in downtown Annapolis, and The Multihull Company will be showcasing the exquisite Voyage 590 catamaran from Voyage Yachts. The Annapolis Boat Show is a highly anticipated annual event that brings together boating enthusiasts, industry...

The Multihull Company is pleased to announce their appointment as a dealer for Voyage Yachts and their new model – the Voyage 590! The Voyage 590 is being celebrated as the ultimate, luxury sailing catamaran with all the comforts of home surrounded by panoramic views of paradise. She maximizes luxury accommodation and comfort, with the performance and blue-water capability characteristic...

The Multihull Company is thrilled to announce the appointment of Ian Edmonson as a yacht broker at its newly opened Fort Pierce location. Ian brings a unique blend of boating passion, brokerage experience, real estate expertise, and customer-focused mentality to the team. Ian's love for boating began at an early age and has only continued to grow, leading him to...

We are thrilled to announce that Alan Prater has joined The Multihull Company team as a Yacht Broker in Virginia covering the Hampton Roads area of Virginia. With a lifelong passion for the water and a career spent in the US Navy and as a maritime training professional, Alan brings a wealth of experience and expertise to our team. Alan...

Read All Articles

We take pride in our happy customers

Your team delivered on every mark. You’ve got an amazing broker in Mark Wattrus and I’m confident you will have continued success moving forward together. He was available 24/7 whenever I had questions. We had a great initial visit on the boat and his marketing plan and photos were superb

I bought a yacht that I had never seen. I did this because I trusted my broker Andrew Holland. It was not an easy job for Andrew, as I am an experienced boat builder and owner of previous yachts, but work in West Africa. Imagine how hard it was to communicate what I was looking for. Andrew came up with exactly what I wanted. He dealt with time delays, all my questions at odd hours, and was there for the survey. He reported honestly and professionally. After buying the yacht, I arrived at the boat on a Sunday night, after dark, after travelling from West Africa to the Caribbean, and found it was better than expected. He never pulled punches and made me aware of shortfalls. I expected to spend my one month leave working on the boat, but actually spent less than one week, and was able to spend 3 weeks sailing – wonderful bonus.

Thank you Andrew for putting up with all my questions, all my worries and all my crazy out of the time zone concerns – you were totally professional, but also I know that if and when we meet up, it will be like a friend finally meeting. You are always welcome on Aseka.

— Beverly Cory

Outstanding company with professional subject matter experts. If I were to buy or sell cruising sailboat, particularly a catamaran, Andrew would be my go to broker.

I have been sailing since I was a child and attended Massachusetts Maritime Academy. But when my wife and I began the process of purchasing an ocean cruising/racing catamaran, I realized that this is a world unto itself. Obviously, we needed to find someone knowledgeable to help us make an informed decision. More importantly, we needed someone honest and willing to put our interests before his or her own. I was lucky to work with Phil Berman at The Multihull Company. He repeatedly shunned the fast buck, choosing instead to work the long road to connect us with the “perfect boat”. I would be glad to recommend Phil and his company to anyone planning to purchase or sell a performance sailing machine.

— Eric Boutiette

Andrew Hodgdon was our broker when we bought our 2018 Lagoon 450F in Antigua in April 2922. He provided great service and was very attentive to our needs. We would highly recommend Andrew and the Multihull Company.

Trust & Expertise About Us

Successful relationships cannot exist without it. At The Multihull Company we base every relationship on a firm commitment to earning and retaining our client’s trust.

Advice of any kind is valuable only when grounded in hard-won expertise. It too, must be trustworthy. Trust and expertise define the heart and soul of The Multihull Company. We are a team of skilled professionals who thrive on providing expert, trustworthy advice and service to catamaran and trimaran sailors around the globe.

Pre-Owned Sales

Global Locations

New England +1-267-324-9067

Philadelphia +1-215-508-2704

Virginia +1-757-407-2526

Annapolis +1-703-350-8160

Charleston +1-843-364-4123

Brunswick +1-937-243-2213

Saint Augustine +1-910-477-2508

Fort Pierce +1-340-473-7469

West Palm Beach +1-561-312-0010

Ft. Lauderdale +1-215-508-2704

Miami +1-513-677-5338

San Francisco +1-215-508-2704

Seattle-Tacoma +1-206-297-1151

St. Martin +590 690 58 66 06

Grenada +1-473-457-3245

Puerto Rico +1-787-379-7348

Panama +1-305-735-1661

Trinidad +1-868-680-8909

Croatia +385 95 849 8009

France +33 (0) 6 73 97 17 30

Mauritius +1-215-508-2704

Australia +61 (0)7 5444 4822

Cape Town +1-843-614-2028

Log in or Sign up

You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser .

Catamaran daggerboard design and use

Discussion in ' Multihulls ' started by Steve W , Aug 2, 2017 .

Steve W Senior Member

I am a bit confused over the pros and cons of different types of daggerboard setups. A lot of performance cats such as those designed by Tennant, Grainger etc use boards installed down the inside face of the hulls meaning that the board is vertical when the windward hull us just clear of the water whereas a lot of newer cats are installing them following the outside angle which to me seem less than optimal for a couple of reasons such as being more difficult to operate hanging out over the water usually requiring some kind of apparatus to raise them and also longer boards since you cant cantilever them down inside the trunk so , more weight, also it would seem to me that as the boat lifts a hull the board would be less vertical so provide less lateral resistance so maybe need more board deployed. I'm talking straight boards here, c foils would seem to be worse still at providing lift ( as in to weather, not upward lift) Using a straight board following the angle of the outboard face of the hull does not seem like enough angle to provide significant hydrodynamic lift to me to be worth the disadvantages ( hence c foils) but I could be wrong, just trying to understand the reasoning. Steve.

Doug Lord Flight Ready

If you haven't seen it, this article may be of some help: Daggerboard Debate http://www.proboat.com/2010/04/daggerboard-debate/

jorgepease Senior Member

That was a good article!

farjoe Senior Member

Are there any websites dedicated to the design and construction of homebuilt lifting foils for boats under 6m?

Don't know of any websites so far, but there is an excellent book: "Hydrofoils Design Build Fly" by Ray Vellinga and available on Amazon.

Doug Lord said: ↑ Don't know of any websites so far, but there is an excellent book: "Hydrofoils Design Build Fly" by Ray Vellinga and available on Amazon. Click to expand...

catsketcher Senior Member

Gday Steve One major reason is because of accomodation. Some early cats had vertical boards but these severely impacted the use of the hulls. So you have to go either outboard and cant one way or inboard and cant the other. From there it may come down to safety vs speed. For a non lifting board (all Tennats are non lifting) all the board does is provide a vertical force. In a racing boat that flies a hull and sails at a high angle an inward board will be more vertical when hull flying as well as easier to pull up and down. On top of this you don't have any worries about boards at the marina hanging over the side. Against this is safety. A little Aussie cat, the Seawind 24, had outboard boards that were heavily angled. Owners reported that when hit by a gust the boat would slide to leeward, lifting the leeward hull and pulling down the windward hull. The little Seawind was a pretty great boat. So a cruiser/racer designed by say Lock Crowther, that was not meant to fly a hull regularly would have the outboard boards. On my cat the boards are outboard and only have a modest cant. I have never flown a hull so it works pretty well. cheers Phil

UpOnStands Senior Member

Also, more recent cat designs tend to have more vertical outboard hull sides. This can minimize some of the problems.

Thanks guys, I used to own a Macgregor 36 cat that had a single vertical board in the port hull that you had to crawl past to get into the berth, It was a cantilevered board like Malcolm Tennants boats so the strong points were the bunk top and the hull bottom. On a cat with a single board vertical was probably a reasonable compromise but they went to 2 boards on later models. All beach cats are vertical (until the introduction of lifting foils) as they don't have accomodations to impact, although they are not cantilevered. It seems to me that unless you are getting significant hydrodynamic lift from the outboard boards they would be more of a pita as I would think they would need to be longer and need some kind of frame to raise them ( heavier). Even if you can push them down manually it can be precarious doing so, they can as Phil mentioned hang way out the side when raised and be less effective at preventing leeway as the boat heels and lifts a hull whereas the inboard style board gets more vertical so I would expect you would need less board deployed (less drag). So, what I'm curious about is if the lift generated by a board that is angled inward at, say, 5-8 degrees enough to be worthwhile given all the negatives in every other area in the real world ? I have a friend who bought a cat where the boards have been moved from inboard to outboard so someone thought it would be but who knows if it panned out. Grainger has some interesting thoughts on his website, he considers Mad Max to be one of the fastest cats in Aus and I see it still has its boards inboard. I'm sure the choice of inboard or outboard location at the design stage would depend a lot on the type of layout of the cat, ie, with a net and tube racing cat such as a GBE inboard is very convenient and simple whereas outboard would make more sense on a cat with a bridgedeck cabin but on a net and tube racing cat where efficiency is the only goal which way would you go? My other question relates to the actual use of the boards, how much to deploy on the various points of sail at different wind speeds. Obviously you would use more board upwind, less reaching and even less to none running but how much? I would guess that the more speed you have upwind the more lift you are generating so the less board you would need. It seems to me that you would want as little board as possible deployed for drag reduction but I don't know. Thanks for any insight, Steve.

groper Senior Member

to go upwind its pretty much more board the better. practical size limits the ultimate size. As to cant - the more vertical the better for upwind performance. some race boats cant them inwards so they are vertical once flying hull - not applicable to cruising boats. A good cruising boat still needs good upwind performance tho, and they normally travel with little heel - hence the vertical boards are ideal for performance but they ruin the interior space - which is also important for cruising . So the best compromise on a cruising boat would be whichever cant was less - inward or out, and keep the board running down the topsides so you don't have a trunk in the middle of the hull and maximise interior utility. Really big cats however - can have a trunk in the center and you still have enough room in the hull to fit full size accommodation spaces on both sides of it - this doesn't apply to smaller boats tho. For racing it can go either way depending on whether the boat is designed to float or fly. Some vertical lift may increase speed - such as the C boards used on the racing trimarans, however you loose some leeway due to the angle. The racing tris offset this loss by including the centreboard in addition to the C boards in the amas. If the race boat is a floater only - then inward cant is likely best so the board is vertical providing maximum lift upwind whilst the boat is heeled and flying a hull. This concept is proven as the fastest smallish catamaran in Australia right now is setup like this (40fter). Round the bouys racing is usually won on the upwind performance - less so on the downwind and reach legs. Assymetric boards is another consideration - again is depends on the intended usage. For racing maximum lift to drag ratio is paramount - hence better to use assymetric boards 1 at a time and size them accordingly. For cruising - most people cant be bothered rasing and lowering on every tack and the total performance not so important to most people. Hence they normally use symmetric boards both down at once. More area in the water but and not as good lift to drag ratio - set and forget when tacking upwind... Horses for courses steve - no simple answers I'm afraid

Hi Groper, thanks for the insight, pretty much my thoughts also. On cruising cats you either have low aspect keels or either kickup centerboards or if it is more performance oriented daggerboards which, as you say, usually follow the outside angle of the hull topside because of how they fit with accomodations rather than any sailing related issue. However with net and tube type racing cats you get to choose whether they angle in or out at the design stage based on performance alone. To my way of thinking angling out such as most of Tennant and Grainger cats have them place for two reasons, easier to raise and lower so they can be cantilevered down into the trunk so they can be considerably shorter for the same draft so , lighter. Daggers are rarely very light so any savings in length is worthwhile plus you don't need any additional structures for raising them which is also a weight saving. The other more obvious advantage is of course the board is close to vertical when the windward hull is just out of the water. I would guess that with them angled inward ( underwater) you would need to deploy more board for leeway resistance (more drag). I have however seen cats switch from outboard angled boards to inward angled which leads to my confusion, I totally understand the desire for hydrodynamic lift and on tris its a no brainer as, as you say, they have a daggerboard in the main hull for upwind work and also the boards in the amas can, and are angled at a much greater angle than can be achieved on a cat so provide real lift, even with simple straight boards. I just question how much lift a board in a cat angled at maybe 5-10 degrees give vs the disadvantages. As far as asymetrical boards go they only make sense on actively sailed cats, ie racing cats and I think would be necessary on cats with inward angled boards. In the US we have Gemini cruising cats with asymetric centerboards that require you to go down into one hull and crank a winch handle to raise one and then cross over to the other lower the other. Not going to happen imho on a cruising boat. Steve.

Martin Fischer-Catamaran Daggerboard position: foiler and convertible--

Floating island - Trimaran or Catamaran?

Extra Marstrom 32 and f40 catamaran hulls

Light weight big open deck catamaran

Limits to the beam of a catamaran ratio ?

Where did Uffa Fox sail Shearwater Catamaran 990?

Catamaran Strength Analysis

Gemini Catamaran, new builds?

Designs of catamarans not in metric but SAE

Rudder lift on Boardless Catamarans?

No, create an account now.
Yes, my password is:
Forgot your password?

Daggerboards vs Centerboards

Collin Marshall - Kinetic Catamarans Commissioning Skipper and Sailing Systems Engineer, breaks down Centerboards vs Daggerboards. Kinetic has an option for either on the KC62 and KC54, owner preference.

What are the fundamental differences between centerboards and daggerboards?

Centerboards or “swing boards” rely on a pivot point at the top of the board allowing it to swing 90 degrees vertically and retract horizontally in a wet cavity built into the bilges in each hull, while daggerboards penetrate only vertically through bearing boxes in each hull. These deployment differences can dictate the shape of the boards thus changing the performance of the catamaran.

Centerboards Pros & Cons

Pros: There are plenty of reasons for choosing centerboards for you KC54 or KC62. One of the top pros is the safety factor for sure. Here at Kinetic Catamarans, our centerboards are driven by push button line drivers governed by proximity sensors. We have integrated “fuses” or a weak spot in the line holding the board down which would break upon grounding or hitting a submerged object. The boards are buoyant and would float back up into the case with minimal damage to the leading edge. An inspection is recommended if this scenario plays out however with easy access to the line drivers and a quick replacement of the fuse we are off and sailing again.

Cons: Centerboards although very safe do take a small performance reduction. Having the lateral resistance retract into a box built into the hull not only governs the shape of the board but also leaves an open cavity for water turbulence to occur, which can disturb the water flow down along the hull and over the rudder. Another performance hit occurs when you want only a percentage of your board down, the lateral resistance is reduced dramatically.

See illustration below for reference of the cavity outlined in red.

Daggerboards Pros & Cons

Pros: As a sailor when I hear the term “daggerboard” I think of performance. Daggerboards can vary in shape whether asymmetrical or even curved therefore increasing lift while sailing. Our daggerboards are also push-button line driven for easy handling, however, they retract into a much smaller bearing box oriented for vertical deployment thus reducing the disturbed water turbulence. If we struck the bottom or a submerged object with a daggerboard we could repair it by pulling the board out of the boat with a halyard.

Cons: The daggerboard does not have a safety fuse integrated into the line driver since they are vertically lifted. If a daggerboard struck an object it would endure the full impact force and transfer the load to the bearing box which would result in higher levels of damage to the board or even the boat. Daggerboards also require real estate in both port and starboard hulls penetrating into the cabins, therefore, reducing some hallway space or even cabin room.

See illustration below for reference of the reduced hallway space in both hulls:

Which is better for performance vs cruising?

If you are looking for maximum performance out of your KC then I would recommend daggerboards. However, these are 20+ knot catamarans with either setup so it really depends on the owner's goals and also the sailing destination. If I wanted to cruise the Bahamas which is notorious for shallow water then centerboards would be the safer choice, however, if I were to enter my catamaran in an ocean race then I would tend to lean more towards daggerboards.

Which one is better suited for shorthanded sailing?

I would not label either board option better for shorthanded sailing. We specifically design Kinetic Catamarans for shorthanded sailing with both board setups being push-button controlled.

Lastly, which is your preferred option and why?

I've had extensive experience with both foils and I must admit that the daggerboards do give the cat that extra performance gain. I've spent most of my career racing sailboats so I'm a bit biased towards performance. Most of us racers choose to sleep on wet sail bags in tight berths just to go a fraction faster, however for cruising I recommend centerboards mainly for the safety factor. Both options are incredibly high performance and easy handling for shorthanded sailing so it really is about the intent of the owner.

The Ultimate 54' Carbon Cruiser

Kinetic catamarans build update | 05.

IMAGES

Catamaran basics The daggerboards: understanding and adjusting them
HH60
Moonwave
Easton 42 aluminium daggerboard cruising catamaran For Sale
HH60
Catamaran basics The daggerboards: understanding and adjusting them

VIDEO

Daggerboards
Super Cool Video
Transit Toucan first sail May 2015
Dagger Katana
The Top 10 Performance Cruising Catamarans
C Cat 37 Catamaran 2023

COMMENTS

9 Best Cruising Catamarans With Daggerboards or Centerboards!
The best cruising catamarans with daggerboards or centerboards provide great cruising capability, comfortable living, ease of handling, and strong construction. Based on different styles, designs, sizes, and prices, some of the best catamarans are Outremer 45, Catana 50, and Balance 526. If catamaran cruising is a passion you have been longing ...
Catamaran basics The daggerboards: understanding and adjusting them
Having a catamaran with daggerboards means enjoying better pointing ability than an equivalent model equipped with fixed stub keels, which are inevitably shorter. It means that you can also optimize drag, speed and even safety. Partially integrated, with foils...an inventory of the daggerboards on our boats and how to use these appendages.
What Are Daggerboards on a Catamaran? (An In-Depth Look)
Short Answer. Daggerboards are vertical boards on a catamaran that can be raised and lowered to provide lateral resistance and stability to the boat. When the daggerboards are lowered, they provide more stability and can help the catamaran sail closer to the wind. When they are raised, the catamaran has less resistance and can move faster.
Catamaran Daggerboards and Keels
Woods 36 Vardo with Keels. So there's the two factors: one is the the sea kindliness of having daggerboards, and the other is the better performance. A daggerboarded boat is always better, but it does have some disadvantages. The main one is that if you want to beach your boat or dry it out.
HH50
HH50-SC (Sports Cruising) The HH50-SC integrates the very latest in race boat technology but remains equally comfortable and family friendly. This is a "no-compromise boat" with full carbon construction, dual helms, C-shaped carbon daggerboards and stunning performance for its size. Click here to view HH50 brochure.
HH60
The HH60 was born from a desire to take the already-stellar performance up another notch. A taller mast, longer longeron and deeper daggerboards ensure that the HH60 will outperform everything in its class. Every HH Catamaran is built using the very finest, strongest and lightest materials available.
How We Do: Daggerboards
Every single HH Catamaran daggerboard goes into our monster testing jig and we apply the full force of the known working load to fly a hull with two reefs and the two times "dynamic load factor". So, an HH66 board gets tested to a staggering 17,000kg, which is really scary. Even with our new HH50, the boards are tested all the way to 10 tons.
Sailing Catamarans
Currently I own two catamarans, one with daggerboards and one with keels. Over the last 30 years I have owned five cruising catamarans with keels, nine with daggerboards and one with one centerboard. Furthermore, I am one of the few designers who has fitted LAR keels and boards to the same hull (on Strider, Sagitta and Banshee) and then sailed ...
CATAMARAN DESIGN: Daggerboards on Catamarans
Daggerboards. Do you really need them on a cruising cat? Or is just for all the racers? In the second of our Technical Tuesday series on Catamaran design we ...
Daggerboards: how to adjust them on your catamaran
In very light winds, the standard practice is to lift the windward daggerboard all the way and only trim the leeward board. When both daggerboards are down, (for simplicity) there is now double the 'underwater sail' area. This would likely imbalance how much power there is from the light winds on the sail above the water, and literally ...
Daggerboards
Marking the daggerboards at deck level will help indicate a "control" depth and assist in judging when they will be extending deeper than the rudders and thus aid in protecing them in case of a collision. For a more detailed description of daggerboards and their use, please refer to the "Appendages" chapter. Continue reading here: Tacking.
HH44 Performance Sailing Catamaran Review
This is HH's first hybrid electric-powered catamaran although you can also opt for standard diesel power with shaft drives. There are 2 versions, like much of the HH range. ... model: HH44-SC and the Ocean Cruising model: HH44-OC. The SC version is a "no-compromise-boat" with C-shaped carbon daggerboards, a carbon rig, a painted hull ...
Which catamarans have daggerboards? ⋆ SailHow
After researching catamarans we have made a list of catamarans with daggerboards. Performance means a great deal for us, so we are looking at the pros and cons of daggerboards, and would like to share our knowledge in this article. If you know of any boats that should be included in this article, please let […]
Why Daggerboards Make Sense over a Fixed Keel
Your sails, keels, daggerboards and rudders when moving forward into the wind create high pressure of the windward side, and low pressure on the leeward side, and the boat is pulled forward, into the wind. Because the foil directs the boat around the curve of the foil, the boat is lifted forward, and to windward. This is also why airplanes fly.
HH60
A high-performance catamaran with deep daggerboards and an extra-wide cockpit. This latest HH project from Morrelli & Melvin retains the same silhouette of the other models in the range while affirming its ambitions in terms of performance: displacement remains modest and is associated with a powerful rig - this culminates at 94½ feet (28.78 ...
Catamarans with Daggerboards: Enhancing Stability and Performance
Short answer catamarans with daggerboards: Catamarans with daggerboards are multihull sailboats consisting of two parallel hulls and vertical foils called daggerboards that can be raised or lowered. Daggerboards improve stability, reduce leeway, and increase upwind performance by minimizing side slipping. These high-performance catamarans are commonly used in racing, offshore cruising, and ...
Daggerboards or Mini Keels for Catamarans?
The difference in windward performance between fixed keels and daggerboards on cruising cats varies depending on the conditions. In very light airs the daggerboards have a clear advantage, providing reduced wetted area and greater lift at angles of attack where a large percentage of the fixed keel's area is likely to be suffering from flow ...
Multihull Keels and Daggerboards
The other type of multihull is the catamaran with articulating daggerboards or centerboards. Centerboard and daggerboard multihulls both share the same basic concept, except their deployment and storage relies on different principles. The daggerboard lives in a scabbard, or daggerboard trunk. It moves up and down, vs. a pivoting centerboard ...
Performance Study of Daggerboards Versus Keels
By: Phillip Berman, published with editor's permission from Boating NZ and Blue Water Sailing In my forty-five year career in the catamaran industry there's been a relentless debate on the virtues and vices of daggerboards versus fixed keels. This debate has, however, mostly been waged without "hard numbers" from which to compare performance differences. As we […]
Daggerboard
Generally, daggerboards are used on smaller rigs such as 10 to 40 feet for racing but there is a large number of custom and semi-custom catamaran builders who offer daggerboards as an option. Daggerboard rigs may be faster than fixed keels because fixed keels have so much hydrodynamic drag by the shape.
Heavy Weather Strategies When Sailing a Catamaran
High-performance cruising cats: High-performance cruising catamarans typically have efficient daggerboards or centerboards, deeper rudders, less windage and less displacement. They can go to windward at a 45-50 degree TWA in nearly all conditions. A performance cruising catamaran can typically outsail even the best keelboats to windward.
Catamaran daggerboard design and use
Catamaran daggerboard design and use. Discussion in 'Multihulls' started by Steve W, Aug 2, 2017. Joined: Jul 2004 Posts: 1,871 ... On cruising cats you either have low aspect keels or either kickup centerboards or if it is more performance oriented daggerboards which, as you say, usually follow the outside angle of the hull topside because of ...
Daggerboards vs Centerboards
Collin Marshall - Kinetic Catamarans Commissioning Skipper and Sailing Systems, breaks down Centerboards vs Daggerboards. Kinetic has an option for either on the KC62 and KC54, owner preference.

9 Best Cruising Catamarans With Daggerboards or Centerboards!

Dagger/Centerboards and Their Role in Catamaran Sailing

Should You Choose a Catamaran With Daggerboards?

The Dolphin Ocema 42

The Outremer 45

The Atlantic 42

The Gunboat 62

Gemini 105Mc

The Catana 50

McConaghy MC50

Atlantic 47 Mastfoil

The Balance 526

Final Thoughts

Leave a Reply Cancel reply

Recent Posts

What Are Daggerboards on a Catamaran? (An In-Depth Look)

Short Answer

What Are Daggerboards?

How Daggerboards Work

The Benefits of Daggerboards

Types of Daggerboards

Daggerboard Maintenance

Daggerboard Upgrades

Daggerboard Performance

Final Thoughts

Recent Posts

Catamaran Daggerboards and Keels – Woods Interview # 9

Richard, can you start off with what dagger boards and keels do for a boat?

And there’s definitely a learning curve to knowing how to use the daggerboard effectively, and have that experience. So are they less of a beginner kind of attribute on a catamaran and more of a somebody who’s been sailing for a while?

I guess it was a sacrificial item!

Right. That’s what I’m thinking. Rather than hitting the reef with your boat, you hit it with something sacrificial. They can be expensive to replace, but…

I guess that’s why multihulls became so much more popular in the UK before other places.

Well that’s cool. So thank you Richard, that was fascinating on daggerboards and keels.

By Diane Selkirk

Leave a Reply Cancel reply

How We Do: Daggerboards

Dealing With Covid-19

Keels or Daggerboards, the pros and cons

Daggerboards: how to adjust them on your catamaran

Catamaran daggerboards: how should they be adjusted for optimum sailing?

Which catamaran daggerboard for which sailing conditions?

Safety at sea: adjusting daggerboards to avoid risks

Continue navigation

Setting off on a catamaran with the best sailing weather

Catamaran VS Monohull: what should you choose to sail around the world?

The Importance of Defining Success

Daggerboards

Recommended Programs

Related Posts

Description

Light Construction

Living Space

Technical Specification

Related Catamarans

Atlantic 57

Seawind 1600

Privacy Overview

Which catamarans have daggerboards?

Why choose a catamaran with daggerboards?

Catamarans with daggerboards

Benefits of having daggerboards on a catamaran

Disadvantages of daggerboards

Why choose daggerboards over fixed keel?

Related Posts

Should you own or charter a boat?

How Anchors Work and All You Need to Know about Anchoring

Why catamarans have trampolines

Tips for new sailors in 2022

Current issue

Choose the option that suits you best!

Most-read articles in the same category

Archipelago 80

Sanctuary Cove International Boat Show

Lagoon Escapade

Astrea 42 Smart Electric

Subscribe now

Video of the month

The Multihull of the Year

Classified ads

2018 Fountaine Pajot MY 44