types of sailing yacht

Types of Sailboats: Essential Guide for Every Sailor

Sailboats have been an essential part of human history, contributing to exploration, trade, and leisure. With a myriad of designs and sizes, these versatile vessels cater to various purposes and preferences. The defining characteristics of sailboats come from their rigging, sails, and hull design.

The basics of sailboat design play a significant role in the classification and function of these vessels. Hull shapes, keel types, and construction materials contribute to the speed, stability, and maneuverability of sailboats. Additionally, rigging and sails come in various shapes and sizes, which influence sailing performance and handling.

Key Takeaways

• Sailboats are classified by hull design, rigging, and sails that serve specific purposes.
• Designs and materials have a direct impact on the performance and handling of sailboats.
• A wide range of sailboat types exists, which cater to different needs and preferences.

Basics of Sailboat Design

Sailboats come in various shapes and sizes, designed for different purposes and sailing conditions. One can classify sailboats based on hull types, keel types, and mast configurations. This section will briefly discuss these basic components of sailboat design.

There are mainly two types of hulls: monohull and multihull.

• Monohull : This is the traditional and most common type of sailboat hull. It consists of a single hull, providing stability through the use of a keel or centerboard. Monohulls come in various shapes and sizes, suitable for various sailing conditions.
• Catamaran : Catamarans have two parallel hulls of equal size, offering increased stability and speed compared to monohulls. They are commonly used for cruising and racing.
• Trimaran : Trimarans have three hulls, with a larger central hull and two smaller outrigger hulls. This design offers even more stability and speed than catamarans.

The keel is an essential component in sailboat design, helping with stability and performance. There are various keel types, including:

• Full keel : This traditional design features a long and wide keel that extends along the boat's bottom. It offers good tracking and stability but sacrifices speed and maneuverability.
• Fin keel : Fin keels are shorter and deeper than full keels, providing a better combination of stability and maneuverability. These are common in modern monohull sailboats.
• Bulb keel : A bulb keel features a fin keel with a heavy bulb at the bottom, which concentrates the boat's weight, increasing stability and performance in rough conditions.
• Swing keel or centerboard : Swing keels and centerboards can be raised or lowered, allowing the boat to adapt to different water depths and sailing conditions. They are common in smaller boats and racing sailboats.

Mast Configuration

The mast configuration affects the sail plan and overall performance of a sailboat. Some common mast configurations include:

• Sloop : This is the most popular mast configuration and features a single mast with a mainsail and a headsail. The simple design makes it easy to handle and suitable for various sailing conditions.
• Cutter : Similar to the sloop, the cutter also has a single mast but carries two headsails, providing more sail area and better performance in heavy weather.
• Ketch : A ketch configuration has two masts: a taller main mast and a shorter mizzen mast. This design offers more flexibility in sail combinations and better balance in different sailing conditions.
• Yawl : Similar to a ketch, a yawl also features two masts but the mizzen is located further aft and is smaller. This design provides better balance and control, particularly in downwind sailing scenarios.

In conclusion, the basics of sailboat design involve selecting the appropriate hull type, keel type, and mast configuration for the desired sailing performance and conditions. Understanding these concepts can help sailors make informed decisions when choosing a sailboat or planning their sailing adventures.

Rigging and Sails

When it comes to sailboats, the rigging and sails play a crucial role in the boat's overall performance and capabilities. This section will briefly cover popular rig types and sail types seen on different sailboats.

There are several types of rigs commonly found on sailboats:

• Sloop : Sloops are the most common type of rig found on modern sailboats. They have a single mast with a mainsail and a single headsail, typically a genoa or jib.
• Ketch : Ketches have two masts, with the main mast taller than the mizzen mast situated aft. They carry a mainsail on the main mast and a mizzen sail on the mizzen mast. Ketches benefit from easier handling and reduced sail area under strong winds.
• Yawl : Similar to ketches, yawls have two masts, but the mizzen mast is smaller and sits further aft, behind the rudder post. Yawls are often chosen for their graceful appearance and improved balance.
• Schooner : Schooners have two or more masts, with the aft mast(s) typically taller than the forward mast(s). Schooners can handle more sails, offering increased sail area for better performance, especially downwind.
• Catboat : Catboats are single-masted sailboats with a single, large mainsail and no headsails. They have a wide beam, which provides stability and ample space for passengers.
• Cutter : Cutters are similar to sloops but carry two headsails, usually a jib and staysail. Cutters may have multiple headsails for increased versatility in various wind conditions.

In addition to the types of rigs, there are also several types of sails used on sailboats, including:

• Mainsail : The primary sail attached to the back of the main mast. It is typically raised on a track or luff groove and managed by a combination of halyard, sheet, and boom vang.
• Genoa : A large triangular sail that overlaps the mainsail, typically used in light winds to provide additional surface area for better performance.
• Jib : A smaller, non-overlapping triangular sail attached to the forestay. Jibs are easier to manage than genoas and are used in a variety of wind conditions.
• Spinnaker : A large, lightweight sail used primarily for downwind sailing . Spinnakers are often brightly colored and shaped like a parachute to catch wind efficiently.
• Staysail : A smaller sail typically used in cutter rigs, positioned between the main mast and the forestay. Staysails provide additional sail area and versatility in varied wind conditions.

Understanding the relationship between sail and rigging can help sailors optimize the performance of their sailboats. With various options for rig types and sail types, each sailboat can be configured to meet the unique needs of its skipper and crew.

Classes and Types of Sailboats

Monohulls are the most common type of sailboats, consisting of a single hull that provides stability and balance. They come in various sizes and designs, depending on their intended use. Some popular monohull sailboats include the Optimist , Finn, and Sunfish, which are frequently used for racing and recreational sailing. Monohulls tend to have a deeper draft, requiring more water depth than their multi-hull counterparts.

Multihulls, also known as multi-hull sailboats, are a more modern innovation in sailing. They feature two or more hulls connected by a frame or bridgedeck. This design offers increased stability and speed over monohulls. Some common types of multihulls are catamarans (with two hulls) and trimarans (with three hulls). Due to their wider beam and shallower draft, multihulls are particularly suitable for cruising in shallow waters and provide more living space on board.

One-Design Sailboats

One-Design sailboats are a specific class of racing sailboats in which all boats are built to the same design specifications, ensuring that the competition focuses on the skill of the sailor rather than the design of the boat. These boats must adhere to strict rules and standards, with minimal variations allowed in terms of hull shape, sail area, and rigging. Some popular one-design sailboats include the Enterprise and the aforementioned Optimist and Finn sailboats.

Dinghies and Skiffs

Dinghies and skiffs are small, lightweight sailboats that are often used for sailing classes, short-distance racing, or as tenders to larger boats. Dinghies usually have a single mast with a mainsail and sometimes a small jib. Some popular types of sailing dinghies include the Optimist, which is specifically designed for children, and the versatile Sunfish sailboat. Skiffs, on the other hand, are high-performance sailboats primarily used for racing. They have a larger sail area relative to their size and typically include features such as trapezes and planing hulls, which allow for faster speeds and greater maneuverability.

In conclusion, there are various classes and types of sailboats, each with its own unique features and characteristics. From the simplicity of monohulls to the stability and speed of multihulls, and from the fair competition of one-design sailboats to the excitement of dinghies and skiffs, there is a sailboat to satisfy every sailor's preferences.

Sailboat Size and Use

When exploring the world of sailboats, it's important to understand their different sizes and purposes. Sailboats can be categorized into three main types, each with unique characteristics and uses: Day Sailers , Racing Sailboats, and Cruising Sailboats .

Day Sailers

Day Sailers are small sailboats typically ranging from 10 to 24 feet in length. These boats are perfect for short sailing trips and are easy to maneuver for beginners. They have limited accommodations on board, providing just enough seats for a small group of people. Some popular day sailer models include the Laser, Sunfish, and Flying Scot. Lightweight and agile, Day Sailers are often used for:

• Recreation: casual sailing or exploring nearby waters with family and friends
• Training: beginner sailing lessons or practicing sailing techniques
• Competition: local club races or interclub regattas

Racing Sailboats

Racing Sailboats are designed to provide maximum speed, maneuverability, and efficiency on the water. Sizes may vary greatly, from small dinghies to large yachts. Key features of racing sailboats include a sleek hull shape, high-performance sails, and minimalistic interiors to reduce weight.

Career racers and sailing enthusiasts alike participate in various types of racing events , such as:

• One-design racing: all boats have identical specifications, emphasizing crew skill
• Handicap racing: boats of different sizes and designs compete with time adjustments
• Offshore racing: long-distance racing from one point to another, often around islands or across oceans

Cruising Sailboats

Cruising Sailboats are designed for longer journeys and extended stays on the water. They typically range from 25 to 70 feet in length and provide comfortable accommodations such as sleeping cabins, a galley, and storage spaces for supplies and equipment. Sailing cruisers prioritize stability, comfort, and durability for their voyage.

Here are some common types of cruising sailboats:

• Cruiser-racers: These boats combine the speed of a racing sailboat with the comfort and amenities of a cruising sailboat. They are ideal for families or sailors who enjoy participating in racing events while still having the option for leisurely cruises.
• Bluewater cruisers: Designed for handling the world's most demanding ocean conditions, bluewater cruisers are built with a focus on sturdy, self-reliant sailboats that can withstand long-distance voyages and challenging weather conditions.
• Multihulls: Catamarans and trimarans are gaining popularity in the cruising world for their typically more spacious interiors and level sailing characteristics. With two or three hulls, multihulls offer high levels of stability and speed for a comfortable cruising experience.

Understanding the differences between various sailboat types will help potential sailors select the perfect vessel for their sailing goals, skills, and preferences. Day Sailers, Racing Sailboats, and Cruising Sailboats each have their unique features, catering to distinct uses and sailing experiences.

Advanced Sailboat Features

Sailboats have evolved over time, and many advanced features have been developed to enhance performance and safety. In this section, we will discuss some of the key advanced features in modern sailboats, focusing on performance enhancements and safety/navigation.

Performance Enhancements

One critical component that impacts a sailboat's performance is the type of keel it has, which affects stability, resistance, and maneuverability . There are several kinds of keels such as fin keel , wing keel , and bulb keel . Fin keels offer low drag and high efficiency, making them suitable for racing sailboats. On the other hand, wing keels provide better stability at low speeds, while bulb keels provide a lower center of gravity to enhance overall stability and comfort during long voyages.

Another feature that contributes to a sailboat's performance is its sails and rigging. The jib is a triangular sail at the front of the boat, which helps improve its upwind performance. More advanced sailboats use a combination of shrouds , which are the supporting cables running along the sides of the boat, and stays , the cables that help hold the mast in place, to create a stable and efficient rigging system.

A sailboat's performance can also be influenced by the presence of a centerboard or daggerboard , which can be adjusted to optimize stability, maneuverability, and speed. When racing or navigating in shallow waters, retractable centerboards and daggerboards are particularly useful as they provide better performance and versatility.

Safety and Navigation

Safety and navigation onboard a sailboat relies on a combination of advanced gear and equipment. A modern sailboat is usually equipped with:

• GPS and chartplotters to assist with navigation and planning routes
• VHF radios for communication with other vessels and authorities
• Radar to detect obstacles, weather systems, and other vessels
• AIS (Automatic Identification System) which helps monitor nearby vessel traffic

The design of a sailboat's hull, rigging, sails, and hardware also contribute to its safety. The boom , the horizontal pole that extends the sail, should be properly secured and designed to avoid accidents while sailing. The keel , whether it's a fin, wing, or bulb keel, plays a vital role in the overall stability and safety of the sailboat. The choice of keel should be based on the intended use of the sailboat and the prevailing sailing conditions.

In summary, advanced sailboat features significantly improve the performance, safety, and navigation capabilities of modern sailboats. Innovations in keel design, rigging systems, and onboard navigational equipment have undoubtedly contributed to the overall enjoyment and safety of sailing.

Sailboat Ownership

Buying Considerations

When considering buying a sailboat , it is important to understand the different types of sailboats available and the purpose each serves. Sailboats can be broadly categorized into three types:

• Racing sailboats: Designed for speed and performance, with minimalistic interiors and advanced sail systems.
• Cruising sailboats: Built for comfort and longer trips, featuring more spacious interiors and amenities.
• Daysailers: Smaller, easy-to-handle boats that are often used for short trips and recreational sailing.

Prospective boat owners should consider factors such as boat size, type, budget, and intended use (solo vs. family sailing, charter operations, etc.). It's also essential to evaluate the availability of necessary gear and the level of experience required to handle the chosen sailboat.

Maintenance and Upkeep

Sailboat ownership involves maintenance and upkeep to ensure the boat remains functional, safe, and holds its value. Some common maintenance tasks include:

• Hull cleaning and inspection: Regularly inspect the hull for damages and clean off any growth to maintain performance and fuel efficiency.
• Antifouling paint: Apply antifouling paint to prevent marine organisms from attaching to the hull, which can negatively impact the boat's performance.
• Engine maintenance: Check and replace engine oil, inspect cooling and fuel systems, and clean or replace air filters.

In addition to regular maintenance, sailboat owners should also be prepared to replace or repair critical systems and components, such as:

• Sails: Monitor the condition of your sails and replace them as needed to maintain performance and safety.
• Rigging: Regularly inspect and maintain the standing and running rigging, and replace worn or compromised parts.
• Electronics and instruments: Ensure navigation systems, radios, and other electronic equipment are functioning properly.

Taking proper care of a sailboat can be time-consuming, and some owners may choose to charter their boats when not in use as a way to offset ownership costs. Others may opt for hiring professionals to manage routine maintenance, particularly when sailing solo or with limited sailing experience.

Historical and Special Sailboats

Tall ships and gaffers.

Tall Ships are large, traditionally rigged sailing vessels with multiple masts, typically square-rigged on at least one of their masts. Some examples of these ships include the clipper, brig, and square-rigged vessels. The clipper is a fast sailing ship known for its sleek hull and large sail area, while the brig features two square-rigged masts. Square-rigged ships were known for their impressive sail area and could cover large distances quickly.

Gaffers are a subset of historical sailing vessels with a gaff mainsail as their primary sail type. This gaff-rig is characterized by a spar (pole) that extends the top edge of the mainsail, giving it a quadrilateral shape to optimize wind coverage. Gaff mainsails were commonly used in England and influenced the development of other sailing vessels.

Classic and Antique Sailboats

Classic and antique sailboats refer to older, traditionally designed sailing vessels that have been preserved or restored. They often feature wooden construction and showcase a variety of rigging types, including gaff rigs and square rigs. These historical sailboats have unique designs, materials, and techniques that have since evolved or become rare.

Here are some examples of antique and classic sailboats:

• Sloop : A single-masted sailboat with a Bermuda rig and foresail
• Cutter : A single-masted vessel with a similar rig to the sloop, but with additional headsails for increased maneuverability
• Ketch : A two-masted sailboat with a smaller mizzen mast aft of the main mast

In summary, historical and special sailboats encompass a wide range of vessel types, from large, multi-masted tall ships to smaller, single-masted gaffers and classic sailboats. These vessels reflect the rich maritime history and the evolution of sailing techniques and designs over time.

Sailboat Culture and Lifestyle

Sailboat culture and lifestyle encompass a variety of aspects including racing events, leisurely cruising, and exploring new destinations. The main types of sailboats include racing yachts, cruising sailboats, and motorsailers, each offering a unique experience for sailors.

Regattas and Racing Circuits

A popular aspect of sailboat culture involves participating in regattas and racing circuits . These events create a competitive atmosphere and develop camaraderie among sailors. Racing sailboats are specifically designed for speed and agility , and sailors often team up to compete in prestigious races such as the Rolex Sydney Hobart Yacht Race or the America's Cup. Yacht clubs play an essential role in cultivating this competitive sailing environment.

Sailboat Charter and Tourism

Another facet of sailing culture is the sailboat charter and tourism industry, which allows people to experience the cruising lifestyle without owning a sailboat. Charters are offered for various types of sailboats, from family-sized cruising vessels to luxurious superyachts . Yacht sailing provides tourists with a unique travel experience, as they can explore diverse destinations, immerse themselves in local cultures, or simply relax on the open water.

Cruising sailboats are designed to provide comfortable living spaces and amenities, making them perfect for longer journeys or exploring remote destinations. Motorsailers, on the other hand, are equipped with both sails and engines, offering versatility and convenience for sailors.

Some popular sailing destinations include the Caribbean, Mediterranean Sea, and the South Pacific. These regions offer beautiful scenery, rich cultural experiences, and ideal sailing conditions.

The sailboat culture and lifestyle attract individuals who enjoy adventure, exploration, and camaraderie. From competitive racing events to leisurely cruising vacations, sailing offers diverse experiences that cater to a wide range of interests.

Frequently Asked Questions

What are the distinguishing features of different sailboat classes?

There are various sailboat classes, each with its own distinguishing features. Monohulls, for example, are the most common type of sailboat and have a single hull. Multihulls, such as catamarans and trimarans, have two or three hulls, respectively. These differences in hull design often affect the boat's stability, speed, and maneuverability.

Which sailboat types are best for novice sailors?

Novice sailors often benefit from starting with smaller, more manageable boats. Sailing dinghies and daysailers are popular choices due to their simple rigging and ease of handling. These boats typically have a single mast and a limited number of sails, making them ideal for beginners to learn sailing basics.

What are common types of small sailboats ideal for day sailing?

For day sailing, small sailboats such as sailing dinghies, day sailers, and pocket cruisers are ideal options. These boats usually range between 12 and 25 feet in length and offer simplicity, ease of handling, and portability. Examples of common day sailing boats include the Sunfish, Laser, and O'Day Mariner.

How do the purposes of various sailboat types vary?

Sailboats serve different purposes based on their design, size, and features. Daysailers and dinghies are ideal for short trips, sailing lessons, and casual outings. Racing sailboats, with their lighter weight and streamlined design, are built for speed and competition. Cruising sailboats, on the other hand, are designed for longer voyages and often include living quarters and additional amenities for comfortable onboard living.

What is considered the most popular class of sailboat for recreational use?

The most popular class of sailboat for recreational use often varies depending on individual preferences and local conditions. However, monohulls are commonly preferred due to their widespread availability, versatility, and affordability. Within the monohull class, boats like the Sunfish, Laser, and Catalina 22 are popular choices for their ease of use and adaptability to various sailing conditions.

Could you describe a sailing dinghy designed for two people?

A two-person sailing dinghy typically has a simple rig with a single mast and one or more sails, making it easy to handle for both experienced and novice sailors. The RS Venture , for example, is a popular choice for two-person sailing. It features a spacious cockpit, durable construction, and simplicity in its rigging and control systems. These characteristics make it an excellent option for recreational sailing, training, and even racing.

Related Articles

How to Ship a Boat: Time, Cost, and Methods Explained

Best Jet Ski 2024: Top Models and Buying Guide for Thrill Seekers

Deck Boat Essentials: A Comprehensive Guide for Enthusiasts

How Do You Know When You Are Operating Your Vessel at a Safe Speed? Essential Tips and Guidelines

2023 Best Standup Paddleboards: Top Picks for Every Paddler

Marina 27 Lake Lotawana Complete Guide: Essential Tips and Information

John Pennekamp State Park: A Gateway to Florida's Underwater Wilderness

How Much is Freedom Boat Club: An Insider's Cost Breakdown

Types of Sailing Yachts: Pros, Cons and Comparison

There are many different types of sailing yachts, each with their own unique features and characteristics. Here, we will discuss some of the most popular types of sailing yachts and the features that set them apart.

Table of Contents

Cruiser/Racer

Cruiser/Racer sailing yachts are designed for both cruising and racing, making them versatile and popular among sailors of all skill levels. These yachts typically have a comfortable interior for longer trips and a more performance-oriented hull design for racing.

One of the key features of cruiser/racer yachts is their balance between comfort and performance. While they have the amenities and space needed for cruising, such as a comfortable interior, a large cockpit, and a variety of amenities for extended voyages, they also have a more performance-oriented hull design for racing. This allows sailors to enjoy the best of both worlds, whether they want to go for a leisurely cruise or participate in a racing event.

The hull design of cruiser/racer yachts is typically more hydrodynamic than traditional cruising yachts, which allows for better speed and manoeuvrability. Additionally, these yachts often have a more lightweight construction to help reduce drag and increase performance.

Another feature that sets cruiser/racer yachts apart is their modern sail plan. They are often equipped with larger and more powerful sails than traditional cruising yachts, which allows them to reach higher speeds and perform better in racing conditions.

Cruiser/Racer sailing yachts are popular among sailors who want to participate in racing events, but also want to take longer trips and enjoy the comfort and amenities of a cruising yacht. They are also popular among sailors who want to learn to race, but don’t want to sacrifice the comfort and space of a traditional cruising yacht.

Pros and Cons of Cruiser/Racer

Cruiser/Racer yachts are versatile sailing yachts that are designed for both cruising and racing, making them popular among sailors of all skill levels. However, like any type of yacht, they have their own set of pros and cons.

• Versatility: Cruiser/Racer yachts are designed for both cruising and racing, which makes them a great choice for sailors who want to do both. They have a comfortable interior for longer trips and a more performance-oriented hull design for racing, which allows sailors to enjoy the best of both worlds.
• Balance of comfort and performance: Cruiser/Racer yachts are designed to provide a balance of comfort and performance. They have the amenities and space needed for cruising, but also have a more performance-oriented hull design for racing, which allows them to perform well in racing conditions.
• Good for learning to race: Cruiser/Racer yachts are a great choice for sailors who want to learn to race, but don’t want to sacrifice the comfort and space of a traditional cruising yacht.
• Expensive: Cruiser/Racer yachts can be more expensive than other types of yachts, especially if they are designed and built to high specifications.
• Maintenance: Cruiser/Racer yachts require more maintenance than other types of yachts, as they have more complex systems and features.
• Not as comfortable as a cruiser: Cruiser/Racer yachts are not as comfortable as traditional cruising yachts, as they have more performance

Overall, Cruiser/Racer sailing yachts are a great choice for sailors looking for a versatile yacht that can handle both cruising and racing. With their comfortable interior, performance-oriented hull design, and modern sail plan, these yachts offer the perfect balance between comfort and performance.

Daysailer sailing yachts, as the name suggests, are designed for short trips and day sails. They are typically smaller and more compact than other types of yachts, and are often used for training or recreational sailing.

One of the key features of daysailers is their small size and simplicity. They typically have a smaller cockpit, a simple sailplan, and minimal amenities, which makes them easy to handle and maneuver for sailors of all skill levels. This makes them ideal for training, learning to sail, or for short trips where you don’t need to bring much gear or supplies.

Daysailers also typically have a more lightweight construction than other types of sailing yachts, which allows them to be more responsive and maneuverable on the water. This makes them ideal for racing and other competitive sailing events.

Another feature that sets daysailers apart is their affordability. They are often less expensive than other types of yachts, which makes them an accessible option for sailors who are just starting out or who are on a budget.

Daysailers are also popular among sailors who prefer the simplicity of day sailing and are not interested in overnight trips or longer cruises. They are also a great choice for sailors who want to enjoy the experience of sailing without the added responsibilities that come with owning a larger yacht.

Pros and Cons of Daysailers

Daysailer yachts are designed for short trips and day sails, and are typically smaller and more compact than other types of yachts. They are often used for training or recreational sailing. However, like any type of yacht, they have their own set of pros and cons.

• Affordable: Daysailers are often less expensive than other types of yachts, which makes them an accessible option for sailors who are just starting out or who are on a budget.
• Easy to handle: Daysailers typically have a small cockpit, a simple sail plan, and minimal amenities, which makes them easy to handle and maneuver for sailors of all skill levels. This makes them ideal for training, learning to sail, or for short trips where you don’t need to bring much gear or supplies.
• Lightweight construction: Daysailers have a more lightweight construction than other types of sailing yachts, which allows them to be more responsive and maneuverable on the water. This makes them ideal for racing and other competitive sailing events.
• Limited amenities: Daysailers have limited amenities, which means they are not designed for overnight stays or longer cruises.
• Limited space: Daysailers typically have limited space, which makes them less comfortable than larger yachts.
• Not suitable for long-distance cruising: Daysailers are not suitable for long-distance cruising or live-aboard cruising as they are not equipped for it.

Overall, Daysailer yachts are a great choice for sailors looking for a small, easy-to-handle, and affordable yacht that is ideal for day sailing and short trips. However, they are not suitable for overnight trips or long-distance cruising, and have limited amenities and space.

Racing Yacht

Racing yachts are designed specifically for speed and performance. They are typically much smaller than cruising yachts, and are built to be as lightweight and hydrodynamic as possible. They are often used in competitive sailing events, such as regattas and races.

One of the key features of racing yachts is their lightweight construction. They are typically made of materials such as carbon fiber or high-tech composites, which are both lightweight and strong. This allows them to reach high speeds and perform well in racing conditions.

Another feature that sets racing yachts apart is their hydrodynamic hull design. These yachts are built with a sharp bow, a narrow beam and a long waterline, which helps them to cut through the water more efficiently and reach higher speeds. They also tend to have a deep keel, which provides them with more stability and helps them to perform better in strong winds and rough seas.

Racing yachts also often have a more modern sail plan, with larger and more powerful sails that allow them to reach higher speeds and perform better in racing conditions. They also often have a smaller interior to keep weight down, which can make them less comfortable for overnight stays.

Racing yachts are popular among sailors who want to participate in competitive sailing events and races. They are also popular among sailors who want to experience the thrill of sailing at high speeds and pushing the limits of performance. However, it’s important to keep in mind that racing yachts are not as comfortable for long cruises as other types of sailing yachts and they can be expensive to maintain.

Pros and Cons of Racing yachts

Racing yachts are designed specifically for speed and performance, and are often used in competitive sailing events such as regattas and races. However, like any type of yacht, they have their own set of pros and cons.

• Speed: Racing yachts are built with lightweight construction and a hydrodynamic hull design, which allows them to reach high speeds and perform well in racing conditions.
• Maneuverability : Racing yachts are designed to be highly maneuverable, which allows them to perform well in tight and technical racing conditions.
• Modern sail plan : Racing yachts are often equipped with larger and more powerful sails than traditional cruising yachts, which allows them to reach higher speeds and perform better in racing conditions.
• Cost : Racing yachts can be expensive to purchase and maintain, especially if they are designed and built to high specifications.
• Comfort : Racing yachts typically have a smaller interior than other yachts, which can make them less comfortable for overnight stays.
• Maintenance : Racing yachts require more maintenance than other types of yachts, as they have more complex systems and features, and they are often pushed to the limits of their performance.
• Not suitable for long-distance cruising : Racing yachts are not suitable for long-distance cruising or live-aboard cruising as they are not equipped for it.

Overall, Racing yachts are a great choice for sailors looking for a high-performance sailing vessel that can be used in competitive sailing events. With their lightweight construction, hydrodynamic hull design, and modern sail plan, racing yachts are designed to reach high speeds and perform well in racing conditions. However, they can be expensive to purchase and maintain, and may not be as comfortable as other types of yachts for overnight stays or long-distance cruising.

Cruising yachts, also known as cruisers, are designed for longer trips and are typically larger and more comfortable than other types of yachts. They are built for extended voyages, and often have a spacious interior, a large cockpit, and a variety of amenities to make life on board more comfortable.

One of the key features of cruising yachts is their spacious interior. They are designed to have multiple cabins, a large salon, and a well-appointed galley, which makes them ideal for longer trips and live-aboard cruising. They also usually have a lot of storage space, so you can bring all the gear and supplies you’ll need for an extended voyage.

Another feature that sets cruising yachts apart is their stability and seaworthiness. They are designed to handle rough seas and strong winds, which allows them to be more comfortable and safer for longer trips. They also typically have a more comfortable motion, which helps to reduce fatigue for those on board.

Cruising yachts also often have a variety of amenities, such as air conditioning, generators, and refrigeration, which make them more comfortable and convenient for longer trips. They also often have a larger cockpit, which provides more space for relaxing and entertaining.

Cruising yachts are popular among sailors who want to take longer trips, live aboard or even cross oceans. They are also popular among sailors who want to experience the comfort and convenience of a well-appointed yacht. However, it’s worth noting that cruising yachts are typically more expensive than other types of yachts and they require more maintenance.

Overall, cruising yachts are a great choice for sailors looking for a comfortable and seaworthy yacht that can handle longer trips and live-aboard cruising. With their spacious interior, stability, and variety of amenities, cruising yachts are designed to make life on board as comfortable and convenient as possible.

A catamaran is a type of sailing yacht that has two parallel hulls, rather than one. They are known for their stability and spaciousness, making them popular for longer trips, live-aboard cruising, and charter vacations.

One of the key features of catamarans is their stability. With two hulls, the boat has a lower center of gravity and a wider beam, which makes them less likely to tip over in rough seas. This makes them a comfortable and safe option for longer trips and live-aboard cruising.

Another feature that sets catamarans apart is their spaciousness. They typically have a larger interior than monohulls of the same length, which allows for more living and storage space. This makes them ideal for bigger groups of people or for longer trips. They also usually have a larger cockpit, which provides more space for relaxing and entertaining.

Catamarans also often have a more shallow draft than monohulls, which allows them to navigate shallow waters, and anchor in more secluded bays. This can open up new opportunities for cruising, especially in areas where monohulls can’t access.

Catamarans are popular among sailors who want to take longer trips, live aboard, or who are looking for more stability and spaciousness. They are also popular among sailors who want to experience the comfort and convenience of a well-appointed yacht. However, it’s worth noting that catamarans are typically more expensive than other types of yachts and they require more maintenance.

Pros and cons of Catamaran

Catamarans are a type of sailing yacht that have two parallel hulls, which makes them known for their stability and spaciousness. They are popular for longer trips, live-aboard cruising, and charter vacations. However, like any type of yacht, they have their own set of pros and cons.

• Stability: Catamarans have a lower center of gravity and a wider beam than monohulls which make them less likely to tip over in rough seas. This makes them a comfortable and safe option for longer trips and live-aboard cruising.
• Space: Catamarans typically have a larger interior than monohulls of the same length, which allows for more living and storage space. This makes them ideal for bigger groups of people or for longer trips.
• Shallow draft: Catamarans also often have a more shallow draft than monohulls, which allows them to navigate shallow waters and anchor in more secluded bays.
• Cost: Catamarans can be more expensive than other types of yachts, especially if they are designed and built to high specifications.
• Maintenance: Catamarans require more maintenance than other types of yachts, as they have more complex systems and features.
• Not suitable for racing: Catamarans are not typically used for racing as they are not as fast as monohulls.
• Can be affected by wind direction: Catamarans can be affected by the wind direction, as the wind can hit the hulls from the side and can cause them to heel over.

Overall, Catamarans are a great choice for sailors looking for a stable and spacious yacht that can handle longer trips and live-aboard cruising. With their stability, spaciousness, and shallow draft, Catamarans are designed to provide a comfortable and safe sailing experience. However, they can be expensive and require more maintenance, they are

A trimaran is a type of sailing yacht that has three hulls, two smaller amas (outrigger hulls) and a central main hull, rather than one. They are known for their speed and stability, and are often used for racing and long-distance cruising.

One of the key features of trimarans is their speed. The two smaller amas, which are located on the sides of the main hull, increase the waterline length and provide more surface area for the sails to push against. This allows them to reach higher speeds and perform better in racing conditions.

Another feature that sets trimarans apart is their stability. With three hulls, the boat has a lower center of gravity and a wider beam, which makes them less likely to tip over in rough seas. This makes them a comfortable and safe option for longer trips and live-aboard cruising.

Trimarans also often have a more shallow draft than monohulls, which allows them to navigate shallow waters, and anchor in more secluded bays. This can open up new opportunities for cruising, especially in areas where monohulls can’t access.

Trimarans are popular among sailors who want to participate in racing events, and also want to take longer trips and enjoy the comfort and amenities of a cruising yacht. They are also popular among sailors who want to experience the thrill of sailing at high speeds and pushing the limits of performance. However, it’s worth noting that trimarans can be expensive to maintain and they also need more space to store.

Overall, trimarans are a great choice for sailors looking for a high-performance sailing vessel that can handle both racing and long-distance cruising. With their speed, stability, and shallow draft, trimarans are designed to provide a comfortable and safe sailing experience while reaching high speeds and performing well in racing conditions.

Pros and Cons of Trimaran

Trimarans have several advantages over monohull boats:

• Faster: Trimarans have a wider beam (the width of the boat) than monohulls, which gives them more stability and allows them to sail faster.
• Shallower draft: Because the majority of the weight is on the main hull, trimarans have a shallower draft (the depth of the boat in the water) than monohulls, which allows them to navigate in shallower waters.
• More space: Trimarans have more space on deck and inside the boat, which makes them more comfortable for longer trips.
• Less comfortable in rough seas: Trimarans can be less comfortable in rough seas because the smaller hulls can be affected by the waves.
• More difficult to handle: Trimarans can be more difficult to handle than monohulls because they have a larger sail area and a wider beam.
• More expensive: Trimarans are generally more expensive to build and maintain than monohulls.

In summary, Trimarans are faster, more stable, and have more space, but they can be less comfortable in rough seas and are more difficult to handle. They are also more expensive than monohulls.

Classic Yacht

A classic yacht is a type of sailing yacht that is typically older and has been restored or maintained in its original condition. These yachts often have a timeless aesthetic and are often made of wood, they are often used for historical sailing events and regattas.

One of the key features of classic yachts is their unique and timeless design. They often have a traditional and elegant aesthetic, with classic lines, and a beautiful woodwork finish. These yachts are often one of a kind, as many of them were custom-built for their original owners.

Another feature that sets classic yachts apart is their history. Many of these yachts have a rich and interesting past, and have often been sailed by famous sailors, or have participated in significant sailing events. This can add to the charm and allure of owning and sailing a classic yacht.

Classic yachts also often have a more traditional sail plan and rigging, which can add to the sailing experience. Sailing a classic yacht can be a unique and rewarding experience, as it allows sailors to connect with the rich history of sailing and to appreciate the craftsmanship of these yachts.

Classic yachts are popular among sailors who appreciate the beauty and craftsmanship of traditional sailing yachts, and who want to experience the unique sailing experience that these yachts offer. They are also popular among sailors who want to participate in historical sailing events and regattas. However, it’s worth noting that classic yachts can be expensive to maintain, and require more expertise and care to keep in good condition.

Pros and Cons of Classic Yacht

Classic yachts are a type of sailing yacht that are typically older and have been restored or maintained in their original condition. They often have a timeless aesthetic and are often made of wood. They are often used for historical sailing events and regattas. However, like any type of yacht, they have their own set of pros and cons.

• Timeless design: Classic yachts often have a traditional and elegant aesthetic, with classic lines and beautiful woodwork finish. These yachts are often one of a kind, as many of them were custom-built for their original owners.
• History: Many classic yachts have a rich and interesting past, and have often been sailed by famous sailors or have participated in significant sailing events. This can add to the charm and allure of owning and sailing a classic yacht.
• Traditional sailing experience: Classic yachts often have a more traditional sail plan and rigging, which can add to the sailing experience. Sailing a classic yacht can be a unique and rewarding experience, as it allows sailors to connect with the rich history of sailing and to appreciate the craftsmanship of these yachts.
• Maintenance: Classic yachts require more maintenance than other types of yachts, as they are often older and may require more repairs and restoration.
• Expensive: Classic yachts can be expensive to purchase, maintain, and restore, especially if they are in high demand or have a rich history.
• Limited amenities: Classic yachts often have limited amenities, which can make them less comfortable than newer yachts. They may not have modern features such as air conditioning, generators, and refrigeration, which can be a drawback for longer trips or live-aboard cruising.
• Limited performance: Classic yachts are not built for speed and performance, as they were not designed for racing and competitive sailing events. They may not perform as well as newer yachts in racing conditions.
• Limited availability: Classic yachts are not as readily available as newer yachts, and it can be difficult to find one that fits your needs and budget.

Overall, classic yachts are a great choice for sailors who appreciate the beauty and craftsmanship of traditional sailing yachts, and want to experience the unique sailing experience that these yachts offer. However, they can be expensive to purchase and maintain, and may not have the same level of amenities and performance as newer yachts. They also require more maintenance and expertise to keep in good condition.

No matter what type of sailing yacht you choose, it is important to consider the features and characteristics that are most important to you, and to choose a yacht that will suit your needs and preferences. Whether you’re a seasoned sailor or a beginner, there is a yacht out there that will fit your needs.

Steven T. Anderson

Steven Taylor Anderson is an experienced sailor and author who writes for sailingbetter.com. He has been sailing for over 20 years across the USA and has taken several courses to improve his skills. He has also navigated throughout the world on various boats and yachts. His passion for sailing and knowledge of the sport shines through in his writing, making him a respected authority on the subject.

Recent Posts

Lagoon vs Leopard Catamaran: Which Sailboat Is Right for You?

Introduction When it comes to cruising on the open waters, catamarans have gained immense popularity for their stability, space, and comfort. Two of the leading catamaran manufacturers, Lagoon and...

How to Determine Sailboat Weight: A Comprehensive Guide

Introduction Sailing is a thrilling and adventurous activity that has captivated humans for centuries. Whether you are a seasoned sailor or a novice looking to set sail for the first time,...

A Complete Guide to Yacht Types and Sizes

• by yachtman
• August 28, 2023 August 26, 2023

Yachts, symbols of luxury and leisure, provide a stunning escape. From motor yachts to sailing yachts, the world of yachting is both diverse and captivating. Journey with us as we explore the different types and sizes of yachts, uncovering their secrets.

Climb onboard a superyacht , the queen of the seas. These floating palaces boast remarkable dimensions, with amenities such as swimming pools, helipads, and even submarines. Ideal for those seeking indulgence, superyachts are the epitome of yachting excellence.

For a more intimate experience, try a luxury motor yacht . With powerful engines, they let you visit multiple destinations quickly. Enjoy the lap of luxury as you cruise across the sea, appreciating every moment on board these vessels.

Sailing lovers will appreciate classic sailing yachts . Watch their silhouettes gracefully cut through the waves, powered by wind. Feel the passion for sailing, and the freedom, on an adventure akin to ancient seafarers. Uncover your inner explorer while savoring unparalleled serenity.

Catamarans are ideal for sailing with precision and finesse. With twin hulls offering stability and space, catamarans offer great comfort. Enjoy vibrant sunsets to tranquil anchorages, and bliss on water, with these versatile vessels.

For those keen on exploration, expedition yachts are perfect. Built tough and with advanced tech, they are designed for explorations to remote areas. Discover untouched landscapes, encounter wildlife, and make memories in the far-flung corners of the world.

Types of Yachts

Sailboats to mega-yachts – there’s a large choice of yachts. Let’s delve into the types and sizes that meet different needs.

Take a gander at the table below for an overview of yachts:

Sailing yachts are graceful and use wind power. Motor yachts are speedy and powered by engines.

Catamarans stand out with their steadiness and roominess – great for a leisurely cruise. Trawler yachts are great for long-distance trips because they’re fuel-efficient and have comfy living areas.

Adventurous souls should check out expedition yachts . Flybridge yachts have an extra deck level for entertainment and relaxation.

Sports fisher yachts are designed for fishing, with special gear and amenities.

Don’t miss out on your dream yacht – find the perfect one and go on amazing sea experiences. Start your journey now!

Sizes of Yachts

Yachts come in plenty of sizes, each with its own unique features and capabilities. To discover the perfect yacht for your needs, let us explore the sizes of yachts via a table showcasing their specifications.

Here’s what the table looks like:

Moreover, take into account that certain yachts have stability systems, others prioritize speed, and some are customized. I once met a yacht owner who wanted a retractable roof! With the help of creative builders, his dream was fulfilled and he got to enjoy a unique experience on the open seas.

Factors to Consider in Choosing the Right Yacht

Making the right yacht choice involves many key points to think about. These include size, type, budget, use and preferences, like amenities . To decide wisely, assess each factor and see how important they are. Here’s a table of the main considerations when choosing a yacht:

In addition, there are unique details you should consider, like if you plan to charter your yacht when not in use, go for a popular model. If privacy is important, choose a yacht with separate crew quarters. So, here are some tips for making the right choice:

• Get expert advice from experienced yacht brokers or naval architects.
• Choose respected brands that hold their value in case you resell.
• Visit boat shows and yacht exhibitions to explore different models and talk to professionals.

By taking all factors into account and following these suggestions, you can find the perfect yacht that fits your needs. Whether for leisure or adventure, the right yacht will give you amazing memories on the sea.

So many options! In this guide, we explore yacht types and sizes, helping you find the perfect vessel. From sailing yachts to motor yachts , each one offers a unique experience. Plus, you can customize your yacht for a truly special journey.

Let me tell you about James . He dreamed of a yacht that matched his adventurous spirit. So, he found a builder who specialized in customization. The result was amazing – a sleek motor yacht with state-of-the-art diving gear, space for fishing equipment, and luxurious comforts. On his customized vessel, James cruised beautiful coastlines and made memories that will last forever.

When you search for your yacht, remember that customization is key. You can have a tranquil sailing experience or a thrilling adventure. Dive into the ocean of possibilities – your imagination is the only limit.

Frequently Asked Questions

FAQ 1: What are the different types of yachts?

There are various types of yachts, including motor yachts, sailing yachts, catamarans, trimarans, superyachts, and expedition yachts. Each type offers unique features and advantages.

FAQ 2: What is the difference between a motor yacht and a sailing yacht?

A motor yacht, as the name suggests, is powered by an engine and offers more speed and convenience. On the other hand, a sailing yacht relies on wind power and provides a traditional sailing experience with a slower pace.

FAQ 3: What is a superyacht?

A superyacht is a luxury yacht with high-end amenities and extravagant features. These yachts often offer spacious cabins, multiple decks, swimming pools, helipads, and other luxurious facilities.

FAQ 4: What is the average size of a yacht?

Yachts can vary greatly in size. The average size of a yacht ranges from 30 to 60 feet. However, larger yachts, known as superyachts, can measure over 100 feet in length.

FAQ 5: What is the advantage of a catamaran or trimaran?

Catamarans and trimarans provide more stability due to their dual or triple hull design. They offer spacious interiors, increased deck space, and enhanced fuel efficiency compared to traditional monohull yachts.

FAQ 6: What is an expedition yacht?

An expedition yacht is designed for long-range cruising and exploring remote destinations. These yachts feature robust construction, advanced navigation systems, and ample storage for supplies and equipment.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Types of Sailboats, Activities and Uses

Sailboats may be boats with sails, but they’re not one homogenous category. Sailboat types differentiate by design and use, and even the type of culture that permeates each subgroup. Let’s divide sailboats by hull types, rig types and activities/uses.

Explore Sailboat Brands

Sailboat Hull Types

Sailboats ride on different hulls, which differ in the total number of hulls and their shape. The basic three hull types include:

• Monohulls (one hull)
• Catamarans (two hulls)
• Trimarans (three hulls)

Monohulls have one hull but that doesn’t make them all the same. Traditional monohulls may have full keels (heavy encapsulated ballast that runs along the bottom of the hull), cutaway keels (similar to full but the forefoot is cutaway allowing the boat greater maneuverability in tight quarters) or bolted on fin keels that may have a bulb at the bottom for extra ballast to keep the vessel stable.

Monohulls can also have a swing keel, daggerboard or centerboard that retracts up into an appendage in the hull itself. With the keel or board up, the boat can enter shallow water and can travel faster downwind. With the keel down, the vessel tracks better upwind.

Small monohulls like sailing dinghies, may also have shallow planing hulls that can surf off a wave. Finally, monohulls can also foil on appendages (usually made of carbon fiber) with the actual hull out of the water when a minimum speed is reached.

Catamarans (often nicknamed "cats") have two hulls with a deck or trampoline in between. Large cats (35 feet and over) have become popular in charter use because they offer more interior and deck space and an easier motion to induce less seasickness. Small catamarans usually have just a trampoline in between the hulls and make fun daysailers.

Because catamarans don’t have deep and heavy keels, they tend to sail faster off the wind. Foiling catamarans were made popular by the America’s Cup races and are proliferating into general cruising use.

Trimarans have three hulls: a main hull and two amas (side hulls used for stability). On some trimarans, the arms that hold the amas can fold inward, making the trimaran narrower and in some cases trailerable. Large cruising trimaranas are gaining popularity because they are stable and fast sailers.

Sailboat Rig Types

Sailboat rigging includes:

• the mast(s);
• and the shrouds or stays that hold up the mast.

A sailboat with one mast is usually a sloop with one mainsail and one headsail.

A cutter rig usually has one mast but two or more headsails. This rig “cuts” the foretriangle between the head (forward) stay and the main mast. Multiple headsails allow for flexible sail combinations in variable wind conditions.

Ketches and yawls have a secondary mast behind the main one. The ketch configuration places that mizzenmast behind the mainmast but ahead of the rudderpost while the yawl places it behind the post. The second mast is shorter than the main mast. Both of these designs (split rigs) provide more sail area that isn’t reliant solely on the height of the mainmast and therefore can be easier to manage when sailing shorthanded.

Schooners also have multiple masts—two or more. However, the foremost mast is shorter than the main mast. Tall ship rigging is in its own category and can get quite complex.

Sailboat Types by Primary Use

You can do many of the same things on all sailboats, but some types are more specialized.

Sailing dinghies: Small boats usually sailed by one or two people, sailing dinghies are often used to teach new sailors. That said, experts on high tech sailing dinghies compete in athletic racing up to Olympic level.

Day cruisers: Although any sailboat can be cruised for a day, day cruisers are often boats shorter than 30 feet that are designed to be sailed for an afternoon. They’re usually more Spartan in their outfitting and may or may not have a cabin with amenities.

Sailing cruisers: These sailboats can be monohulls or multihulls and are designed to cruise for weekends or longer. They usually have a berth (bed), a head (toilet) and a galley (kitchen). They can be sloop, cutter, ketch, yawl or schooner-rigged and vary in length (from 25-85 feet). Larger sailboats tend to fall into the crewed superyacht category.

Racing sailboats: Most offshore racers are larger boats crewed by multiple individuals while smaller racers can be single or double-handed. Racing boats are usually built lighter, have fin keels and laminate performance sails.

Racer/cruisers: These designs try to straddle the two above. They’re usually more lightly built cruisers with full amenities so they can be weekended. Some people will argue that these boats are a compromise for owners who want to primarily cruise but also race.

Bluewater cruising sailboats: These boats are designed to cross oceans or sail “blue waters.” They’re typically heavier in build with a stout rig and are fully equipped for extended offshore use.

Motorsailers: This term has fallen out of favor since it’s often pejorative. These sailboats may rely on the engine to sail in light wind conditions, especially due to their excessive weight.

Antique/classic sailboats: These are usually older restored vessels. They may be built of wood and have classic yawl rigs. These sailboats are often showcased in special events.

Sailboats occupy multiple segments and experienced sailors learn the finer points of design and use. Then, they never see two sailboats the same way again.

Read Next: Buying a Sailboat: Factors to Consider

You Might Also Like:

• Why Sailing?
• Learning the Basics of Sailing
• Sailing Basics: 10 Nautical and Sailing Terms to Know
• Explore Sailboat Brands & Manufacturers

Join Our Newsletter!

Get community news, buying bargains, and how-to guides at your fingertips.

Types of Sailboats – A Comprehensive Classification

Traditionally, sailboats were made of marine wood and other materials however; modern ones use premium marine lumber products. Sailboats are divided into subclasses, and one such is the catamaran which is made of fiberglass, which makes it more durable and low maintenance.

Sailboats are propelled by wind captured through their sails, masts and rigging lines. Some are equipped with generators, wind makers and other technologies to generate more power, hence providing more speed. They are considered a separate class of vessels independent of motor-powered crafts since their hydrodynamic characteristics differ.

They can vary in occupancy from single-seater crafts for competitions or adventure sailing to recreational vessels spanning hundreds of metres that can host up to thirty individuals. The luxury yachts are ideal to experience sailing in comfort and style. These vessels are known for their remarkable craftsmanship and innovative design.

The most common type of sailboat is the racing sailboat, used in sailing competitions around the world. Several international events intended to raise awareness about sailing allow a wide range of craft types to participate, including catamarans and racer-cruiser.

For most sailing vessels, sail plans are often drawn up before the vessel leaves port. These plans indicate sail positions for various weather conditions.

In this article, we will go through the different types of sailboats and their key features.

Hull-Based Classification Of Sailboats

Sailboats can be classified into three distinct types based on their primary hull type.

These include

• catamarans, and
• multi-hull crafts.

Traditionally, monohulls are the most common design for sailboats since they provide storage in addition to a certain level of stability.

However, with the advent of sailing competitions and an increased focus on performance and stability features, there has been a general shift towards catamarans and trimarans.

Monohulls are single-hulled structures, much like conventional vessels , that have a large hull beam (breadth) which provides stability while sailing. The advantage of having a single large hull is that the longer beam allows for improved onboard systems and amenities. It has a cabin, a cockpit, a galley, a v-berth and a saloon as well.

Catamarans refer to twin-hulled structures that are attached by specialized members to provide strength. The term originates from the South Indian phrase for “tied pieces of wood”, as this was the manner in which traditional sailboats were built in the subcontinent.

Twin hulls offer an increased level of stability. In addition, if designed properly the vessel will have a much higher speed than conventional crafts owing to lower wetted-surface resistance forces.

On the other hand, extensive care must be taken in designing the vessel, or else the resistive forces can exceed the values found in monohulls.

Multi-hull crafts, or simply multihulls,  include vessels with anywhere between three to five hulls, although the three-hull variation is the most common. Such crafts are known as trimarans and are considered to be extremely stable owing to their large beam and lower centre of gravity.

Four and five-hulled vessels are more difficult to manufacture and hence are rarely used commercially. An advanced form of the catamaran design is the SWATH version.

SWATH is an acronym for Small Waterplane Area Twin Hull, and it achieves unprecedented levels of speed owing to a considerably small waterplane area. To reduce this area, the hull has a reduced beam above the surface of the water, while underwater buoyant structures ensure that the vessel has the necessary weight balance.

Common Monohull Designs

Monohulls are relatively easier to manufacture compared to multi-hull structures. Thus, there has been a wider range of innovations for this type of hull over the last thousand years.

The common classes of monohull crafts are – sailing dinghies, cutters, sloops, catboats, ketch and schooners.

A dinghy is a relatively common sailboat owing to its short overall length and ease of manoeuvring. They are used in competitions and in the port industry.

Generally, dinghies are used to transport people or small cargo to and from a larger vessel such as a cruise ship that is anchored away from the shore.

Such vessels may not be able to enter a port due to size and tonnage regulations. Hence, dinghies serve as the best mode of transporting essential goods between the port and the vessel.

Dinghies can have sails, such as the three-sailed variant consisting of the mainsail, jib and spinnaker. However, motor-powered dinghies are also commonly used especially as lifeboats onboard ships.

Cutters are another class of sailboats that are medium-sized and generally have three sails. The mainmast on which the sails are mounted is located near the stern of the ship to allow for larger sails to be used.

Cutters were commonly used in competitions as their design favours speed and agility. A different combination of the sails also allows cutters to be used for cruises and other recreational sailboats.

Sloops are similar to cutters and are the most commonly found sailboats. They are the standard in sail designs, with a two-sail configuration used for added manoeuvrability. They have a mainsail and a headsail called jib or genoa.

In addition to the generic sloop sail configuration, there is also a fractionally-rigged sloop in which one of the sails lies below the top of the mast.

This design allows the crews of smaller sloops to handle the craft while improving performance. Catboats are sailboats equipped with only a single sail. They are aimed at capacity rather than speed and have the mainsail mounted on a single mast.

For increased speeds, sails can be added to the rigging such that wind force is better optimized by the vessel.

The ketch is a sailboat that has two main masts- the main mast located around the midship, and the mizzen mast at the aft. The mizzen mast is generally smaller than the main mast and serves to add speed to the craft. The word ketch is derived from the word catch, denoting the manner in which the sails “catch” the wind as they move.

Schooners are a class of sailboats that can have more than two sails supported on masts known as the main mast and foremast. The foremast is located near the fore of the vessel and is slightly shorter than the main mast. In variations where additional masts are added to support more sails, they are positioned such that they remain shorter than the main mast depending on their sizes.

Keel Based Classification

The keel is the base of a vessel that provides a central backbone for the design of the entire structure. The boat keel is structurally relevant since it often has to carry the weight of the vessel.

In the case of sailboats, the keel is often what the entire craft rests on during transport by road or rail. Thus, keels need to have integral strength and be able to withstand a variety of forces.

Similarly, while sailing, the keel is the lowermost point of the vessel at which resistive forces act. As a result, many modifications are often made to the keel so that hydrodynamic features can be incorporated to reduce drag. Sailboats often sit high in the water owing to their design and shape.

However, for competition and performance crafts, it is essential that they try to sit as close to the surface of the water as possible without capsizing. Thus, the keel often plays the role of a central ballast, by integrating heavy iron or steel components so that the vessel draft increases.

Based on keel type, there are several sailing boat variants found in the market. These generally have modified keels for improving performance and speed by integrating hydrodynamic features such as hydrofoils .

The types of keels commonly associated with sailboats are as follows: full-length keel, fin keel, centreboard keel, bilge keel, bulb keel and wing keel.

As the name suggests, full-length keels have keels that extend in the form of a long fin below the main structure of the ship. The fin runs along the length of the ship and often has an integrated rudder system attached at the stern.

The advantage of this type of keel is that it is easy to manufacture, with little cost in terms of development. Also, the ballast effect is provided by the extra weight of the full-length keel.

Since it can be difficult to enter certain ports or quays owing to the large draft that comes with this type of keel, manufacturers attempt to reduce fin depth and instead increase its length.

Fin keels , on the other hand, run only along certain regions of the sailboat. Located on the underside of the craft, it sticks out similar to the fin of a fish giving rise to this nomenclature. Since this type of keel must perform the same functions as the full-length keel without having a large length, the fin is deeper.

Owing to this large draft, it may be difficult to dock at certain ports due to depth restrictions. A key feature of this type of keel is that the rudder and manoeuvring systems remain independent of the fin keel, and are located at the extreme aft of the vessel. Centreboard keels are a common feature of high-performance crafts that take part in competitions. They are not restricted to monohull structures and are often found in catamarans and trimarans.

The centreboard keel employs a type of fin that is pivoted about a point on the keel of the vessel. By having a pivot, the natural flow of the vessel and surrounding water varies the depth at which the keel sits below the vessel. Similar to the fin keel, it only runs along a certain length of the vessel.

However, it is distinguished by being able to vary the angle of tilt with respect to the baseline of the craft. In some variations, the crew are able to manually change the angle of tilt, to change performance features during certain events and competitions.

Another variation of the centreboard keel is the daggerboard keel , which allows the fin to completely integrate into the underside of the vessel.

By providing a bay at the underside, the fin can be raised or lowered from the slot. In this type of keel, the raised configuration allows for higher speeds and reduced resistive forces. However, when lowered into the water, the vessel gains added stability and makes up for the loss in speed by improving hydrodynamic features.

Bilge keels refer to protrusions on the sides of the hull of the vessel, commonly called the bilges. These protrusions run along the length of the vessel while tapering into the hull panels at both ends.

The primary purpose of bilge keels is to improve the rolling stability of the craft. The fins stick out perpendicular to the hull and can vary in length depending on the purpose. For instance, sailboats require larger anti-roll stability and hence have long tapering bilge keels.

The bilge keels must be symmetrically placed on both the port and starboard sides, so as to ensure even hydrodynamic characters.

A bulb keel is a protrusion sticking vertically below the craft and terminating in an oblong-shaped hydrodynamic device called the bulb. The bulb acts as a 3D hydrofoil that improves the stability and handling of the vessel. Due to the increased wetted surface area, there is a slight drop in the speed, but it can be made up through superior handling capabilities.

For smaller crafts, longer bulb keels are required, and as this length increases, the chance of accidental grounding of the vessel increases.

The last commonly found type of keel is the wing keel . The wing keel is similar to the bulb keel, except that instead of a bulb terminating a vertical protrusion, there are horizontal hydrofoils extending from the central shaft.

The primary purpose of the wings underneath the ship is to improve handling and stability. In addition, they slightly lift the craft above the surface of the water. As a result, the total wetted surface area remains constant and may even decrease. Thus, speed remains constant and may improve as the craft picks up velocity.

Mast Based Classifications

The mast of the vessel refers to a vertical shaft extending out of the deck which supports the sails and rigging. Older models of sailboats and ancient ships had masts constructed out of wood, while modern speed-oriented versions use galvanized steel or aluminium.

Aluminium has the benefit of being extremely light while still retaining its strength, which is important during harsh weather conditions.

The various mast-based classification includes – sloop, fractional-rig sloop, cutter, ketch, schooner and catboat.

The sloop is the most common mast type, where a single mast supports two sails called the headsail (or foresail) and the mainsail.

The headsail also goes by different names depending on the purpose and configuration of the sails.

In a fractional rig sloop , the forestay cable that is used to hoist the headsail is actually placed below the top of the mast. This configuration is particularly useful when it comes to performance, as the tip of the mast can be hauled towards the aft using stiff cables, and the sails can be collapsed.

This is useful on days when wind power can be used to propel the sailboat, without the sails having to be fully extended.

Another useful feature of being able to trim or flatten the sails is that during particularly strong squalls of wind, the sails will not be punctured or ruptured due to the high wind pressure. The next type of mast configuration is the cutter. This involves a single mast supporting three sails- one mainsail, and two headsails known as the staysail hauled by the inner stay cable, and the jib hauled by the headstay cable.

The mast is located more towards the aft compared to the sloop, to allow for an easily manoeuvrable configuration. In addition, a wide range of sail arrangements makes it favourable for cruise operators and for competition purposes.

The ketc h has a two-mast configuration, with the aft mast known as the mizzen mast. The mizzen mast is located fore of the rudder post, and aft of the main mast.

The mizzen sail rests on the mizzen mast. In general, the mizzen mast is slightly shorter than the main mast.

The main mast supports two sails known as the mainsail and the headsail.

The schooner is another configuration similar to the ketch, but where the aft mast is taller than the foremast.

Schooners can have multiple masts and are not restricted to commercial small and medium sailboats. The images of ancient ships that were used for trade and military purposes were often schooners having between four to six masts with an average of over ten sails each.

In addition, the sails of the schooner tend to lie along the length of the vessel, rather than along the beam. This is to prevent sail rupture during violent storms or during heavy winds. The catboat is one of the simplest configurations where only a single sail and mast arrangement are used.

The mast can be located either aft or fore of midships, with varying advantages to each configuration. The ease of design and construction makes it a favourable sailboat for beginners and trainees. However, the disadvantage behind the catboat is that the sail cannot be used to move against the direction of the wind, unlike other sail variations.

Apart from recreation purposes, sailboats are one of the most common types of vessels used in recreational purposes and competitions. They can vary in the hull, keel and sail configurations based on the primary purpose that they are intended to be used for.

For over five thousand years, sailboats have been in use, whether it has been for transportation in Ancient Egypt, or for sailing events in modern times. Technological advancements have turned the sailboat into a sleek, agile and fast vessel capable of reaching extremely high speeds by harnessing the power of the wind.

Whether it be for cruises or for racing events, sailboats and other such crafts continue to be a favourite choice for sailors.

Frequently Asked Questions About Sailboats

1. how many different kinds of sailboats are there.

There are many types based on their hull type- monohulls, catamarans and trimarans; keel type- fin keel, wing keel, daggerboard, centreboard; mast configuration and sails- sloop, fractional rig sloop, schooner, ketch, yawl, cutters and catch.

2. What is the most common type of sailboat?

The sloop is the most common sailboat. It has a mast, two sails, commonly a Bermuda rigged main and a headsail. They include a gaff rig, a mix of gaff and square rig or a Bermuda rig.

3. What is a four-masted sailboat called?

It is called a schooner. Traditional schooners have a gaff-rig, which means that they have a square topsail on the front of the mast. They were mainly constructed for carrying cargo, passengers and for fishing.

4. How many masts does a ketch have?

Ketch has two masts whose main mast is taller than the mizzen mast. It is similar to a yawl and has a triangular mizzen sail and a triangular or square headsail. Due to their smaller sails, they are easily manageable and preferred by sailors.

5. What is the most beautiful sailboat?

Some of the most beautiful sailboats in the world include Pelagic Australis, Thomas W Lawson, Royal Clipper, Barque Sedov and Amerigo Vespucci.

6. What are some popular sailboat brands?

Beneteau, Sparkman and Stephens, Oyster Yachts, Amel Yachts and Nautor’s Swan are some popular sailboat brands that sell the most number of sailboats yearly.

You Might also like to read

• Real Life Accident: Officer Of The Watch Ignores Lookout’s Warning, Ship Collides with Sailboat
• Introduction To Different Types Of Yachts
• 12 Sailing Books For Beginners
• The Ultimate Guide to Different Types of Boats – Top 20
• Main Types of Catamarans Used in the Shipping World
• What are Tug Boats – Types And Uses

Disclaimer : The information contained in this website is for general information purposes only. While we endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this website.

About Author

Ajay Menon is a graduate of the Indian Institute of Technology, Kharagpur, with an integrated major in Ocean Engineering and Naval Architecture. Besides writing, he balances chess and works out tunes on his keyboard during his free time.

Read More Articles By This Author >

Do you have info to share with us ? Suggest a correction

Related Articles

9 New Aspects of IACS Harmonised Common Structural Rules (CSR) For Ships

What Is The Purpose Of “Torsion Box” In Ships?

Types of Bow Designs Used For Ships

Daily maritime news, straight to your inbox.

Sign Up To Get Daily Newsletters

Join over 60k+ people who read our daily newsletters

By subscribing, you agree to our  Privacy Policy  and may receive occasional deal communications; you can unsubscribe anytime.

BE THE FIRST TO COMMENT

Leave a reply.

Your email address will not be published. Required fields are marked *

Subscribe to Marine Insight Daily Newsletter

" * " indicates required fields

Marine Engineering

Marine Engine Air Compressor Marine Boiler Oily Water Separator Marine Electrical Ship Generator Ship Stabilizer

Nautical Science

Mooring Bridge Watchkeeping Ship Manoeuvring Nautical Charts  Anchoring Nautical Equipment Shipboard Guidelines

Explore 

Free Maritime eBooks Premium Maritime eBooks Marine Safety Financial Planning Marine Careers Maritime Law Ship Dry Dock

Shipping News Maritime Reports Videos Maritime Piracy Offshore Safety Of Life At Sea (SOLAS) MARPOL

WAIT! Did You Download 13 FREE Maritime eBooks?

Sign-up and download instantly!

We respect your privacy and take protecting it very seriously. No spam!

WAIT! Did You Download 12 FREE Maritime eBooks?

• Types of Sailboats
• Parts of a Sailboat
• Cruising Boats
• Small Sailboats
• Design Basics
• Sailboats under 30'
• Sailboats 30'-35
• Sailboats 35'-40'
• Sailboats 40'-45'
• Sailboats 45'-50'
• Sailboats 50'-55'
• Sailboats over 55'
• Masts & Spars
• Knots, Bends & Hitches
• The 12v Energy Equation
• Electronics & Instrumentation
• Build Your Own Boat
• Buying a Used Boat
• Choosing Accessories
• Living on a Boat
• Cruising Offshore
• Sailing in the Caribbean
• Anchoring Skills
• Sailing Authors & Their Writings
• Mary's Journal
• Nautical Terms
• Cruising Sailboats for Sale
• List your Boat for Sale Here!
• Used Sailing Equipment for Sale
• Sell Your Unwanted Gear
• Sailing eBooks: Download them here!
• Your Sailboats
• Your Sailing Stories
• Your Fishing Stories
• Advertising
• What's New?
• Chartering a Sailboat

The Different Types of Sailboats

If you’re a sailboat fanatic like me, all types of sailboats will attract your attention. Some more so than others admittedly, but all will have something about them that catches your eye.

If you’re not a fanatic (not yet, that is) but just an interested observer, then the first thing you’ll notice about a sailboat will be how many masts it has and the configuration of its sails - in other words, its 'rig'.

This observation alone will enable you to identify the five main types of sailboats — sloops, cutters, ketches, yawls and schooners - all of which are described here.

But apart from the various rig types, you can describe types of sailboats from a different viewpoint - sailing dinghies, dayboats, motorsailors, monohulls, catamarans and trimarans. 

Let's make a start with the various rig types...

A single-masted sailboat with just two sails — a foresail (aka headsail or jib) and a mainsail — is a sloop, the purest type of sailboat.

The sloop rig can also be described as a Bermuda rig, Bermudian rig or Marconi rig.

Read more about sloops...

Examples of Sloops

If a sloop has an additional sail between the headsail and the mainsail, then it's no longer a sloop - it's a cutter.

Some cutters - like the one shown here - have the foresail set forward on a bowsprit, with the inner forestay permanently rigged to the stemhead where the foresail otherwise would be, or to a central chainplate further aft on the foredeck.

Read more about cutters...

Examples of Cutters

The following boats may look like cutters with their double headsails, but they're not cutters at all...

To find out why, click here...

A ketch is a two-masted sailboat, a main mast forward and a shorter mizzen mast aft.

But not all two-masted sailboats are ketches — they might be yawls (see below).

A ketch may also sport a staysail, with or without a bowsprit, in which case it would be known as a cutter-rigged or staysail ketch.

Read more about ketches...

Examples of Ketches

Note that the Ocean 71 and the Irwin 52 are cutter-rigged, and are traditionally referred to as Staysail Ketches .

Cat Ketches

Cat-ketches are recognised by the lack of any standing rigging to support their pair of unstayed masts.

And yes, if the after mast is taller than the foremast then it's called a cat- schooner sailboat.

Read more about cat-ketches...

Yawls have their origins as old-time sail fishing boats, where the small mizzen sail was trimmed to keep the vessel steady when hauling the nets.

Much like a ketch, the difference being that the yawl has the mizzen mast positioned aft of the rudder post whereas the ketch has its mizzen mast ahead of the rudder post.

You’ll not be surprised to learn that a yawl with a staysail is known as cutter-rigged yawl.

A schooner is a two-or-more masted sailboat, in which the aft-most mast - the mainmast - is the same height or taller than the foremast.

The one shown here is gaff cutter rigged, with a topsail set on the mainmast.

Many sailors agree that of all the different types of sailboats, a schooner under full sail is one of the most beautiful sights afloat.

Gaffed-rigged sailboats, or 'gaffers', have their mainsail supported by a spar - the 'gaff' - which is hauled up mast by a separate halyard.

Often these types of sailboats are rigged with a topsail, as shown here and in the gaff schooner above, which really adds some grunt in light airs.

All this comes at a price of course, both in terms of material cost and weight aloft, which is why very few modern yachts are fitted with gaff rigs these days.

All artwork on this page is by Andrew Simpson

Examples of the Various Types of Sailboats...

Other Types of Sailboats

The seven sailboat rig variations shown here are the most popular types of modern cruising boat rigs, but there are other rig versions which were once found on commercial, fishing, and naval sailing vessels.

They include:

• Full square-rigged sailing vessels
• Barkentines
• Brigantines

And you can see examples of them here ...

In this article I've said that ketches, yawls and schooners with two headsails can be called cutter rigged. This is a commonly used description but strictly speaking, there's only one rig that can accurately be called a cutter - and that's a single-masted sailboat with two headsails. My thanks to 'Old Salt' for drawing my attention to this!

Recent Articles

Used Sailing Equipment For Sale

Jun 14, 24 03:54 AM

Beneteau Oceanis 473 Clipper for Sale

Jun 13, 24 11:13 AM

Hallberg Rassy 42e for Sale

May 23, 24 03:01 AM

Here's where to:

• Find  Used Sailboats for Sale...
• Find Used Sailing Gear for Sale...
• List your Sailboat for Sale...
• List your Used Sailing Gear...

Our eBooks...

A few of our Most Popular Pages...

Copyright © 2024  Dick McClary  Sailboat-Cruising.com

Sail Rigs And Types - The Only Guide You Need

Last Updated by

Daniel Wade

June 15, 2022

A well-designed sailboat is a thing of pure beauty. Whether you're a proud owner of one, a guest on one, or a shore-side admirer, you'll fall in love with the gliding sails, the excitement of a race, and the eco-friendly nature of these sophisticated yet magnificent vessels. With good sails, great design, and regular maintenance, sails and rigs are an important part of a sailboat.

If you’re thinking about going sailing, one of the first things you have to understand is the variety of modern sail plans. Unlike old sailboats, modern sailboats don't need huge, overlapping headsails and multiple masts just to get moving. In the past, when sailboats were heavy, keels were long, the only way to get the boat moving was with a massive relative sail area. You needed as much square footage as you could just to get your sailboat moving. But with the invention of fiberglass hulls, aluminum or composite masts, high-tensile but low diameter lines and stats, and more efficient sails, sailboats no longer need to plan for such large sail plans.. Still, there are various rig styles, from the common sloop, to the comfortable cat-rig, to the dual masted ketch and schooner, there are various sail types and rigs to choose from. The most important thing is to know the different types of sails and rigs and how they can make your sailing even more enjoyable.

There are different types of sails and rigs. Most sailboats have one mainsail and one headsail. The mainsail is generally fore-and-aft rigged and is triangular shaped. Various conditions and courses require adjustments to the sails on the boats, and, other than the mainsail, most boats can switch out their secondary sail depending on various conditions.. Do you want to sail upwind or go downwind? You cannot hoist just any sail and use it. It's, therefore, of great importance to understand how and when to use each sail type.

In this in-depth article, we'll look at various sail types and rigs, and how to use them to make your sailing more enjoyable.

Table of contents

Different Sail Types

It is perhaps worth noting that a sailboat is only as good as its sails. The very heart of sailing comes in capturing the wind using artfully trimmed sails and turning that into motion. . Ask any good sailor and he'll tell you that knowing how and when to trim the sails efficiently will not only improve the overall performance of your boat but will elevate your sailing experience. In short, sails are the driving force of sailboats.

As such, it's only natural that you should know the different types of sails and how they work. Let's first highlight different sail types before going into the details.

• Jib - triangular staysail
• Spinnaker - huge balloon-shaped downwind sail for light airs
• Genoa - huge jib that overlaps the mainsail
• Gennaker - a combination of a spinnaker and genoa
• Code zero - reaching genoa for light air 
• Windseeker - tall, narrow, high-clewed, and lightweight jib
• Drifter - versatile light air genoa made from particularly lightweight cloth
• Storm jib - a smaller jib meant for stormy conditions
• Trysail - This is a smaller front-and-aft sail for heavy weather

The mainsail is the principal sail on a boat. It's generally set aft of the mainmast. Working together with the jib, the mainsail is designed to create the lift that drives the sailboat windward. That being said, the mainsail is a very powerful component that must always be kept under control.

As the largest sail, and the geometric center of effort on the boat, the mainsail is tasked with capturing the bulk of the wind that's required to propel the sailboat. The foot, the term for the bottom of any sail, secures to the boom, which allows you to trim the sail to your heading. The luff, the leading edge of the sail, is attached to the mast. An idealized mainsail would be able to swing through trim range of 180°, the full semi-circle aft of the mast, though in reality, most larger boats don’t support this full range of motion, as a fully eased sail can occasionally be unstable in heavy breeze.

. As fully controlling the shape of the mainsail is crucial to sailing performance, there are many different basic mainsail configurations. For instance, you can get a full-batten mainsail, a regular mainsail with short battens, or a two-plus-two mainsail with two full-length battens. Hyper-high performance boats have even begun experimenting with winged sails which are essentially trimmable airplane wings! Moreover, there are numerous sail controls that change the shape by pulling at different points on the sail, boom, or mast. Reefing, for instance, allows you to shorten the sail vertically, reducing the amount of sail area when the boat is overpowered.

Features of a Mainsail

Several features will affect how a particular sail works and performs. Some features will, of course, affect the cost of the sail while others may affect its longevity. All in all, it's essential to decide the type of mainsail that's right for you and your sailing application.

Sail Battens, the Roach, and the Leech

The most difficult part of the sail to control, but also the most important, are the areas we refer to as the leech and the roach. The roach is the part of the sail that extends backwards past the shortest line between the clew, at the end of the boom, and the top of the mast. It makes up roughly the back third of the sail. The leech is the trailing edge of the sail, the backmost curve of the roach. Together, these two components control the flow of the air off the back of the sail, which greatly affects the overall sail performance. If the air stalls off the backside of the sail, you will find a great loss in performance. Many sail controls, including the boom vang, backstay, main halyard, and even the cunningham, to name a few, focus on keeping this curve perfect. 

As for parts of the sail itself, battens control the overall horizontal shape of the sail. Battens are typically made from fiberglass or wood and are built into batten pockets. They're meant to offer support and tension to maintain the sail shape Depending on the sail technology you want to use, you may find that full battens, which extend from luff to leech, or short battens, just on the trailing edge, are the way to go. Fully battened sails tend to be more expensive, but also higher performance.

Fully Battened Mainsails

They're generally popular on racing multihulls as they give you a nice solid sail shape which is crucial at high speeds. In cruising sailboats , fully battened mainsails have a few benefits such as:

• They prevent the mainsail from ragging. This extends the life of the sail, and makes maneuvers and trimming easier for the crew.
• It provides shape and lift in light-air conditions where short-battened mainsails would collapse.

On the other hand, fully-battened mainsails are often heavier, made out of thicker material, and can chafe against the standing rigging with more force when sailing off the wind.

Short Battens

On the other hand, you can choose a mainsail design that relies mostly on short battens, towards the leech of the sail. This tends to work for lighter cloth sails, as the breeze, the headsail, and the rigging help to shape the sail simply by the tension of the rig and the flow of the wind. The battens on the leech help to preserve the shape of the sail in the crucial area where the air is flowing off the back of the sail, keeping you from stalling out the entire rig.

The only potential downside is that these short battens deal with a little bit of chafe and tension in their pockets, and the sail cloth around these areas ought to be reinforced. If your sails do not have sufficient reinforcement here, or you run into any issues related to batten chafe, a good sail maker should be able to help you extend the life of your sails for much less than the price of a new set.

How to Hoist the Mainsail

Here's how to hoist the mainsail, assuming that it relies on a slab reefing system and lazy jacks and doesn't have an in-mast or in-boom furling system.

• ‍Maintain enough speed for steeragewhile heading up into the wind
• Slacken the mainsheet, boom vang, and cunningham
• Make sure that the lazy jacks do not catch the ends on the battens by pulling the lazy jacks forward.
• Ensure that the reefing runs are free to run and the proper reefs are set if necessary.
• Raise the halyard as far as you can depending on pre-set reefs.
• Tension the halyard to a point where a crease begins to form along the front edge
• Re-set the lazy jacks
• Trim the mainsail properly while heading off to your desired course

So what's Right for You?

Your mainsail will depend on how you like sailing your boat and what you expect in terms of convenience and performance. That being said, first consult the options that the boatbuilder or sailmakers suggest for your rig. When choosing among the various options, consider what you want from the sail, how you like to sail, and how much you're willing to spend on the mainsail.

The headsail is principally the front sail in a fore-and-aft rig. They're commonly triangular and are attached to or serve as the boat’s forestay. They include a jib and a genoa. 

A jib is a triangular sail that is set ahead of the foremost sail. For large boats, the roto-furling jib has become a common and convenient way to rig and store the jib. Often working in shifts with spinnakers, jibs are the main type of headsails on modern sailboats. Jibs take advantage of Bournoulli’s Principle to break the incoming breeze for the mainsail, greatly increasing the speed and point of any boat. By breaking the incoming wind and channeling it through what we call the ‘slot,’ the horizontal gap between the leech of the jib and the luff of the mainsail, the jib drastically increases the efficiency of your mainsail. It additionally balances the helm on your rudder by pulling the bow down, as the mainsail tends to pull the stern down. .

The main aim of the jib is to increase the sail area for a given mast size. It improves the aerodynamics of the mainsails so that your sailboat can catch more wind and thereby sail faster, especially in light air

Using Jibs on Modern Sailboats

In the modern contexts, jib’s mainly serve  increase the performance and overall stability of the mainsail. The jib can also reduce the turbulence of the mainsail on the leeward side.

On Traditional Vessels

Traditional vessels such as schooners have about three jibs. The topmast carried a jib topsail, the main foresail is called the jib, while the innermost jib is known as the staysail. The first two were employed almost exclusively by clipper ships.

How to Rig the Jibs

There are three basic ways to rig the jib.

Track Sheets - A relatively modern approach to the self-tacking jib, this entails placing all the trimming hardware on a sliding track forward of the mast. This means that on each tack, the hardware slides from one side of the boat to the other. This alleviates the need to switch sheets and preserves the trim angle on both sides, though it can be finnicky and introduce friction.

Sheet up the Mast - This is a very popular approach and for a good reason. Hoist the jib sheet up the mast high enough to ensure that there's the right tension through the tack. Whether internally or externally, the sheet returnsto the deck and then back to the cockpit just like the rest of the mast baselines. The fact the hardware doesn't move through the tacks is essential in reducing friction.

Sheet Forward - This method revolves around ensuring that the jib sheet stays under constant pressure so that it does not move through the blocks in the tacks. This is possible if the through-deck block is extremely close to the jib tack. Your only challenge will only be to return the sheet to the cockpit. This is, however, quite challenging and can cause significant friction.

Dual Sheeting - The traditional method, especially on smaller dinghies, though it is not self-tacking. This requires a two ended or two separate sheet system, where one sheet runs to a block on starboard, and the other to port. Whenever you tack or gybe, this means you have to switch which sheet is active and which is slack, which is ok for well crewed boats, but a potential issue on under-crewed boats.

Another important headsail, a genoa is essentially a large jib that usually overlaps the mainsail or extends past the mast, especially when viewed from the other side. In the past, a genoa was known as the overlapping jib and is technically used on twin-mast boats and single-mast sloops such as ketches and yawls. A genoa has a large surface area, which is integral in increasing the speed of the vessel both in moderate and light winds.

Genoas are generally characterized by the percentage they cover. In most cases, sail racing classes stipulate the limit of a genoa size. In other words, genoas are usually classified by coverage.

Top-quality genoa trim is of great importance, especially if the wind is forward of the beam. This is because the wind will first pass over the genoa before the mainsail. As such, a wrongly sheeted genoa can erroneously direct the wind over the mainsail,spelling doom to your sailing escapades. While you can perfectly adjust the shape of a genoa using the mast rake, halyard tension, sheet tension, genoa car positioning, and backstay tension, furling and unfurling a genoa can be very challenging, especially in higher winds.

That being said, here are the crucial steps to always keep in mind.

• Unload and ease the loaded genoa sheet by going to a broad reach
• Do not use the winch; just pull on the furling line
• Keep a very small amount of pressure or tension on the loaded genoa sheet
• Secure the furling line and tighten the genoa sheets
• Get on the proper point of sail
• Have the crew help you and release the lazy genoa sheets
• Maintain a small tension while easing out the furling line
• Pull-on a loaded genoa sheet
• Close or cleat off the rope clutch when the genoa is unfurled
• Trim the genoa

To this end, it's important to note that genoas are popular in some racing classes. This is because they only categorize genoas based on the fore-triangle area covered, which essentially allows a genoa to significantly increase the actual sail area. On the contrary, keep in mind that tacking a genoa is quite a bit harder than a jib, as the overlapping area can get tangled with the mast and shrouds. It's, therefore, important to make sure that the genoa is carefully tended, particularly when tacking.

Downwind Sails

Modern sailboats are a lot easier to maneuver thanks to the fore-and-aft rig. Unfortunately, when sailing downwind they catch less wind, and downwind sails are a great way of reducing this problem. They include the spinnaker and the gennaker.

A spinnaker will, without a doubt, increase your sailing enjoyment. But why are they often buried in the cabin of cruising boats? Well, the first few attempts to rig and set a spinnaker can be difficult without enough help and guidance. Provided a solid background, however, spinnakers are quite straightforward and easy to use and handle with teamwork and enough practice. More importantly, spinnakers can bring a light wind passage to life and can save your engine.

Spinnakers are purposely designed for sailing off the wind; they fill with wind and balloon out in front of your sailboat. Structured with a lightweight fabric such as nylon, the spinnaker is also known as a kite or chute, as they look like parachutes both in structure and appearance. 

A perfectly designed spinnaker should have taut leading edges when filled. This mitigates the risk of lifting and collapsing. A spinnaker should have a smooth curve when filled and devoid of depressions and bubbles that might be caused by the inconsistent stretching of the fabric. The idea here is that anything other than a smooth curve may reduce the lift and thereby reduce performance.

Types of Spinnakers

There are two main types of spinnakers: symmetric spinnakers and asymmetric spinnakers.

Asymmetric Spinnakers

Flown from a spinnaker pole or bowsprit fitted to the bow of the boat, asymmetric spinnakers resemble large jibs and have been around since the 19th century. The concept of asymmetric spinnaker revolves around attaching the tack of the spinnaker at the bow and pulling it around during a gybe.

Asymmetric spinnakers have two sheets just like a jib., These sheets are attached at the clew and never interact directly with the spinnaker pole. This is because the other corner of the spinnaker is fixed to the bowsprit. The asymmetric spinnaker works when you pull in one sheet while releasing the other. This makes it a lot easier to gybe but is less suited to sailing directly downwind. There is the loophole of having the asymmetric spinnaker gybed to the side opposite of the boom, so that the boat is sailing ‘wing-on-wing,’ though this is a more advanced maneuver, generally reserved for certain conditions and tactical racing situations.

On the contrary, the asymmetric spinnaker is perfect for fast planing dinghies. This is because such vessels have speeds that generate apparent wind forward. Because asymmetrics, by nature, prefer to sail shallower downwind angles, this apparent wind at high speeds makes the boat think that it is sailing higher than it really is, allowing you to drive a little lower off the breeze than normal. . In essence, the asymmetric spinnaker is vital if you're looking for easy handling.

Symmetric Spinnakers

Symmetric spinnakers are a classic sail type that has been used for centuries for controlling boats by lines known as a guy and a sheet. The guy, which is a windward line, is attached to the tack of the sail and stabilized by a spinnaker pole. The sheet, which is the leeward line, is attached to the clew of the spinnaker and is essential in controlling the shape of the spinnaker sail.

When set correctly, the leading edges of the symmetric spinnaker should be almost parallel to the wind. This is to ensure that the airflow over the leading edge remains attached. Generally, the spinnaker pole should be at the right angles to the apparent wind and requires a lot of care when packing.

The main disadvantage of this rig is the need to gybe the spinnaker pole whenever you gybe the boat. This is a complicated maneuver, and is one of the most common places for spinnakers to rip or get twisted. If, however, you can master this maneuver, you can sail at almost any angle downwind!

How to Use Spinnaker Effectively

If you decide to include the spinnakers to your sailboat, the sailmaker will want to know the type of boat you have, what kind of sailing you do, and where you sail. As such, the spinnaker that you end up with should be an excellent and all-round sail and should perform effectively off the breeze

The type of boat and where you'll be sailing will hugely influence the weight of your spinnaker cloth. In most cases, cruising spinnakers should be very light, so if you've decided to buy a spinnaker, make sure that it's designed per the type of your sailboat and where you will be sailing. Again, you can choose to go for something lighter and easier to set if you'll be sailing alone or with kids who are too young to help.

Setting up Spinnakers

One of the main reasons why sailors distrust spinnakers is because they don't know how to set them up. That being said, a perfectly working spinnaker starts with how you set it up and this revolves around how you carefully pack it and properly hook it up. You can do this by running the luff tapes and ensuring that the sails are not twisted when packed into the bag. If you are using large spinnakers, the best thing to do is make sure that they're set in stops to prevent the spinnakers from filling up with air before you even hoist them fully.

But even with that, you cannot fully set the spinnaker while sailing upwind. Make sure to bear away and have your pole ready to go as you turn downwind. You should then bear away to a reach before hoisting. Just don't hoist the spinnakers from the bow as this can move the weight of the crew and equipment forward.

Used when sailing downwind, a gennaker is asymmetric sail somewhere between a genoa and a spinnaker. It sets itself apart because it  gennaker is a free-flying asymmetric spinnaker but it is tacked to the bowsprit like the jib.

Let's put it into perspective. Even though the genoa is a great sail for racing and cruising, sailors realized that it was too small to be used in a race or for downwind sail and this is the main reason why the spinnaker was invented. While the spinnakers are large sails that can be used for downwind sail, they are quite difficult to handle especially if you're sailing shorthanded. As such, this is how a gennaker came to be: it gives you the best of both worlds.

Gennakers are stable and easy to fly and will add to your enjoyment and downwind performance.

The Shape of a Gennaker

As we've just noted, the gennaker is asymmetrical. It doesn't attach to the forestay like the genoa but has a permanent fitting from the mast to bow. It is rigged exactly like a spinnaker but its tack is fastened to the bowsprit. This is fundamentally an essential sail if you're looking for something to bridge the gap between a genoa and a spinnaker.

Setting a Gennaker

When cruising, the gennaker is set with the tack line from the bow, a halyard, and a sheet that's led to the aft quarter. Attach the tack to a furling unit and attach it to a fitting on the hull near the very front of the sailboat. You can then attach the halyard that will help in pulling it up to the top of the mast before attaching it to the clew. The halyard can then run back to the winches to make the controlling of the sail shape easier, just like when using the genoa sail.

In essence, a gennaker is a superb sail that will give you the maximum versatility of achieving the best of both a genoa and a spinnaker, especially when sailing downwind. This is particularly of great importance if you're cruising by autopilot or at night.

Light Air Sails

Even though downwind sails can be used as light air sails, not all light air sails can be used for downwind sailing. In other words, there's a level of difference between downwind sails and light air sails. Light air sails include code zero, windseeker, and drifter reacher.

A cross between an asymmetrical spinnaker and a genoa, a code zero is a highly modern sail type that's generally used when sailing close to the wind in light air. Although the initial idea of code zero was to make a larger genoa, it settled on a narrow and flat spinnaker while upholding the shape of a genoa.

Modern boats come with code zero sails that can be used as soon as the sailboat bears off close-hauled even a little bit. It has a nearly straight luff and is designed to be very flat for close reaching. This sail is designed to give your boat extra performance in light winds, especially in boats that do not have overlapping genoas. It also mitigates the problem of loss of power when you are reaching with a non-overlapping headsail. Really, it is closer to a light air jib that sacrifices a little angle for speed.

In many conditions, a code zero sail can go as high as a sailboat with just a jib. By hoisting a code zero, you'll initially have to foot off about 15 degrees to fill it and get the power that you require to heel and move the boat. The boat will not only speed up but will also allow you to put the bow up while also doing the same course as before you set the zero. In essence, code zero can be an efficient way of giving your boat about 30% more speed and this is exactly why it's a vital inventory item in racing sailboats.

When it comes to furling code zero, the best way to do it is through a top-down furling system as this will ensure that you never get a twist in the system.

Generally used when a full size and heavier sail doesn't stay stable or pressurized, a windseeker is a very light sail that's designed for drifting conditions. This is exactly why they're designed with a forgiving cloth to allow them to handle these challenging conditions.

The windseeker should be tacked at the headstay with two sheets on the clew. To help this sail fill in the doldrums, you can heel the boat to whatever the apparent leeward side is and let gravity help you maintain a good sail shape while reaching.The ideal angle of a windseeker should be about 60 degrees.

Though only used in very specific conditions, the windseeker is so good at this one job that it is worth the investment if you plan on a long cruise. Still, you can substitute most off the breeze sails for this in a pinch, with slightly less performance gain, likely with more sacrifices in angle to the breeze. 

Drifter Reacher

Many cruising sailors often get intimidated by the idea of setting and trimming a drifter if it's attached to the rig at only three corners or if it's free-flying. But whether or not a drifter is appropriate for your boat will hugely depend on your boat's rig, as well as other specific details such as your crew's ability to furl and unfurl the drifter and, of course, your intended cruising grounds.

But even with that, the drifter remains a time-honored sail that's handy and very versatile. Unlike other light air sails, the drifter perfectly carries on all points of sails as it allows the boat to sail close-hauled and to tack. It is also very easy to control when it's set and struck. In simpler terms, a drifter is principally a genoa that's built of lightweight fabric such as nylon. Regardless of the material, the drifter is a superb sail if you want to sail off a lee shore without using the genoa.

Generally stronger than other regular sails, stormsails are designed to handle winds of over 45 knots and are great when sailing in stormy conditions. They include a storm jib and a trysail.

If you sail long and far enough, chances are you have or will soon be caught in stormy conditions. Under such conditions, storm jibs can be your insurance and you'll be better off if you have a storm jib that has the following features:

• Robustly constructed using heavyweight sailcloth
• Sized suitably for the boat
• Highly visible even in grey and white seas

That's not all; you should never go out there without a storm jib as this, together with the trysail, is the only sails that will be capable of weathering some of nature's most testing situations.

Storm jibs typically have high clews to give you the flexibility of sheet location. You can raise the sail with a spare halyard until its lead position is closed-hauled in the right position. In essence, storm jib is your insurance policy when out there sailing: you should always have it but always hope that you never have to use it.

Also known as a spencer, a trysail is a small, bright orange, veritably bullet-proof, and triangular sail that's designed to save the boat's mainsail from winds over 45 knots and works in the same way as a storm jib. It is designed to enable you to make progress to windward even in strong and stormy winds.

Trysails generally use the same mast track as the mainsail but you have to introduce the slides into the gate from the head of the trysail.

There are two main types of rigs: the fore-and-aft rig and the square rigg.

Fore-and-aft Rig

This is a sailing rig that chiefly has the sails set along the lines of the keel and not perpendicular to it. It can be divided into three categories: Bermuda rig, Gaff rig, and Lateen rig.

Bermuda Rig - Also known as a Marconi rig, this is the typical configuration of most modern sailboats. It has been used since the 17th century and remains one of the most efficient types of rigs. The rig revolves around setting a triangular sail aft of the mast with the head raised to the top of the mast. The luff should run down the mast and be attached to the entire length.

Gaff Rig - This is the most popular fore-and-aft rig on vessels such as the schooner and barquentine. It revolves around having the sail four-cornered and controlled at its peak. In other words, the head of the mainsail is guided by a gaff.

Lateen Rig - This is a triangular fore-and-aft rig whereby a triangular sail is configured on a long yard that's mounted at a given angle of the mast while running in a fore-and-aft direction. Lateen rig is commonly used in the Indian Ocean and the Mediterranean.

Square Rigged

This is a rig whereby the mainsails are arranged in a horizontal spar so that they're square or vertical to the mast and the keel of the boat. The square rig is highly efficient when sailing downwind and was once very popular with ocean-going sailboats.

Unquestionably, sailing is always pleasurable. Imagine turning off the engine of your boat, hoisting the sails, and filling them with air! This is, without a doubt, a priceless moment that will make your boat keel and jump forward!

But being propelled by the noiseless motion of the wind and against the mighty currents and pounding waves of the seas require that you know various sail types and how to use them not just in propelling your boat but also in ensuring that you enjoy sailing and stay safe. Sails are a gorgeous way of getting forward. They remain the main fascination of sailboats and sea cruising. If anything, sails and boats are inseparable and are your true friends when out there on the water. As such, getting to know different types of sails and how to use them properly is of great importance.

All in all, let's wish you calm seas, fine winds, and a sturdy mast!

Related Articles

I've personally had thousands of questions about sailing and sailboats over the years. As I learn and experience sailing, and the community, I share the answers that work and make sense to me, here on Life of Sailing.

by this author

Learn About Sailboats

Sailboat Parts

Most Recent

What Does "Sailing By The Lee" Mean?

October 3, 2023

The Best Sailing Schools And Programs: Reviews & Ratings

September 26, 2023

Important Legal Info

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

Similar Posts

Affordable Sailboats You Can Build at Home

September 13, 2023

Best Small Sailboat Ornaments

September 12, 2023

Discover the Magic of Hydrofoil Sailboats

December 11, 2023

Popular Posts

Best Liveaboard Catamaran Sailboats

December 28, 2023

Can a Novice Sail Around the World?

Elizabeth O'Malley

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England?

10 Best Sailboat Brands (And Why)

December 20, 2023

7 Best Places To Liveaboard A Sailboat

Get the best sailing content.

Top Rated Posts

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies. (866) 342-SAIL

© 2024 Life of Sailing Email: [email protected] Address: 11816 Inwood Rd #3024 Dallas, TX 75244 Disclaimer Privacy Policy

• Aug 14, 2023

A Breakdown of the Different Types of Sailboats and Their Uses

Updated: Jan 8

To the untrained eye, all sailboats are pretty much the same (some are just bigger than others). They’re essentially floating vessels with a mast, a set of sails, and the ability to navigate the waters by harnessing wind power. But if you dive a bit deeper, you’ll see there are drastic differences in the designs, capabilities, and uses of each type of sailboat.

Whether you’re new to sailboats or already an American Sailing Association (ASA) certified skipper, knowing the difference between the different types of vessels is essential. We’ll provide you with a basic understanding of the different types of sailboats, the advantages of each, and which type of voyage they’re best used for.

Sailboat Rigging Types

When you start sailing, one of the first things you’ll notice is how complicated the rigging seems. The rigging system includes ropes, furling jibs, booms, winches, cables, chains, masts, and much more. It takes time to identify and understand each one, but each type of sailboat has a distinct rigging system. A few of the main types of rigging you can expect to see on the water include:

Sloop: The sloop is arguably the most common rigging system. With one mast and two sails (mainsail & headsail), this type of rigging is simple, but efficient and prepared for all types of situations.

Cutter: If you squint, you could easily mistake a cutter for a slope, but there are slight differences. A cutter has a smaller headsail and an additional staysail between the mast and forestay of the vessel. The extra sail allows for more stability and control in heavy winds.

Ketch and Yawl: Both the ketch and yawl rigging types have two masts. However, what makes them different is in a ketch rigging, the aft mast (mizzen) is taller than the one on a yawl. Also, it’s positioned in front of the rudder post. These riggings are known for their excellent balance and flexibility in most conditions.

Schooner: If you have ever toured older wooden ships built to sail around the world and explore the ocean, then you have probably been aboard a Schooner. This configuration can have two or more masts and the aft mast is taller than the forward one(s). These vessels are powerful and equipped for the long haul.

Types of Sailboats and Their Uses

There are many types of sailboats (not to be confused with rigging types), each with its own pros, cons, and uses. Here’s a look at five of the most popular sailboats and why sailors use them.

When most people think of sailboats, they think of sailing dinghies. These small sailboats are less than 15-feet long and can be sailed by one person or a small crew. In most cases, they have small sloop rigs, are monohulls, and are excellent as a first sailboat. Dinghies are also great for racing or using as a lifeboat for bigger vessels.

Pros of a dinghy: Easily managed, relatively inexpensive, and great for beginners.

Cons of a dinghy: Not much space, only designed for short trips, and not recommended for rough waters or harsh weather conditions.

A daysailer is like the dinghy’s older brother. It’s usually about 14-20 feet in length and sloop-rigged. As the name suggests, they’re best for day trips on the ocean. In most cases, daysailers have a small cabin or open cockpit. They’re designed more for fun rather than long distances.

Pros of daysailers: Easy handling, stable, and great for outings with family or friends.

Cons of daysailers: Assmaller boats, they aren’t designed for overnight trips or long voyages.

The catamaran is where luxury on the sea begins. Its two parallel and equal-sized hulls make the vessel much more stable and comfortable than its single-hull counterparts. It’s a highly customizable boat that can be small and sporty or large and luxurious, depending on your needs.

More experienced sailors use these types of sailboats for longer trips and smaller charter trips .

Pros of the catamaran: A lot of space, fast, and perfect for cruising at sea.

Cons of the catamaran: Since they have such a wide beam, it can be a challenge to find places to dock or maneuver in tight marinas.

If you’re drawn to the size and stability of the catamaran, but yearn for more speed and power then you’ll love the trimaran. Instead of two hulls, this bigger boat has three: a main hull in the middle, and two smaller outrigger hulls on its sides. It’s an excellent sailboat for racing and cruising due to its stability and speed.

Pros of trimarans: Ability to be very fast, stable, and less likely to capsize in rough waters than smaller sailboats.

Cons of trimarans: They’re larger boats, so it can be difficult and more expensive to dock or store them in certain places.

Cruising Keelboat

Suppose you want to take an overnight cruise or even a trip across the Atlantic Ocean. In that case, a cruiser is your best bet. These large-sized sailboats (usually more than 30 feet long) are designed to be comfortable and self-sufficient, which makes them ideal for long voyages.

Pros of Cruising Keelboats: Well-suited to go on long-distance cruises for weeks or months with the ability to support multiple passengers.

Cons of Cruising Keelboats: You’ll not only have to invest in the sailboat (including storage and upkeep), but it also requires a large crew and an experienced captain.

Frequently Asked Questions (FAQs) About Sailboat Types

What is the most common type of sailboat.

Sloop-rigged sailboats (particularly daysailers and dinghies) are among the most popular types of sailboats. However, generally, the most commonly used sailboat depends on who’s using it. For example, a racer will have much different needs than someone who just wants the right boat for cruising.

What’s the difference between a sailboat and a yacht?

In the U.S., the determination between a sailboat and a yacht is that a sailboat only uses wind power, while a yacht can use wind, a motor, or a combination of both. However, internationally, sailboats and all other boats are usually considered “yachts.” Size can also be a determining factor. For example, some people consider any boat longer than 40 feet to be a yacht.

What’s the best beginner sailboat?

If you don’t have any sailing experience , the best sailboats are usually smaller, easy to maneuver, and less complicated than multihulls. Some of the best small sailboats for beginners have tiller steering and no winches.

This can include vessels like small dinghies, catamarans (though these are multihull boats), rotomolded boats, and those that can be easily trailered to different locations.

What is the safest type of sailboat?

In most cases, larger cruising keelboats are usually considered much safer than smaller dinghies and catamarans. That’s because they’re less likely to capsize and can handle adverse weather more safely, which is especially useful for new sailors. However, sailboat safety depends on the sailor, type of boat, and conditions.

What are the most popular sailboat brands?

There are countless high-quality sailboats on the market. Some of the most popular brands include Beneteau, Jeanneau, Hunter, Catalina, Dufour, Sunfish, Hobie, and many others. These brands have built a reputation of trust and reliability over the years, making them prime choices for new and seasoned sailors alike.

Which type of boat is best for offshore cruising?

If you want to take your sailboat for an offshore cruise, you’ll need something sturdy, reliable, and able to handle harsh sea conditions. In most cases, a cruising keelboat is your best bet for casual offshore cruising as they’re comfortable and self-sufficient vessels. In regards to rigging, ketch, cutter, and schooner rigs are best for sailing offshore because they are adaptable to varying wind speeds.

Learn How to Sail From The Experts

Are you interested in learning more about sailing or getting certified ? First Reef Sailing is one of the top ASA sailing schools in the Boston area.

We can help you learn the basics of sailing so you can get out on the water with confidence. Our certification courses, such as the beginner ASA 101 and ASA 103 courses, will teach you how to sail everything from 20-foot keelboats to 50-foot catamarans.

Take a look at this timeline of how many of our students learn, gain sailing experience, and go on to buy their own sailboats.

Recent Posts

(Article) Tenant Spotlight: First Reef Sailing

Take a look at a quick spotlight about the origins of First Reef Sailing, written by our friends at the Boston Harbor Shipyard and Marina. Read the article here

ASA 101 Overview: What to Expect From Basic Keelboat Sailing

The 9 Best Marine Navigation Apps of 2023

Comentários

The simplest entrance to the world of sailing

Types of Sailboats – The Ultimate Guide

There exist many different sailing boats types and they can be classified by various criteria. This blog post discusses the most common types of sailboats (both modern and traditional). Sailboats are classified by:

• the number of hulls
• construction material .

Types of Sailboats by Size

Sailboat division by size could be as follows:

• Sailing dinghies (small)
• Cruising sailboats (mid size)
• Tall ships (large).

Dinghies are small sailing boats, typically up to 6 meters long (approximately 20 feet). They are open (i.e. they don’t have a cabin) and most often don’t have an engine. Operated by a crew of one or two persons, they are used for shorter (day) sailings in coastal regions. There are many different types of sailing dinghies and they could be divided to traditional dinghies (typically made out of wood) or modern dinghies (typically made out of fiberglass ). Most modern dinghies are allowed to capsize (i.e. overturn) and recover as an integral part of their use.

Here are some of the most popular types of modern dinghies:

• Optimist – small single-handed dinghy for young people under the age of 15
• Laser – single-handed dinghy, an Olympic class since 1996
• 420 – 4.2 meters long double-handed dinghy used for racing and teaching
• 470 – 4.7 meters long double-handed dinghy, an Olympic class since 1976.

Remark: The term dinghy can also refer to any small boat carried by a larger boat in order to facilitate access to/from the shore.

Cruising Sailboats

Cruising sailboats are typically 6 to 20 meters long (approximately 20-60 feet), but can be even longer. They have cabins which allow for onboard sleeping and longer cruises that might last an arbitrary number of days. Also, they normally have either an outboard or an inboard engine which is used for leaving from and returning to the berth, as well as to provide propulsion when there is not enough wind. As opposed to sailing dinghies, cruising sailboats can be safely sailed during the night and are not intended for capsizing. Different cruising sailboat types are listed below by the rig type.

Remark: The term cruising sailboat is used for mid-sized sailboats, since nowadays sailing is practiced mainly for pleasure and sport, be it cruising or racing. However, it should be clear that mid-sized boats were historically used for work, trade or even military purposes.

Tall ships are large sailing boats, typically over 40 meters long (approximately 130 feet). They use traditional sails which are set on multiple masts (2 to 5). When talking about tall ships first thing that comes to mind might be old wooden ships that sailed the oceans from 15th to 19th century and were used for trade and military purposes. However, there also exist modern tall ships that are built from modern materials and are used for tourism (cruising) or training (navy cadets). For more information, check out Wikipedia’s Tall ship article.

Rig is the name for the arrangement of masts and sails on a boat. There are basically two main rig types:

• Fore-and-aft rig.

Square rig is a traditional rig typically used on tall ships. It is characterized by the sails being set perpendicular to the length of the boat (or transversely to the sailing direction). This type of rig is efficient when sailing downwind, but is unable to sail upwind (against the direction of the wind) or it performs poorly when attempting to do so. Today, square rig is used only on tall ships.

Fore-and-aft rig is characterized by the sails being set along the length of the boat (or longitudinally to the sailing direction). This type of rig is capable of sailing both upwind and downwind. All the modern sailboats (other than tall ships) are fore-and-aft rigged.

Some important fore-and-aft rig types are:

• Bermuda rig.

Lateen rig is a traditional rig type originating from the Mediterranean. It consists of a triangular sail hanging down from a spar (pole) which is hoisted on the mast at a certain angle. Lateen rig can still be seen today on smaller, wooden traditional boats. For instance, in certain places along the Croatian Adriatic coast, sailing regattas of traditional lateen-rigged boats are regularly organized.

Gaff rig is characterized by the four-sided mainsail which is hoisted along the mast and stretched between the two spars: upper one called the gaff and lower one called the boom. Gaff-rigged boats also carry a foresail called a jib. They may also carry a topsail which is hoisted above the gaff. Nowadays, gaff rig has been largely superseded by the newer Bermuda rig.

Bermuda Rig

Bermuda rig is by far the most popular type of rig on modern sailboats. It is characterized by the two triangular sails: mainsail and jib. Mainsail is hoisted along the mast and stretched along the boom (see our post: Parts of a Sailboat ). Some racing boats may carry a square top mainsail, but cruising sailboats will in most cases carry a triangular-like mainsail. Advantage of Bermuda rig over other rig types is sail efficiency and ease of sail handling. Bermuda rig is sometimes referred to as the Marconi rig.

Remark: There exist more fore-and-aft rigs, e.g. lug rig, gunter rig and others.

Cruising Sailboats by Rig Type

Cruising sailboats are fore-and-aft rigged boats with one or two masts. Older boats were mostly gaff-rigged and they might still be seen today, while modern and new build boats are almost exclusively Bermuda rigged. The most common single-masted cruising sailboat types are:

The most common two-masted cruising sailboat types are:

Single-masted

Sloop is a boat with a single mast. In this blog and in Your First Sailing Handbook the most widespread modern type of sailing boat is considered and that is a Bermuda rigged sloop.

Cutter is a boat with a single mast that normally sails with two or more foresails (jibs) simultaneously. It is more demanding for sailing than sloop, as there is one additional sail to handle. However, cutters offer some advantages (primarily for offshore sailing) as discussed in this Cutter or sloop rig? article. The term cutter might also refer to:

• a small, light sail- or oar-powered boat carried by a larger vessels
• a fast and agile official vessel used by the authorities to enforce law (e.g. US Coast Guard cutter)
• a fast boat from the 18th century carrying both fore-and-aft and square sails.

Ketch is a boat with two masts, the taller foremast (mainmast) and the shorter after mast (mizzen mast). Ketch is characterized by the rudder post being positioned abaft the mizzen mast.  

Yawl is a boat similar to a ketch, the difference being that the rudder post is positioned forward of the mizzen mast. Also, yawl’s mizzen mast is typically shorter than that of a ketch.

Schooner is a boat with two or more masts, where the foremast is no taller than the after masts. In case of a two-masted schooner, taller aftermast is called the mainmast.

Why Sloops are so Popular Nowadays

Cutters, ketches, yawls and schooners were once popular because they could have the same sail area as sloops with the individual sails being smaller and thus easier for handling. However, development of modern equipment made sail handling much easier irrespective of the sail size. This is one of the reasons why sloop has become the most widespread cruising sailboat type today. Another reason is that rigs with two masts are more expensive to build and maintain. Finally, sloops generally perform better when sailing upwind. For more information see the following post discussing two-masted sailboats .

.Modern sloops can be categorized to cruisers, racers  and performance cruisers. Cruising sloops sacrifice sailing performance for comfort, meaning that the interior is well equipped but heavy, while sail handling is easy but suboptimal in terms of sailing efficiency. On the other hand, racing sloops usually have bare interior (in order to reduce weight), but large cockpits to give the crew enough space to handle many different sails and work with many lines. Finally, performance cruisers usually offer a good trade-off between cruisers and racers, providing good comfort below the deck and decent sailing performance above the deck.

Types of Sailboats by the Number of Hulls

All the cruising sailboat types mentioned above are monohulls (they have one hull). However, sailboats may have more than one hull and they are called catamarans (in case of two hulls) or trimarans (in case of three hulls). Catamarans and trimarans are jointly called multihulls. Multihulls are typically single-masted and Bermuda-rigged, while being built from modern materials like fiberglass .

Dinghy catamarans are usually very agile and fun for sailing, but they require a skilled crew. Due to their low weight, they heel easily during sailing, resulting in one hull being raised above the water, which in turn reduces water resistance and allows the boat to sail faster.

On the other hand, majority of cruising catamarans are heavy and don’t heel much during sailing in normal conditions. They might not be as fun for sailing as monohulls, but they offer a lot of comfort since their interior is quite spacious. Compared to similarly equipped and sized monohulls, cruising catamarans have poorer performance upwind, but are usually faster downwind.

There also exist performance catamarans and trimarans which are built for speed and they are much faster than monohulls of similar size. Such boats are not widely available for chartering since they require a skilled crew.

Types of Sailboats by Construction Material

Main part of any boat is its hull and it can be constructed from different materials. Trade-off has to be made between strength and weight. Generally speaking, you want the sailboat to be strong and safe, while at the same time you want it to be light and fast. Main boat building materials are:

• Composite materials.

Traditionally, sailboats of all sizes were made out of wood and there is still a fair amount of wooden boats sailing today. Even though wood does not have favorable characteristics like modern composite materials, many owners prefer wooden boats for aesthetic and nostalgic reasons. Also, there are still new wooden sailboats being built either for private owners (often dinghies or smaller cruisers) or as a part of maritime heritage preservation projects. Wooden boats are very nice and appealing, especially if maintained properly, however that requires a lot of time and dedication.

Sailboat’s hull can also be constructed out of metal, most often steel and aluminum. Steel is very strong, but heavy, while aluminum is much lighter, but not as strong as steel. Precautions must be taken to prevent corrosion of both materials. Steel suffers from rusting, while aluminum suffers from galvanic corrosion.

Composite Materials

Vast majority of modern sailboats is made out of fiberglass, a composite material also known as glass-reinforced plastic or glass-fiber reinforced plastic. As the name suggests, this material is made from fine fibers of glass which are interwoven into fabrics and then reinforced with resin. Fiberglass is easily molded to form hulls and decks of different shapes. This allows fiberglass boats to be mass produced simply and cheaply, which is one of the reasons for their popularity. Fiberglass is very durable, so fiberglass boats have long life expectancy with relatively easy and simple maintenance. This is because fiberglass does not rot like wood, nor does it suffer from corrosion like steel and aluminum.

Modern high performance racing boats are typically made from carbon fibers which is a short name for carbon-fiber reinforced plastic. This technology is very similar to fiberglass, with the glass fibers being replaced by the carbon fibers. In comparison, carbon fiber technology offers much better strength-to-weight ratio, but it is also much more expensive than fiberglass. High price is the main reason hindering mass production of carbon cruising sailboats.

Vedran Bobanac

Vedran Bobanac has been sailing since the age of 10, while he has been working as a skipper and as a sailing instructor for almost 20 years now. He also holds PhD degree in electrical engineering and he enjoys using his technical knowledge, as well as pedagogical skills to teach sailing and publish sailing handbooks .

Types of Sailboats by Type of Rig

16 December 2015

To have a better idea of which types of sailboats would best suit your needs, your Allied Yachting broker can advise you on the various options available on the market for new or second-hand vessels as well as new construction. In the meantime, here is a summarized guide to the different categories of sailing yachts by type of rig , whether they are monohull (single hull) or multihull , as they’re called in the Mediterranean.

Sailboats by rig type: hulls, masts

Single masted sailboat with monohull

The most common monohull modern sailing yacht is the sloop, which features one mast and two sails, thus sloops are single-masted sailboats. If they have just two sails — a foresail and a headsail — then they’re a Bermudan sloop, the purest type of sailboat. This simple configuration is very efficient for sailing into the wind.

Sailing sloops with moderate rigs are probably the most popular of all cruising sailboats. Just a single-masted sailboat with two sails (a foresail or headsail, and a mainsail) and the minimum of rigging and sail control lines they are relatively simple to operate and less expensive than rigs with multiple masts.

Sloops are adapted for cruising as well as racing, depending on the height and size of their rig.

The cutter sailing yacht is also a monohull similar to a sloop with a single mast and mainsail but generally carries the mast further aft to allow for a jib and staysail to be attached to the head stay and inner forestay, respectively. Once a common racing configuration, today it gives versatility to cruising boats, especially in allowing a small staysail to be flown from the inner stay in high winds.

Thus, a cutter-rig sailboat has an additional sail (the staysail) set on its own stay between the foresail and the headsail.

Cutters are mostly adapted for cruising, but capable of good performance while racing as well.

A ketch is a two-masted sailboat, the main-mast forward and a shorter mizzen mast aft.

But not all two-masted sailboats are ketches — they might be yawls.

A ketch may also carry a staysail, with or without a bowsprit, in which case it would be known as a cutter-rigged ketch.

Ketches are also monohulls, but there is a second shorter mast astern of the mainmast, but forward of the rudder post. The second sailboat mast is called the mizzen mast and its sail is called the mizzen sail.

Yawls have their origins as old-time sail fishing boats, where the small mizzen sail was trimmed to keep the vessel steady when hauling the nets.

Similar to a ketch, the difference being that the yawl has the mizzen mast positioned aft of the rudder post whereas the ketch has its mizzen mast ahead of the rudder post.

Thus, a yawl is also a monohull, similar to a ketch, with a shorter mizzen mast carried astern the rudderpost more for balancing the helm than propulsion.

Schooners are generally the largest monohull sailing yachts.

Monohull two masts sailing boat

A schooner has a mainmast taller than its foremast, distinguishing it from a ketch or a yawl. A schooner can have more than two masts, with the foremast always lower than the foremost main. Traditional topsail schooners have topmasts allowing triangular topsails sails to be flown above their gaff sails; many modern schooners are Bermuda rigged.

A schooner is a two-(or more) masted sailboat, in which the aft-most mast – the mainmast – is the same height or taller than the foremast. Many sailors agree that of all the different types of sailboats, a schooner under full sail is one of the most beautiful sights afloat.

Gaffed-rigged sailboats, or “gaffers”, have their mainsail supported by a spar – the “gaff” – which is hauled up the mast by a separate halyard. Often these types of sailboats are rigged with a topsail. The gaff rig is no longer seen on modern production yachts.

A catamaran (‘cat’ for short) is a multihull yacht consisting of two parallel hulls of equal size.

A catamaran is geometry-stabilized, that is, it derives its stability from its wide beam, rather than having a ballasted keel like a monohull. Being ballast-free and lighter than a monohull, a catamaran can have a very shallow draught. The two hulls will be much finer than a monohull’s, allowing reduced drag and faster speeds in some conditions, although the high wetted surface area is detrimental in lower wind speeds, but allows much more accommodations, living and entertaining space in stability and comfort.

Two parallel hulls sailing catamaran

The speed and stability of these catamarans have made them a popular pleasure craft in Europe, most high-quality catamarans are built in France, but careful since their wide beams aren’t easy (or cheap) to berth in the French Riviera.

Racing catamarans technology has made them today’s leading racing sailboats of the world, like in the latest editions of America’s cup or other renowned transoceanic races.

Please surf through our website listings of sailing catamarans .

OTHER MULTIHULLS

Even harder to berth in the Mediterranean, and most commonly designed for around-the-globe racing rather than cruising, the trimarans have also been gaining some popularity in the western hemisphere, especially by naval designers with futuristic projects.

A trimaran is a multihull boat that comprises a main hull and two smaller outrigger hulls (or ‘floats’) which are attached to the main hull with lateral beams.

MOTORSAILER

A motorsailer or “motorsailor”, is a type of sailing vessel, typically a pleasure yacht, that derives propulsion from its sails and engine(s) in equal measure.

While the sailing yacht appeals primarily to the purist sailing enthusiast, the motorsailer is more suited for long-distance cruising, as a home for ‘live-aboard’ yachtsmen. The special features of the motorsailer (large engine, smaller sails, etc.) mean that, while it may not be the fastest boat under sail, the vessel is easily handled by a small crew. As such, it can be ideal for retired people who might not be entirely physically able to handle large sail areas. In heavy weather, the motorsailer’s large engine allows it to punch into a headwind when necessary to make landfall, without endless tacking to windward.

The Turkish word gulet is a loanword from the French goélette, meaning ‘schooner’.

A gulet is a traditional design of a two-masted (more common) or even three-masted wooden sailing vessel from the southwestern coast of Turkey, particularly built in the coastal towns of Bodrum and Marmaris; although similar vessels can be found all around the eastern Mediterranean. For considerations of crew economy, Diesel power is commonly used on these vessels, similar to a motorsailer. Today, this type of vessel, varying in size from 14 to 45 meters, is very popular and affordable for tourist charters in Turkey, the Aegean, Greece and up to Croatia in the Adriatic.

Please surf through our website listings of cruising sailing yachts by type of rig.

OUR YACHT LISTINGS:

• New Yachts for Sale
• Pre-owned Yachts for Sale
• Yachts for Charter

You might also like

Yachting Consultants

Sale-Charter-Brokerage-Management

Headquarters:

34 Rue Caffarelli 06000 Nice, France

Front Office:

Boulevard de La Croisette – Port Canto 06400 Cannes, France

T.: +33 493 43 82 83 Email: [email protected] Website: www.alliedyachting.com

• Articles and Guides

Types of Sailboats: Dive into the World of Sailboats

29th oct 2023 by samantha wilson.

Sailing is a wonderful hobby that can bring a lifetime of relaxation, adventure, and fun. It offers the chance to learn new skills, spend quality time with the whole family, to explore new destinations and take part in a whole host of different activities. There are many types of sailboats for sale, so before you venture down the road of buying your first sailboat , it’s important to understand the different types of sailboats and which one will be best for you and your family. With everything from tiny dinghies up to enormous superyachts , the range is huge.

Here we’ll explore the different sailboat types and uses, look at their pros and cons, and how to choose the right one.

Different Types of Sailing Boat by Hull

With so many different sailboat variations, sailboat uses and styles of sailboat, there are different ways we can identify them, and one way is by hull type. There are three categories; monohulls (with one hull), catamarans (with two hulls) and trimarans (with three hulls).

Monohull sailboats

Monohulls are the most common type of sailboat and are designed with a single hull, and have a long, narrow shape which makes them fast and easy to maneuver. Monohulls are typically designed for recreational sailing, and are great for long-distance cruising, coastal sailing, and racing. As they can be relatively inexpensive to buy and easy to maintain, monohulls are often one of the most popular types of sailing boats for beginners. As the broadest range of sailboats, monohulls come in all shapes and sizes, but can also have vastly different keel types. See our comparison between monohull and catamaran sailboats .

Examples of monohull keels include:

Full keel consists of heavy ballast which runs along the bottom of the hull and keeps the boat centered in the water

Cutaway keel

Cutway keep works in the same way as a full keel but has a section cut away to allow for better maneuverability in shallow waters

Fin keel or wing keel

These are often bolted on to the hull and can have a heavy bulb or wing at the bottom for additional stability

Swing keel, lifting keel, daggerboard or centerboard 

All of these are identified by their ability to be retracted into the hull, allowing for access to shallow water and additional speeds 

Shallow planing hull:

Usually found on types of small sailing boats and dinghies, it allows them to surf on waves and enter shallower water. 

Catamaran sailboats

Catamarans are two-hulled sailboats with a deck or trampoline in between that are typically wider and more stable than monohulls. They also provide more space and storage, and are great for sailing in shallow waters. Popular choices for those wanting to go fishing , cruising and racing, catamarans are gaining in popularity particularly because of their increased stability which is less likely to cause seasickness. Because of their lack of deep, heavy keels (not necessary because of their two-hulled stability) catamarans are known for their speeds and make for popular daysailers and charter boats. 

Trimaran sailboats

Trimarans are three-hulled sailboats that are usually faster and more stable than monohulls. They have a long, narrow shape, and they provide a good amount of space and storage. Trimarans are great for racing and long-distance cruising, and they are often used for fishing and recreational sailing. With a higher purchase price and less availability on the market, they are still fairly uncommon compared to monohulls and catamarans although larger trimaran yachts are gaining popularity thanks to their stability and speed. See our comparison guide between trimarans and catamarans .

Different Types of Sailing Boats

There are many ways to categorize sailboats, from their rigging to their mast configuration, their rudder type, hull type or by the different classes of sailboat. 

Another way to identify or categorize sailboat types is by their rigging. This refers to the configuration of the mast (or masts) and sail (or sails) and there are several types depending on what they’re used for.

These are some of the most common sailing yacht types:

Sloop are the most common type of sailboat on the water, and are characterized by a single-mast rig which frequently has a triangular mainsail and a headsail. They make for one of the most popular types of sailing boats for beginners as well as seasoned pros as they are easy to learn to control and maneuver, fun to sail and can be used for all types of sailing in different conditions. Sloops can get to great speeds with their rig configuration and offer good windward performance and as such they are popular racing boats as well as the perfect multi-purpose, easy maintenance leisure yacht. On the downside, sloops can be easier to capsize than some other sailboats and they require a tall mast to accommodate the two sails. 

While it might seem as though a cutter and sloop are barely distinguishable, a closer look shows that in fact the rigging is quite noticeably different. Yes, both types have a single mast, but a cutter has a two headsails, the additional one known as a staysail. This additional sail offers better control and more stability than a sloop and its singular jib sail, as well as being better at performing in adverse weather. The other difference worth noting is that many cutters have a spar extending from the bow, known as a bowsprit which increases the amount of sail area. The downsides to a cutter for some people is the rigging is more complex than that on a sloop. 

Schooners are probably the most easily identifiable type of sailboat to grace our seas. For centuries these multi-masted sailing yachts have transported sailors, soldiers, goods and passengers around the world, their multiple sails offering excellent offshore handling and the ability to withstand powerful sea conditions. They have a minimum of two masts, but can have many more, with two almost identical sized sails in the foresail and mainsail. Better suited to experienced sailors with a crew, they have a complex rigging with multiple sail options allowing for precise control offshore. 

Ketch and Yawl

Similar in appearance and handling, the ketch and yawl are characterized by their two masts, with the mainmast being taller than the mizzen mast. The two differ in that the ketch has the mizzen mast is forward of the rudder post, while the yawl has its mizzen aft of it. In general, ketch and yawl sailboats have shorter masts and smaller sails, making them slower than a sloop or cutter but more able to withstand rough sea conditions. Check our guide: Ketch vs Yawl

Daysailer and Dinghy

At the smaller end of the sailboat classification list are daysailers and dinghies. A dinghy tends to be under 28 feet in length and usually dual powered with a small outboard engine. Perfect for short cruises in protected water s they are great beginner yachts and easy to handle and rig. While usually slightly larger than a dinghy, the daysailer is, as the name suggests, perfect for short coastal cruising, have a single mast and can be either monohull or multihull. Both are a broad categorizations based on usage and size rather than shape or rigging. 

Racing Sailboats

The sport of racing sailboats dates back centuries and is today as popular as ever. There is no one type of racing sailboat, and the term in fact covers a broad spectrum of yachts, from one-man dinghies all the way to 100-foot yachts. In fact, any sailing yacht can be raced and there are many classes of sailboats and competitions around the world. Keel boats such as sloops and cutters are popular for racing, as they can sail quite close to the wind, but you’ll also find multihulls and the ultra-fast foiling hull boats which rise out of the water onto a narrow foil and can reach speeds well in excess of 50mph.   

Motorsailer Vs Sailboat

While many sailboats also have engines, the motorsailer is a different and easily identifiable style of yacht. It uses a combination of wind power and engine power, and in some cases resembles a motorboat in style more than a classic yacht shape. The motorsailer offers great opportunities for varying types of cruising such as coastal voyages, as well as living onboard, and is a reliable and easy-to-handle yacht popular with families.  On the downside, a motorsailer does tend to come with a higher price tag than sailboats of the same size and they aren’t usually as fast or efficient as a either a full powerboat or sailboat. 

Best Types of Sailboat by Activity

With so many variations, styles and types of sailboat on the market, it makes sense that they are designed for different activities and uses. Whether you want to sail around the world , enjoy a spot of day sailing or want something easy to handle, then you need to find the right kind of boat for your needs. 

Best sailboat for stability

When it comes to stability, the answer to which sailboat is best isn’t as clear cut as it might at first seem. The multihulls are the clear winners in temperate conditions, the trimaran taking first place thanks to its wide beam and triple hull configuration. A close second is the catamaran, also known for its lack of rolling, which is gaining popularity with those prone to seasickness who are looking for a yacht for day sailing or coastal cruising. 

However multihulls tend to be less stable when it comes to rougher sea conditions, and it’s impossible to right a capsized catamaran or trimaran. Monohulls with deep displacement hulls are by far the best choice in these instances, their design allowing them to keel far over in rough weather without capsizing. 

Best sailboat for Offshore Cruising

When adventure is calling and you want to head further offshore or embark on blue water cruises , then you need a yacht that is up to the challenge . The most important aspect of offshore cruising is experience and preparation, and there are many boats out there that can cross oceans if they’re properly equipped and handled. The simple rigged sloop, cutter or ketch are popular options. With easy handling qualities and good windward performance, a simple sloop is a good choice, while the cutter (similar in many ways) has even better rough weather performance qualities thanks to its additional headsail. The ketch, although slower, can be more stable in rough weather and has shorter and therefore stronger masts.

While it’s not a beginner’s sailboat, a classic schooner is probably the best sailboat for offshore cruising as it allows for precise handling even in big seas, as well as being fast and powerful. They have a deep displacement keel, which means they are more stable in rough weather too. 

Best sailboat for a day

More simple rigged sailboats tend to be the most popular day sailers, with the sloop, ketch, yawl and cutter top of the list. The idea of a simple rig makes using them coastally or in inland waters fun and fuss-free, and they make for great beginner boats . Likewise, on very protected waters such as lakes or coastal areas, smaller dinghies can great day boats too. 

Best budget sailboat

When it comes to budget, dinghies top the list of the cheapest sailboats. With or without an engine, they tend to be small and simple, without cabins, heads, instruments or other luxuries to add to the cost. Sloops, ketches and cutters too can be found on a budget, especially on the second hand market. But it’s important to look at more than the purchase price when buying a second hand boat, and consider the condition, repairs and maintenance that might need doing. Check out our guide Buying a Cheap Boat: Is it a Good Idea?

If you’re considering buying a sailboat then Rightboat.com has one of the biggest collections of new and used boats for sale in the world. From dinghies to sailing superyachts and everything in between we work with the best brokers in the business as well as private sellers offering you the biggest choice. 

Written By: Samantha Wilson

Samantha Wilson has spent her entire life on and around boats, from tiny sailing dinghies all the way up to superyachts. She writes for many boating and yachting publications, top charter agencies, and some of the largest travel businesses in the industry, combining her knowledge and passion of boating, travel and writing to create topical, useful and engaging content.

More from: Samantha Wilson

Related Articles and Guides

17th Jun 2024

Best Bay Boat Brands, the Most Popular Fishing Boats on the Market

2nd Jun 2024

Best Boat Binoculars: Which Features Make a Difference?

31st May 2024

Best Pontoon Boat Brands for Parties, Performance, Fishing, and Chilling Out

17th May 2024

Best Bass Boat Brands By Hull Construction, Affordability, and Size

• Explore Rightboat
• Boats for Sale
• Boating Articles
• Buyers Guide
• About RightBoat
• Sell Your Boat
• Boat Selling Advice
• All manufacturers
• All categories

Enter your email to keep up to date with the latest news

Join for free

Sign up now for free and discover how easy it is to keep up to date with THE latest boats for sale. Find your right boat, and tailor your voyage to finding your next boat.

Benefits of becoming a member:

• Set up tailored alerts
• Personalise your experience
• Download full specifications and broker details
• Keep tabs on your favourite boats

Are you a broker? Join as a Broker

Rightboat - join for free.

Do you have an account already? Login

Save this search

Save your search and receive new boats in your email..

You can unsubscribe from your alerts whenever you like. By pressing the button you accept the Legal Terms and conditions

All You Need to Know: Explaining the Different Types of Sailboats

Sailboats are a type of watercraft that are powered by the wind. They come in a variety of shapes and sizes, each with its unique characteristics and features. Understanding the different types of sailboats and their uses can be helpful for those who are interested in sailing or looking to purchase a sailboat.

Several factors determine the types of sailboats, including the hull type , keel type , mast configuration, and sails and rigging . The hull is the boat’s body and can be either a monohull, catamaran , or trimaran .

The keel is the underwater part of the hull that provides stability and can be either a fin keel, wing keel, bilge keel, daggerboard, or centerboard. The mast configuration and sails determine how the boat is powered, and can be a sloop, fractional rig sloop, ketch, schooner, yawl, cutter, or cat.

Types of Sailboats

Sailboats come in many different shapes and sizes, each designed for a specific purpose. Here are the most common types of sailboats:

Cruising Sailboats

Cruising sailboats are designed for long-distance sailing and living aboard. They typically have a spacious interior with a galley, head, and sleeping quarters. They also have a large fuel and water capacity to allow for extended time at sea. Cruising sailboats come in many different sizes, from small pocket cruisers to large bluewater yachts.

Racing Sailboats

Racing sailboats are designed for speed and agility. They typically have a lightweight hull and a tall mast with a large sail area. Racing sailboats come in many classes , from dinghies to large offshore racing yachts. They are designed to be sailed by a skilled crew and require a high level of skill and experience to handle.

Daysailers are designed for short trips and day sailing. They typically have a simple interior with minimal accommodations. Daysailers come in many different sizes, from small dinghies to larger keelboats. They are easy to handle and are a great choice for beginners or for those who want to enjoy a day on the water without the hassle of a larger boat.

Catamarans are sailboats with two hulls. They are designed for stability and speed and are often used for cruising or racing. Catamarans have a spacious interior and a large deck area, making them a popular choice for those who want to live aboard or entertain guests. They are also popular for chartering and can be found in many popular sailing destinations around the world.

Trimarans are sailboats with three hulls. They are designed for speed and stability and are often used for racing or long-distance cruising. Trimarans have a narrow hull and a large sail area, making them incredibly fast and agile on the water. They are also popular for their spacious interior and large deck area, making them a great choice for those who want to live aboard or entertain guests.

Sailboat Hull Types

When it comes to sailboats, there are two main categories of hull types: monohull and multihull. Each has its unique characteristics and advantages.

Monohull Sailboats

Monohull sailboats are the most common type of sailboat. They have a single hull, and the hull is typically long and narrow, which makes them more efficient when sailing upwind. Monohulls come in a variety of styles, including:

• Flat-bottom vessels
• Fin-keel racers
• Bulb and bilge keel cruisers
• Heavy semi-displacement sailboats
• Dense full-keel displacement cruisers

Each of these styles has its advantages and disadvantages. For example, flat-bottom vessels are the most stable, but they don’t work well in deep waters. Fin-keel racers are designed for speed and performance but may not be as comfortable for long-term cruising.

Multihull Sailboats

Multihull sailboats have two or more hulls. The most common types of multihulls are catamarans and trimarans. Multihulls have several advantages over monohulls, including:

• More stability
• Better performance in light winds

Catamarans have two hulls, which are connected by a deck. They are known for their stability and spaciousness. Trimarans have three hulls, which make them even more stable and faster than catamarans. However, they are not as spacious as catamarans.

Sailboat Rigging Types

When it comes to sailboat rigging types, there are several options to choose from. Each type of rig has its advantages and disadvantages, and choosing the right one will depend on a variety of factors, including the type of sailing you plan to do and the size of your boat . Some of the most common sailboat rigging types include:

The sloop rig is one of the most popular sailboat rigging types and is commonly used on boats ranging in size from small dinghies to large cruisers. It consists of a single mast with a mainsail and a jib or genoa. The mainsail is typically a triangular shape, while the jib or genoa is a smaller sail that is used to control the boat’s direction.

The cutter rig is similar to the sloop rig but with an additional headsail. This makes it a popular choice for sailors who want more control over their boat’s speed and direction. The mainsail is still triangular, but the headsail is typically smaller than the jib or genoa used in a sloop rig.

The ketch rig is a two-masted sailboat rigging type that is commonly used on larger boats. It consists of a main mast and a smaller mizzen mast located aft of the cockpit. The mainsail is typically triangular, while the mizzen sail is smaller and located behind the cockpit. The ketch rig is known for its versatility and is often used for long-distance cruising.

The yawl rig is similar to the ketch rig but with a smaller mizzen mast located further aft. This makes it a popular choice for sailors who want more control over their boat’s direction, especially in heavy winds. The yawl rig is also known for its ability to sail close to the wind, making it a popular choice for racing sailors.

Sailboat Sails

Several types of sails are commonly used on sailboats . Each sail has a specific purpose and is designed to work in different wind conditions. The main types of sails include mainsails, jibs, genoas, and spinnakers.

The mainsail is the largest sail on a sailboat and is typically located behind the mast. It is attached to the mast and boom and is used to capture the wind and propel the boat forward. The mainsail is the most important sail on the boat and is used in a wide range of wind conditions.

The mainsail can be adjusted in several ways to optimize its performance. The sail can be reefed, or reduced in size, to reduce the amount of sail exposed to the wind in high winds. The sail can also be twisted to adjust the shape of the sail and improve its performance in different wind conditions.

The jib is a smaller sail that is located in front of the mast. It is attached to the mast and forestay and is used to help balance the boat and improve its performance in light wind conditions. The jib is typically used in conjunction with the mainsail and can be adjusted to optimize its performance.

There are several types of jibs, including the working jib, the genoa jib, and the storm jib. The working jib is the most common type of jib and is used in moderate wind conditions. The genoa jib is a larger jib that is used in light wind conditions, while the storm jib is a smaller jib that is used in high wind conditions.

The genoa is a large jib that is used in light wind conditions. It is similar to the jib but is larger and overlaps the mainsail. The Genoa is attached to the mast and forestay and is used to capture as much wind as possible to propel the boat forward.

The Genoa is typically used in conjunction with the mainsail and can be adjusted to optimize its performance. It can be furled, or rolled up when not in use to reduce wind resistance and improve the boat’s performance.

The spinnaker is a large, balloon-shaped sail that is used for downwind sailing. It is typically used in light wind conditions and is attached to a spinnaker pole to keep it away from the boat’s mast and sails.

The spinnaker is used to capture as much wind as possible and propel the boat forward. It is typically used in conjunction with the mainsail and jib and can be adjusted to optimize its performance.

What factors determine the types of sailboats?

The factors that determine the types of sailboats include hull type, keel type, mast configuration, and sails and rigging.

What are the two main categories of sailboat hull types?

The two main categories of sailboat hull types are monohull and multihull.

What are some common sailboat rigging types?

Common sailboat rigging types include sloop rig, cutter rig, ketch rig, and yawl rig.

What are the main types of sails used on sailboats?

The main types of sails used on sailboats include mainsails, jibs, genoas, and spinnakers.

What are the differences between a catamaran and a trimaran?

A catamaran has two hulls connected by a deck, while a trimaran has three hulls. Trimarans are generally more stable and faster than catamarans, but they are not as spacious.

About the author

I worked as an officer in the deck department on various types of vessels, including oil and chemical tankers, LPG carriers, and even reefer and TSHD in the early years. Currently employed as Marine Surveyor carrying cargo, draft, bunker, and warranty survey.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Latest posts

What Happens if a Ship Loses Power?

A power outage is among the worst issues for maritime professionals. What happens if a ship loses power?

How Does Marine Fleet Management Work?

This guide discusses how marine fleet management works and the benefits and features of the ultimate marine fleet management solution.

Boat Cleaning 101: How Are Ships Cleaned?

Boat cleaning is an underrated part of maintaining a water vessel. The process and general cleaning practices can change depending on the vessel type.

• Pontoon Boats
• Personal Watercraft
• nauticalknowhow
• Nautical Knots
• Tools and Calculators

Types of Sailboats: Classification Guide

Sailboats can be divided into three basic types based on their hulls (catamaran, monohull or multihull) , their keel and their rigging, and then further subdivided from there. The result is that there are actually well over a dozen different kinds of sailboats out there.

Sailboat Hull Types

There are three main hull types that you’ll find in sailboats.

• Monohull: This is what most people think of when they think of a sail boat or any boat at all, really. A monohull sailboat has a single hulled structure that gives a boat that traditional boat shape we all instantly recognize. These are far and away the most common hull type for sailboats because they’re some of the oldest, they’re cheaper to produce, and they are fairly easy to maintain compared to the other options. You can do a lot more with the rigger in monohull sailboats and any sailing vessel with multiple masts is invariably going to be a monohull one. The downside of the monohull compared to the others is that they lack the stability.
• Catamaran: The second hull type you’ll find in sailboats is the catamaran . While technically a multihull vessel, they feature two hulls that are located on either side of the boat connected by a deck. Because it’s just the two, they get called catamarans rather than multihull which generally refers to three. Catamarans had been used by ancient peoples for years but never really caught on with “modern” boating for quite a long time. Now that we have fiberglass hulls and other advances, catamarans are much more commonplace than they were a  hundred years ago. Catamarans offer great speed and stability but don’t have as much cabin space as a monohull.
• Trimaran/Multihull : This hull style features three hulls in a similar style to the catamaran with the addition of that third center hull. From the side you wouldn’t be able to tell a catamarans from trimaran sailboats. These boats are even faster and more stable than a catamaran and, by extension, a monohull. They have a very low center of gravity and a large beam. Space is still a drawback but the third hull increases room overall. There are also vessels with even more hulls, but they are exceedingly rare and also pretty expensive.

Sailboat Keel Types

Heading below the hull now and we’ll find the keel, which is what gives your sailboat added stability in the water. While multihull boats find stability in the additional hulls, a monohull boat will get stability from its keel. Though it’s nearly impossible to flip or capsize a trimaran, if it does happen it’s staying flipped or capsized. However, the keel on a monohull boat makes it even harder to flip because of the physics of resistance in the water. That isn’t to say a monohulled boat with a keel is unsinkable, quite the opposite, but you’re just not going to flip one upside down without a real fight. There are six main keel types you’ll find in sailboats.

• Bilge Keel: These are dual keels that can be like fin keels or even full keels extending the length of the vessel. They extend from the sides and can prevent the boat from rolling. They need to be symmetrical on both sides of the boat to work.
• Bulb Kee l: These are a kind of fin keel but they carry ballast in them. That allows them to have a little more stability. They operate like a hydrofoil
• Centerboard Keel: This type of keel actually pivots and can be changed depending on the depth of the water.
• Daggerboard Keel : Another kind of centerboard keel but the daggerboard can actually be pulled up into the hull. This allows you to alter its position for an increase or decrease in speed or stability as needed.
• Fin Kee l: If you’re into racing you’ll probably have a fin keel. They are thin but extend deep below the sailboat. This makes them great for speed but not really ideal for a comfortable ride. You wouldn’t want to be day sailing for fun and relaxation with a fin keel.
• Full Keel: This is the most common type of keel and it spans the entire length of the vessel. There will likely be a rudder built into the keel as well.
• Wing Keel : This is a variant on the fin keel. Wing keels have a small wing at the tip to allow better directional stability by reducing cross flow.

Sailboat Mast Configuration

The mast of the sailboat is obviously that large pole onto which sails are rigged. Depending on your boat type you may have one mast, two masts, or more masts. How these masts are configured is where you can start distinguishing sailboat types you may recognize by name.  These include:

Sloop: This is arguably the most popular type of sailboat mast type. A sloop has a single mast and two sails – the headsail and the mainsail. Being a single masted sailboat makes them easy to identify. These are probably the easiest to learn how to rig and how to sail. It’s versatile enough for cruising and for racing. Commonly these a gaff rig or a Bermuda rig. Another kind of sloop rig is the fractional rig sloop in which you can find one of the sails below the top of the mast.

Schooner: These can have multiple masts, not just two. The largest sailing vessels you’re likely to see, either in the present or in images from history, were schooners. Giant ships with six masts each bearing over 10 sails were schooners. An important detail is that the first mast on a schooner will always be shorter than the others. They are usually gaff-rigged

Cutter: This type of sailboat is very similar to the sloop and has a centrally located mast supporting three sails. Two headsails, the second called a staysail, is what distinguishes it most easily from the sloop. The rigging makes a cutter a bit harder to manage than a sloop.

Ketch : A ketch is a lot like a schooner but the two masts are arranged differently. On a ketch, the main mast is taller than the aft mast which is called the mizzen mast. The mizzen sail naturally is on the mizzen mast with the mizzen mast positioned aft.

Catboat : Also called a cat, a catboat has a single mast and a large, single gaff sail. The boats are usually short, stout boats that aren’t built for speed or for open seas. Best to be used in coastal waters

Yawl: This vessel is nearly identical to the ketch with one main difference. In a yawl, the helm is forward of the mizzen mast, while that is not the case in a ketch.

Other Types of Sailboats

Now that we have the basic configurations out of the way, let’s look at some of the more specific types of sailboats you may find at sea. In some cases you’ll see that these terms are not entirely specific and one term may actually apply to multiple kinds of sail boats in much the same way that something like SUV can describe multiple different vehicles that are similar but not all the same.

Sailing Dinghies

Like any dinghy, a sailing dinghy is going to be a small vessel. Typically made to accommodate just one or two people, they are under 15 feet and the smallest of which are often used by children. Optimist dinghies are raced professionally and must meet certain requirements to be officially registered as true Optimist boats. If you’re totally new to sailing, a sailing dinghy might be a good place to learn the ropes.

Daysailer generally refers to any sailboat that is not intended to either race other boats or keep you out on the water for an overnight stay. As such, it can cover a lot of ground. Typically, a daysailer will probably be between 14 feet and 20 feet. Usually you won’t get more than 4 people on board and there will be room for storing gear but not a sleeping berth. These are great beginner sailboats.

Pocket Cruisers

Like a daysailer, a pocket cruiser is more of a general label for boats rather than a specific kind. In this case, any sailboat under 30 feet could technically be considered a pocket cruiser. Basically it should be trailerable and used for either cruising or racing. They may contain a small cabin or berth. They could be outfitted for long offshore trips.

Trailer Sailer

Very similar to a pocket cruiser, a trailer sailer is a smaller vessel but still larger than a sailing dinghy. There is clear overlap between trailer sailers, daysailers, and pocket cruisers and the same name could technically be used for many different boats. The defining characteristic of a trailer sailer is that it can easily be transported by trailer behind your tow vehicle. Unlike a sailing dinghy, a trailer sailer would likely have a retractable keep like a centerboard or daggerboard.

Racing Sailboats

These boats can be very large, anywhere from 20 feet to over 70 feet, and they are designed to be light and fast on the water. Larger racing sailboats required a skilled crew to operate. These have keels intended to increase speed and even laminate sales to improve performance. Smaller racing boats can be manned by just one or two people. They don’t offer a lot of creature comforts and aren’t meant for relaxing trips at sea.

Beach Catamarans

Beach cats get their name from the fact they’re designed to be beached and can be launched again from the beach if you so desire. They are usually under 25 feet and not meant for extending sailing offshore, rather they are designed for daysailing. They are very agile and fast and take a good foundation of knowledge to control properly.

Cruising Catamarans

This is the larger style of catamaran designed for more serious boating. Like any catamaran they have a shallow draft but these can be between 25 feet and up to more than 50 feet. They’re designed for extended cruising offshore.

Cruising Sailboats

Boats like schooners quality as a cruising boat and they are typically at least 16 feet in length but may get well over 50 feet as well. Cruising sailboats include cabins for extended stays offshore and, if the boat is large enough, will likely have a fairly large living space below deck which includes a galley and a head in addition to sleeping berths. These are often called liveaboard sailboats .

Cruisers are often monohull but can just as easily be multihull. When properly outfitted they can be used for long, extended stays at sea that last weeks or more. Depending on rigging a cruising sailboat could easily be a sloop, a schooner, a cutter, a ketch or even a superyacht.

Racing Cruisers

This is essentially a hybrid of the cruising sailboat and the racing sailboat. It’s built for more speed than a cruiser but it will have better accommodations than a racing sailboat to allow for stays at sea.  The end result is a lighter cruiser ideal for a few days at sea that can get some good speed.

Bluewater Cruising Boats

These are basically the next step up from a cruising sailboat. A bluewater cruiser is meant to sail across oceans, which is where the bluewater part of the name comes from. These are large sailboats and are best only sailed by skilled sailors. They can be outfitted for very long stays at sea and are able to handle rough weather better than smaller vessels.

Motorsailers

You don’t hear this term much anymore but it refers to a sailboat that also has an inboard motor so that they can travel under engine power or wind power. Typically these are larger vessels with accommodations below deck and designed for extended stays off shore. That said, because they mix both styles of boat, they fall somewhere short of either in terms of performance. The engine takes up space and adds weight, limiting your sailing abilities. Obviously traditional sailboats won’t include a motor.

The Bottom Line

There are a number of different kinds of sailboats and the easiest way to distinguish them is by comparing hull types, sail and mast configuration, and keels. Many terms you hear to describe sailboats can describe more than one kind, while others are very specific and the boat must meet certain requirements to merit the name. The only thing that truly unites every type of sailboat is the fact it must be powered by the wind, and even then there are hybrid versions that use motor power sometimes.

Learning the rigging of the different types of sailboats, including things like gaff rigs, standard rigging, and other rig types can be hard work and time consuming as some of these sailing boat rig types are far more complex than others.

My grandfather first took me fishing when I was too young to actually hold up a rod on my own. As an avid camper, hiker, and nature enthusiast I'm always looking for a new adventure.

Categories : Boats

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

More in Boats

What Is A Gunwale?

131 of the Best Hawaiian Boat Names

167 Patriotic Boat Names

The 138 Best Boat Names for Dog Lovers

The People’s Poncho Review and Ratings 

Oru Lake Kayak Review

About Boatsafe

Established in 1998, BoatSafe is your independent guide into the world of boating, fishing, and watersports. We provide expert insights and detailed guides to help you find products tailored to your needs and budget.

Contact Boatsafe

• Address: 4021 West Walnut Street. Rogers, AR 72756
• Phone:  (479)339-4795
• Email: [email protected]

Site Navigation

• How We Test
• Corrections Policy
• Privacy Policy
• Terms & Conditions
• Editorial Policy
• Affiliate Disclosure

Our Reviews

All content is © Copyright 2024. All rights reserved.

Guide to Understanding Sail Rig Types (with Pictures)

There are a lot of different sail rig types and it can be difficult to remember what's what. So I've come up with a system. Let me explain it in this article.

What are the different types of sail rig? The sail rig is determined by the number of masts and the layout and shape of sails. Most modern ships are fore-and-aft rigged, while old ships are square-rigged. Rigs with one mast are sloops and cutters. Ketches, yawls, brigs, and schooners have two masts. Barques have three masts. Rigs can contain up to seven masts.

'Yeah, that's a gaff brig, and that a Bermuda cutter' - If you don't know what this means (neither did I) and want to know what to call a two-masted ship with a square-rigged mainsail, this article is definitely for you.

On this page:

More info on sail rig types, mast configurations and rig types, rigs with one mast, rigs with two masts, rigs with three masts, related questions.

This article is part 2 of my series on sails and rig types. Part 1 is all about the different types of sails. If you want to know everything there is to know about sails once and for all, I really recommend you read it. It gives a good overview of sail types and is easy to understand.

The Ultimate Guide to Sail Types and Rigs (with Pictures)

First of all, what is a sail rig? A sail rig is the way in which the sails are attached to the mast(s). In other words, it's the setup or configuration of the sailboat. The rig consists of the sail and mast hardware. The sail rig and sail type are both part of the sail plan. We usually use the sail rig type to refer to the type of boat.

Let's start by taking a look at the most commonly used modern sail rigs. Don't worry if you don't exactly understand what's going on. At the end of this article, you'll understand everything about rig types.

The sail rig and sail plan are often used interchangeably. When we talk of the sail rig we usually mean the sail plan . Although they are not quite the same. A sail plan is the set of drawings by the naval architect that shows the different combinations of sails and how they are set up for different weather conditions. For example a light air sail plan, storm sail plan, and the working sail plan (which is used most of the time).

So let's take a look at the three things that make up the sail plan.

The 3 things that make up the sail plan

I want to do a quick recap of my previous article. A sail plan is made up of:

• Mast configuration - refers to the number of masts and where they are placed
• Sail type - refers to the sail shape and functionality
• Rig type - refers to the way these sails are set up on your boat

I'll explore the most common rig types in detail later in this post. I've also added pictures to learn to recognize them more easily. ( Click here to skip to the section with pictures ).

How to recognize the sail plan?

So how do you know what kind of boat you're dealing with? If you want to determine what the rig type of a boat is, you need to look at these three things:

• Check the number of masts, and how they are set up.
• You look at the type of sails used (the shape of the sails, how many there are, and what functionality they have).
• And you have to determine the rig type, which means the way the sails are set up.

Below I'll explain each of these factors in more detail.

The most common rig types on sailboats

To give you an idea of the most-used sail rigs, I'll quickly summarize some sail plans below and mention the three things that make up their sail plan.

• Bermuda sloop - one mast, one mainsail, one headsail, fore-and-aft rigged
• Gaff cutter - one mast, one mainsail, two staysails, fore-and-aft rigged
• Gaff schooner - two-masted (foremast), two mainsails, staysails, fore-and-aft rigged
• Gaff ketch - two-masted (mizzen), two mainsails, staysails, fore-and-aft rigged
• Full-rigged ship or tall ship - three or more masts, mainsail on each mast, staysails, square-rigged

The first word is the shape and rigging of the mainsail. So this is the way the sail is attached to the mast. I'll go into this later on. The second word refers to the mast setup and amount of sails used.

Most sailboats are Bermuda sloops. Gaff-rigged sails are mostly found on older, classic boats. Square-rigged sails are generally not used anymore.

But first I want to discuss the three factors that make up the sail plan in more detail.

Ways to rig sails

There are basically two ways to rig sails:

• From side to side, called Square-rigged sails - the classic pirate sails
• From front to back, called Fore-and-aft rigged sails - the modern sail rig

Almost all boats are fore-and-aft rigged nowadays.

Square sails are good for running downwind, but they're pretty useless when you're on an upwind tack. These sails were used on Viking longships, for example. Their boats were quicker downwind than the boats with fore-and-aft rigged sails, but they didn't handle as well.

The Arabs first used fore-and-aft rigged sails, making them quicker in difficult wind conditions.

Quick recap from part 1: the reason most boats are fore-and-aft rigged today is the increased maneuverability of this configuration. A square-rigged ship is only good for downwind runs, but a fore-and-aft rigged ship can sail close to the wind, using the lift to move forward.

The way the sails are attached to the mast determines the shape of the sail. The square-rigged sails are always attached the same way to the mast. The fore-and-aft rig, however, has a lot of variations.

The three main sail rigs are:

• Bermuda rig - most used - has a three-sided (triangular) mainsail
• Gaff rig - has a four-sided mainsail, the head of the mainsail is guided by a gaff
• Lateen rig - has a three-sided (triangular) mainsail on a long yard

The Bermuda is the most used, the gaff is a bit old-fashioned, and the lateen rig is outdated (about a thousand years). Lateen rigs were used by the Moors. The Bermuda rig is actually based on the Lateen rig (the Dutch got inspired by the Moors).

Other rig types that are not very common anymore are:

• Junk rig - has horizontal battens to control the sail
• Settee rig - Lateen with the front corner cut off
• Crabclaw rig

Mast configuration

Okay, we know the shape of the mainsail. Now it's time to take a look at the mast configuration. The first thing is the number of masts:

• one-masted boats
• two-masted boats
• three-masted boats
• four masts or up
• full or ship-rigged boats - also called 'ships' or 'tall ships'

I've briefly mentioned the one and two mast configurations in part 1 of this article. In this part, I'll also go over the three-masted configurations, and the tall ships as well.

A boat with one mast has a straightforward configuration because there's just one mast. You can choose to carry more sails or less, but that's about it.

A boat with two masts or more gets interesting. When you add a mast, it means you have to decide where to put the extra mast: in front, or in back of the mainmast. You can also choose whether or not the extra mast will carry an extra mainsail. The placement and size of the extra mast are important in determining what kind of boat we're dealing with. So you start by locating the largest mast, which is always the mainmast.

From front to back: the first mast is called the foremast. The middle mast is called the mainmast. And the rear mast is called the mizzenmast.

What is the mizzenmast? The mizzenmast is the aft-most (rear) mast on a sailboat with three or more masts or the mast behind the mainmast on a boat with two masts. The mizzenmast carries the mizzen sail. On a two-masted boat, the mizzenmast is always (slightly) smaller than the mainmast. What is the purpose of the mizzen sail? The mizzen sail provides more sail area and flexibility in sail plan. It can be used as a big wind rudder, helping the sailor to have more control over the stern of the ship. It pushes the stern away from the wind and forces the bow in the opposite way. This may help to bring the bow into the wind when at anchor.

I always look at the number of masts first, because this is the easiest to spot. So to make this stuff more easy to understand, I've divided up the rig types based on the number of masts below.

Why would you want more masts and sail anyways?

Good question. The biggest advantage of two masts compared to one (let's say a ketch compared to a sloop), is that it allows you to use multiple smaller sails to get the same sail area. It also allows for shorter masts.

This means you reduce the stress on the rigging and the masts, which makes the ketch rig safer and less prone to wear and tear. It also doesn't capsize as quickly. So there are a couple of real advantages of a ketch rig over a sloop rig.

In the case of one mast, we look at the number of sails it carries.

Boats with one mast can have either one sail, two sails, or three or more sails.

Most single-masted boats are sloops, which means one mast with two sails (mainsail + headsail). The extra sail increases maneuverability. The mainsail gives you control over the stern, while the headsail gives you control over the bow.

Sailor tip: you steer a boat using its sails, not using its rudder.

The one-masted rigs are:

• Cat - one mast, one sail
• Sloop - one mast, two sails
• Cutter - one mast, three or more sails

The cat is the simplest sail plan and has one mast with one sail. It's easy to handle alone, so it's very popular as a fishing boat. Most (very) small sailboats are catboats, like the Sunfish, and many Laser varieties. But it has a limited sail area and doesn't give you the control and options you have with more sails.

The most common sail plan is the sloop. It has one mast and two sails: the main and headsail. Most sloops have a Bermuda mainsail. It's one of the best racing rigs because it's able to sail very close to the wind (also called 'weatherly'). It's one of the fastest rig types for upwind sailing.

It's a simple sail plan that allows for high performance, and you can sail it short-handed. That's why most sailboats you see today are (Bermuda) sloops.

This rig is also called the Marconi rig, and it was developed by a Dutch Bermudian (or a Bermudian Dutchman) - someone from Holland who lived on Bermuda.

A cutter has three or more sails. Usually, the sail plan looks a lot like the sloop, but it has three headsails instead of one. Naval cutters can carry up to 6 sails.

Cutters have larger sail area, so they are better in light air. The partition of the sail area into more smaller sails give you more control in heavier winds as well. Cutters are considered better for bluewater sailing than sloops (although sloops will do fine also). But the additional sails just give you a bit more to play with.

Two-masted boats can have an extra mast in front or behind the mainmast. If the extra mast is behind (aft of) the mainmast, it's called a mizzenmast . If it's in front of the mainmast, it's called a foremast .

If you look at a boat with two masts and it has a foremast, it's most likely either a schooner or a brig. It's easy to recognize a foremast: the foremast is smaller than the aft mast.

If the aft mast is smaller than the front mast, it is a sail plan with a mizzenmast. That means the extra mast has been placed at the back of the boat. In this case, the front mast isn't the foremast, but the mainmast. Boats with two masts that have a mizzenmast are most likely a yawl or ketch.

The two-masted rigs are:

• Lugger - two masts (mizzen), with lugsail (a cross between gaff rig and lateen rig) on both masts
• Yawl - two masts (mizzen), fore-and-aft rigged on both masts. Main mast is much taller than mizzen. Mizzen without a mainsail.
• Ketch - two masts (mizzen), fore-and-aft rigged on both masts. Main mast with only slightly smaller mizzen. Mizzen has mainsail.
• Schooner - two masts (foremast), generally gaff rig on both masts. Main mast with only slightly smaller foremast. Sometimes build with three masts, up to seven in the age of sail.
• Bilander - two masts (foremast). Has a lateen-rigged mainsail and square-rigged sails on the foremast and topsails.
• Brig - two masts (foremast), partially square-rigged. The main mast carries small lateen-rigged sail.

The yawl has two masts that are fore-and-aft rigged and a mizzenmast. The mizzenmast is much shorter than the mainmast, and it doesn't carry a mainsail. The mizzenmast is located aft of the rudder and is mainly used to increase helm balance.

A ketch has two masts that are fore-and-aft rigged. The extra mast is a mizzenmast. It's nearly as tall as the mainmast and carries a mainsail. Usually, the mainsails of the ketch are gaff-rigged, but there are Bermuda-rigged ketches too. The mizzenmast is located in front of the rudder instead of aft, as on the yawl.

The function of the ketch's mizzen sail is different from that of the yawl. It's actually used to drive the boat forward, and the mizzen sail, together with the headsail, are sufficient to sail the ketch. The mizzen sail on a yawl can't really drive the boat forward.

Schooners have two masts that are fore-and-aft rigged. The extra mast is a foremast which is generally smaller than the mainmast, but it does carry a mainsail. Schooners are also built with a lot more masts, up to seven (not anymore). The schooner's mainsails are generally gaff-rigged.

The schooner is easy to sail but not very fast. It handles easier than a sloop, except for upwind, and it's only because of better technology that sloops are now more popular than the schooner.

The brig has two masts. The foremast is always square-rigged. The mainmast can be square-rigged or is partially square-rigged. Some brigs carry a lateen mainsail on the mainmast, with square-rigged topsails.

Some variations on the brig are:

Brigantine - two masts (foremast), partially square-rigged. Mainmast carries no square-rigged mainsail.

Hermaphrodite brig - also called half brig or schooner brig. Has two masts (foremast), partially square-rigged. Mainmast carries a gaff rig mainsail and topsail, making it half schooner.

Three-masted boats are mostly barques or schooners. Sometimes sail plans with two masts are used with more masts.

The three-masted rigs are:

• Barque - three masts, fore, and mainmast are square-rigged, the mizzenmast is usually gaff-rigged. All masts carry mainsail.
• Barquentine - three masts, foremast is square-rigged, the main and mizzenmast are fore-and-aft rigged. Also called the schooner barque.
• Polacca - three masts, foremast is square-rigged, the main and mizzenmast are lateen-rigged.
• Xebec - three masts, all masts are lateen-rigged.

A barque has three or four masts. The fore and mainmast are square-rigged, and the mizzen fore-and-aft, usually gaff-rigged. Carries a mainsail on each mast, but the mainsail shape differs per mast (square or gaff). Barques were built with up to five masts. Four-masted barques were quite common.

Barques were a good alternative to full-rigged ships because they require a lot fewer sailors. But they were also slower. Very popular rig for ocean crossings, so a great rig for merchants who travel long distances and don't want 30 - 50 sailors to run their ship.

Barquentine

The barquentine usually has three masts. The foremast is square-rigged and the main and mizzenmast fore-and-aft. The rear masts are usually gaff-rigged.

Faster than a barque or a schooner, but the performance is worse than both.

The polacca or polacre rig has three masts with a square-rigged foremast. The main and mizzenmast are lateen-rigged. Beautiful boat to see. Polacca literally means 'Polish' (it's Italian). It was a popular rig type in the Mediterranean in the 17th century. It looks like the xebec, which has three lateen-rigged masts.

Fun fact: polaccas were used by a Dutch sailor-turned-Turkish-pirate (called Murat Reis).

The xebec is a Mediterranean trading ship with three masts. All masts are lateen-rigged. I couldn't find any surviving xebecs, only models and paintings. So I guess this rig is outdated a long time.

A boat with three or more masts that all carry square-rigged sails is called a ship, a tall ship, or a full-rigged ship. So it's at this point that we start calling boats 'ships'. It has nothing to do with size but with the type of rigging.

More sails mean less stress on all of them. These ships use a lot of sails to distribute the forces, which reduces the stress on the rigging and the masts. Square sails mean double the sail area in comparison to triangular sails.

They are quite fast for their size, and they could outrun most sloops and schooners (schooners were relatively a lot heavier). The reason is that tall ships could be a lot longer than sloops, giving them a lot of extra hull speed. Sloops couldn't be as large because there weren't strong enough materials available. Try making a single triangular sail with a sail area of over 500 sq. ft. from linen.

So a lot of smaller sails made sense. You could have a large ship with a good maximum hull speed, without your sails ripping apart with every gust of wind.

But you need A LOT of sailors to sail a tall ship: about 30 sailors in total to ie. reef down sails and operate the ship. That's really a lot.

Tall ships are used nowadays for racing, with the popular tall ship races traveling the world. Every four years I go and check them out when they are at Harlingen (which is very close to where I live).

Check out the amazing ships in this video of the tall ship races last year near my hometown. (The event was organized by friends of mine).

What is the difference between a schooner and a sloop? A schooner has two masts, whereas the sloop only has one. The schooner carries more sails, with a mainsail on both masts. Also, sloops are usually Bermuda-rigged, whereas schooners are usually gaff-rigged. Most schooners also carry one or two additional headsails, in contrast to the single jib of the sloop.

What do you call a two-masted sailboat? A two-masted sailboat is most likely a yawl, ketch, schooner, or brig. To determine which one it is you have to locate the mainmast (the tallest). At the rear: schooner or brig. In front: yawl or ketch. Brigs have a square-rigged foremast, schooners don't. Ketches carry a mainsail on the rear mast; yawls don't.

What is a sloop rig? A sloop rig is a sailboat with one mast and two sails: a mainsail and headsail. It's a simple sail plan that handles well and offers good upwind performance. The sloop rig can be sailed shorthanded and is able to sail very close to the wind, making it very popular. Most recreational sailboats use a sloop rig.

What is the difference between a ketch and a yawl? The most important difference between a ketch and a yawl are the position and height of the mizzenmast. The mizzenmast on a yawl is located aft of the rudder, is shorter than the mainmast and doesn't carry a mainsail. On a ketch, it's nearly as long as the mainmast and carries a mainsail.

There are a wonderful lots of DIY changeability shows on the cable airwaves these days.

Rick the rigger

There are SO many errors on this site it really should be taken down.

First major mistake is to say you are no longer afraid of the sea.

One that truly gets up my nose is the term ‘fully’ rigged ship. It’s a FULL rigged ship!! Your mast names are the wrong way round and just because there may be 3 it doesn’t automatically mean the one in the middle is the main.

I could go on and totally destroy your over inflated but fragile ego but I won’t. All I will say is go learn a lot more before posting.

Shawn Buckles

Thanks for your feedback. If you like to point out anything more specific, please let me know and I will update the articles. I’ve changed fully-rigged to full-rigged ship - which is a typo on my part. I try to be as concise as I can, but, obviously, we all make mistakes every now and then. The great thing about the internet is that we can learn from each other and update our knowledge together.

If you want to write yourself and share your knowledge, please consider applying as a writer for my blog by clicking on the top banner.

Thanks, Shawn

Well, I feel that I’ve learned a bit from this. The information is clear and well laid out. Is it accurate? I can’t see anything at odds with the little I knew before, except that I understood a xebec has a square rigged centre mainmast, such as the Pelican ( https://www.adventureundersail.com/ )

Hi, Shawn, You forgot (failed) to mention another type of rig? The oldest type of rig known and still functions today JUNK RIG!

Why are so many of the comments here negative. I think it is wonderful to share knowledge and learn together. I knew a little about the subject (I’m an Aubrey-Maturin fan!) but still found this clarified some things for me. I can’t comment therefore on the accuracy of the article, but it seems clear to me that the spirit of the author is positive. We owe you some more bonhomme I suggest Shawn.

As they say in the Navy: “BZ” - for a good article.

Been reading S.M. Stirling and wanted to understand the ship types he references. Thank you, very helpful.

This site is an awesome starting point for anyone who would like to get an overview of the subject. I am gratefull to Shawn for sharing - Thanks & Kudos to you! If the negative reviewers want to get a deeper technical knowledge that is accurate to the n-th then go study the appropriate material. Contribute rather than destroy another’s good work. Well done Shawn. Great job!

Good stuff Shawn - very helpful. As a novice, it’s too confusing to figure out in bits and pieces. Thanks for laying it out.

First of all I have to say that Rick ‘the rigger’ is obviously the one with the “over inflated but fragile ego” and I laughed when you suggested he share his knowledge on your blog, well played!

As for the content it’s great, hope to read more soon!

Alec Lowenthal

Shawn, I have a painting of a Spanish vessel, two masted, with. Lateen sails on both masts and a jib. The mainsail is ahead of the main mast (fore) and the other is aft of the mizzen mast. Would this be what you call lugger rig? I have not seen a similar picture. Thanks, Alec.

Thank you for your article I found easy to read and understand, and more importantly remember, which emphasises the well written.. Pity about the negative comments, but love your proactive responses!

This vessel, “SEBASTIAN” out of Garrucha, Almería, España, was painted by Gustave Gillman in 1899.

Sorry, picture not accepted!

Thank you for a very informative article. I sail a bit and am always looking for more knowledge. I like the way you put forth your info and I feel if you can’t say anything positive, then that person should have their own blog or keep their opinions to their-self. I will be looking for more from you. I salute your way of dealing with negative comments.

Thank you for a great intro to sailing boats! I searched different sailboats because I use old sails tp make bags and wanted to learn the difference. Way more than I ever expected. Thanks for all the work put in to teach the rest of us.

Your description of a cutter is lacking, and your illustrations of “cutters” are actually cutter-rigged sloops. On a true cutter, the mast is moved further aft (with more than 40% of the ship forward of the mast). A sloop uses tension in the backstay to tension the luff of the foresail. The cutter can’t do this.

Also, a bermuda-rigged ketch will have a line running from the top of the mainmast to the top of the mizzenmast.

wow great guide to rig types! thanks

Interesting guide, however I am confused about the description of the brig. You say the main mast on a brig can have a lateen sail, but in your picture it looks like a gaff sail to me. How is it a lateen sail?

Hi Shawn, thank you for taking the time to share this information. It is clear and very helpful. I am new to sailing and thinking of buying my own blue water yacht. The information you have supplied is very useful. I still am seeking more information on performance and safety. Please keep up the good work. Best Regards

mickey fanelli

I’m starting to repair a model sailboat used in the lake I have three masts that have long been broken off and the sails need replacement. So my question is there a special relationship between the three masts I do have reminents of where the masts should go. they all broke off the boat along with the sails I can figure out where they go because of the old glue marks but it makes no sense. or does it really matter on a model thank you mickey

Cool, total novice here. I have learnt a lot. Thanks for sharing - the diagrams along with the text make it really easy to understand, especially for a beginner who hasn’t even stepped on a sailing boat.

Daryl Beatt

Thank you. Cleared up quite a few things for me. For example, I was familiar with the names “Xebecs” and “Polaccas” from recent reading about the Barbary War. I had gathered that the two Barbary types were better suited to sailing in the Med, but perhaps they were less able to be adaptable to military uses,(but one might assume that would be ok if one plans to board and fight, as opposed to fight a running gun duel). Specifically, the strangely one sided August 1, 1801 battle between the USS Enterprise under Lt. John Sterett and the Polacca cruiser Tripoli under Admiral Rais Mahomet Rous. On paper both ships seemed nearly equal in size, guns and crew, but pictures of the battle are confusing. While the Enterprise is usually rendered as the familiar schooner, the polacca Tripoli has been pictured in radically different ways. Thus the Wikipedia picture by Hoff in 1878 used to illustrate the Battle shows a Brig design for Tripoli, indicating 77 years later, polaccas were no longer common.

Lee Christiansen

I am curious as to what you would call a modern race boat with a fractional jib,not equipped for full masthead hoist? Thanks Lee

Thanks Guy: The information and pictures really eliminate a lot of the mystery of the terminology and the meanings. Also appreciate the insight of the handling idiosyncrasies “hand” (staff) requirements to manage a vessel for one that has not been on the water much. I long to spend significant time afloat, but have concern about the ability to handle a vessel due to advancing age. The Significant Other prefers to sit (in AC comfort)and be entertained by parties of cruise line employees. Thanks again for the information.

Gordon Smith

Your discussion made no mention of the galleon, a vessel with either square-rigged Fore and Main masts and a shorter lateen-rigged Mizzen, or, on larger galleons, square-rigged Fore and Main masts, with a lateen-rigged Mizzen and a lateen-rigged Bonaventure mast, both shorter than either the Fore or Main masts. Also, it was not uncommon for a galleon to hoist a square-rigged bowsprit topsail in addition to the usual square-rigged spritsail.

Leave a comment

You may also like.

What's that sail for? Generally, I don't know. So I've come up with a system. I'll explain you everything there is to know about sails and rigs in this article.

17 Sailboat Types Explained: How To Recognize Them

Different Types of Sailing and Racing Explained

How Are Sail Numbers Assigned? (And how to pick yours)

Service Locator

• Angler Endorsement
• Boat Towing Coverage
• Mechanical Breakdown
• Insurance Requirements in Mexico
• Agreed Hull Value
• Actual Cash Value
• Liability Only
• Insurance Payment Options
• Claims Information
• Towing Service Agreement
• Membership Plans
• Boat Show Tickets
• BoatUS Boats For Sale
• Membership Payment Options
• Consumer Affairs
• Boat Documentation Requirements
• Installation Instructions
• Shipping & Handling Information
• Contact Boat Lettering
• End User Agreement
• Frequently Asked Questions
• Vessel Documentation
• BoatUS Foundation
• Government Affairs
• Powercruisers
• Buying & Selling Advice
• Maintenance
• Tow Vehicles
• Make & Create
• Makeovers & Refitting
• Accessories
• Electronics
• Skills, Tips, Tools
• Spring Preparation
• Winterization
• Boaters’ Rights
• Environment & Clean Water
• Boat Safety
• Navigational Hazards
• Personal Safety
• Batteries & Onboard Power
• Motors, Engines, Propulsion
• Best Day on the Water
• Books & Movies
• Communication & Etiquette
• Contests & Sweepstakes
• Colleges & Tech Schools
• Food, Drink, Entertainment
• New To Boating
• Travel & Destinations
• Watersports
• Anchors & Anchoring
• Boat Handling
• ← New & Used Boats

Types of Sailboats and Their Uses

Advertisement

Beach Catamaran

These are generally 14–20 feet in length primarily used for daysailing. They are fast boats that require some agility to sail. They have shallow drafts when the dagger boards are up for beaching.

Cruising Catamaran

A larger relative of the beach catamaran, they share more in common with a cruising mono-hull with accommodation for extended cruising. They are stable platforms with shallow drafts and are 25–50+ feet in length.

Cruising Sailboat

Generally 16–50+ feet in length, these boats are cabins for extended cruising. Boats larger than 26 feet usually have standing headroom down below. Many of the more popular models have large fleets and are raced or have fleet associations for group cruising.

These boats are generally 14–20 feet in length. They can seat up to 4 passengers. As the name implied they are intended for day use with a small cuddy cabin for storing gear. Many can accommodate a small outboard. They make a great choice for new boaters.

Motorsailer

Motorsailers are sailboats powered with inboard engines allowing long cruises under power or sail. They have luxury accommodations and usually 35 feet and over. They are a compromise giving up sailing speed due to a smaller rig and added weight for the engine and larger gas and water tanks.

Racer-Cruiser  

This is a hybrid of the cruising boat built to accommodate overnight cruising but trimmed with the equipment for competitive racing. They are generally 25 feet and over.

Racing Sailboats

Similar to cruising boats but have more equipment and are built lighter, with spartan accommodations. They are not intended to be a comfortable ride, just a fast one. Usually 20–70+ feet in length. Just as these are related to cruising boats, there are smaller, faster cousins of sailing dinghies that are also raced.

Sailing Dinghies

Small (under 15 feet) these boats are usually one or two person boats. These are boats that guarantee a wet ride. Many are competitively raced. They are a great choice for those that are new to boating.

Related Articles

The truth about ceramic coatings for boats.

Our editor investigates the marketing claims of consumer-grade ceramic coatings.

Fine-Tune Your Side Scan Fishfinder

Take your side-scanning fishfinder off auto mode, and you’ll be spotting your prey from afar in no time

DIY Boat Foam Decking

Closed-cell foam flooring helps make boating more comfortable. Here’s how to install it on your vessel

Click to explore related articles

BoatUS Editors

Contributor, BoatUS Magazine

Award-winning BoatUS Magazine is the official publication of Boat Owners Association of The United States. The magazine provides boating skills, DIY maintenance, safety, news and more from top experts.

BoatUS Magazine Is A Benefit Of BoatUS Membership

Membership Benefits Include:

Subscription to the print version of BoatUS Magazine

4% back on purchases from West Marine stores or online at WestMarine.com

Discounts on fuel, transient slips, repairs and more at over 1,200 businesses

Deals on cruises, charters, car rentals, hotel stays and more…

All for only $25/year!

We use cookies to enhance your visit to our website and to improve your experience. By continuing to use our website, you’re agreeing to our cookie policy.

Yachting World

• Digital Edition

Best sailing sunglasses: 8 practical options for eye protection on the water

• David Harding
• June 18, 2024

David Harding picks out 8 pairs of the best sailing sunglasses and explains why good quality sunglasses are so important for sailors...

Those of us who go afloat expose ourselves to a lot of ultraviolet (UV) radiation – even on cloudy days in northern Europe. We all know that too much UV is bad for our skin, but it can damage our eyes too: over-exposure can cause cataracts, macular degeneration and photokeratitis (a type of sunburn of the eye) among other conditions.

That’s why we need good quality sunglasses. Any that you buy should filter out UV rays – carrying the CE mark in Europe to show that they meet the required standard – but the best sailing sunglasses will do more besides.

They will make for easier and more comfortable vision in strong sunlight by reducing glare and increasing clarity. Glare is an obvious problem on the water, and bear in mind that water reflects 100% of the UV radiation from above. For these reasons and more, you might decide it’s worth paying for more than just a basic pair.

At a glance:

Our pick of the best sailing sunglasses available now

Gill Corona sailing sunglasses

Best sailing sunglasses from a big-name yachting apparel specialist

Specs: Filter category – 3 | Polarized – Yes | Floating – Yes

Reasons to buy: Light weight, polarized, float if dropped in water, suit a smaller face.

Reasons to avoid: If you have a really large face or head these might not be the ones for you.

Few of the big names in sailing clothing include sunglasses in their range, but Gill does. Available with frames in black, dark blue or silver/grey, Gill’s Corona sunglasses claim to block 100% of the three types of UV radiation – UVA, UVB and UVC.

They feature a hydrophobic coating to shed water (thereby reducing salt residue) and an oleophobic coating on the inside too, to help prevent smudgy vision from fingerprints and sun creams.

They’re designed to float if dropped overboard, though if you’re travelling at 6 knots in a little bit of a chop then good luck finding them. They provide a good close fit and are light and comfortable to wear. They’re also suitable for smaller faces.

Long term tested by Fox Morgan. They said “I bought these for 2021 sailing season after I misplaced my Gill Classics. I really like a lighter coloured frame and Gill have a few options for those styles too. I have a narrow face so finding sunglasses that don’t make me look like Brains from Thunderbirds is tricky.

“I have owned a few pairs of Gill sunglasses and they usually last a few seasons before I ruin them through abuse. They stand up to being chucked about and covered in salt spray really well and they are great value for money. The frames are light and I often forget I’m wearing them.”

When you click on a link from one of our recommendations, we may earn a commission from the retailer. This doesn’t affect the price you pay. This helps to fund our unbiased journalism and we can keep testing gear to bring you the best advice in future.

Tribord 100 Floating Sunglasses

Best budget polarized sunglasses

Reasons to buy: Light weight, polarized, float if dropped in water, don’t fall off easily

Reasons to avoid: Lack of rubber grips on nose/ear pieces, wouldn’t suit those with a wider head

This budget option from Decathlon recently came out on top in our sister title Yachting Monthly ‘s 2022 review of the best polarized sunglasses for sailors .

“As the cheapest shades in our test, we weren’t expecting much from these, but were pleasantly surprised when we took them out of the box as they looked and felt pretty good for such a budget pair,” writes editor Theo Stocker.

“The mirrored polycarbonate lenses sit in an understated frame with in-built buoyancy, making these one of only two floating sunglasses on test. There is no grippy rubber on the nose or ear pieces, but the arms do hook behind the ears with holes to attach a strap.

“Amazingly, these were some of the most secure sunglasses on test, requiring over 500g force to pull them off, perhaps in part thanks to these being the narrowest glasses we tried.”

Oakley Clifden sailing sunglasses

Best sailing sunglasses for the fashion-conscious

Specs: Filter category – 3/4 | Polarized – Yes | Floating – Unclear

Reasons to buy: Unique style from a big name, plus side protection from winds or spray.

Reasons to avoid: Unclear if they’d float or not.

If you prefer flatter lenses to the curved wraparound style, but still want protection from the sides, Oakley’s Clifden might be what you’re looking for.

Oakley says that the polarized lenses are set apart by the fact that they’re made using an infusion moulding process that forms a single layer, as opposed to several layers bonded together with adhesives.

Side shields provide protection around the outside edges of the lenses and a ‘bridge blocker’ fills the gap in the middle over the nose. Lenses are available in a range of tints, the ‘Deep Water Polarized’ being suggested for sailing.

Eyelevel Clearwater sunglasses

Best budget sailing sunglasses

Specs: Filter category – 3 | Polarized – Yes | Floating – Unclear

Reasons to buy: An affordable that offers full UVA/UVB protection.

Reasons to avoid: Shape may not suit a slender face.

Despite their budget price, these stylish, partially-framed shades from EyeLevel’s Polarized Sports range claim to block 100% of UVA and UVB and come with mirrored lenses in a choice of red or blue.

They felt a little more flexible than some alternatives with frames that extend around the entire lens. On the other hand, the full wraparound shape, close fit and generous size of the lenses all combine to give good protection from every angle, which is important when you’re on the water and often surrounded by highly reflective surfaces on boats.

Gill Race Vision Bi-Focal sailing sunglasses

Best bi-focal sailing sunglasses

Reasons to buy: Designed to float; bi-focal element means they can be used as an alternative to reading glasses.

Reasons to avoid: Comes in a soft pouch, rather than a hard case; some reviews report blistering on the interior after a couple of years’ use.

Like Gill’s Classic sailing sunglasses, the Race Vision Bi-Focals are polarized, coated to repel water, oil and fingerprints, designed to eliminate UV rays and also offer built-in flotation. The injection-moulded lenses are said to offer high levels of impact protection as well as scratch-resistance.

As their name suggests, their principal extra feature is the bi-focal element. Virtually undetectable from the outside, and set into the lower part of the lenses towards the nose bridge, it’s available in strengths +1.5 and +2.5 diopter.

If you need reading glasses, Gill’s Bi-Focals might well allow you to leave them at home when heading afloat for the day. Frames come in black or wood-effect.

Triggernaut Transmission sunglasses

Specs: Filter category – 1/3 | Polarized – Yes | Floating – Yes (with additional £3 float)

Best high-tech sailing sunglasses

Reasons to buy: Interchangeable lenses allow you to swap from polarized to low-light lenses; head strap is ideal for watersports; comes in a hard case.

German technology comes to the fore in these ‘performance sports’ sunglasses from Triggernaut. For a start they come with interchangeable lenses: if the polarized grey ones are too dark in low-light conditions, you can change them for an orange pair that will give you a lighter and brighter outlook.

Both are made from a polycarbonate that’s described as shatterproof. Also said to be shatterproof, as well as flexible, are the polyamide frames.

Setting the Triggernauts apart from many sunglasses are two features that make them particularly suitable for watersports . One is the inclusion of a head strap, to help keep them in place if you meet the water unexpectedly.

The other is the ‘windblock’: a padded insert that fits inside the rims and reduces the amount of wind (and light) that can pass between the lenses and your eyes. It can be snapped in and out as you like.

Dirty Dog Wetglass Curl II sunglasses

Best sailing sunglasses for watersports-lovers

Reasons to buy: Vent holes reduce fogging in hot, wet conditions; floats if dropped in water; comes with a 2-year warranty.

Reasons to avoid: More lightweight options are available.

Both the appearance and the features of the Wetglass Curl II make it clear that they were designed with serious watersports in mind: they have polarized lenses in polycarbonate, four UV filters to keep damaging rays away from the eyes, vent holes in the polyamide frames to reduce fogging, and a clip-in detachable strap that looks more likely to stay in place than some of those that slip over the ends of the earpieces (and all too easily slip off again).

Colour options include green lenses in a black frame or grey/blue lenses in a crystal frame.

Bollé Python Black/Blue Matte sunglasses

Best wraparound sailing sunglasses

Specs: Filter category – 1/3 | Polarized – Yes | Floating – Unclear

Reasons to buy: Available in a choice of lenses; lightweight design.

Reasons to avoid: Comes in a soft pouch, rather than a hard case.

Bollé’s solution for better vision on the water is to give the polycarbonate lenses in their Python sunglasses a blue tint to enhance contrast.

However, the wraparound Python style (pythons are known for wrapping around things, after all) is also available with lenses in grey or ‘Brown Fire’, while the frames, made from a lightweight nylon, are offered in shiny black as opposed to matte.

Whichever colour of lens you choose, all are polarized and given hydrophobic and oleophobic treatments. Bollé Pythons are supplied with a microfibre cleaning cloth and a soft protective case.

What we look for in the best sailing sunglasses?

• Polarized: Sunglasses that are polarized should cut out more glare than those that are not polarized, and some manufacturers incorporate more effective polarisation technology than others.
• Water repellent coating: Additional anti-reflective coatings are a feature you will often find, while hydrophobic finishes help repel water – an obvious benefit when you’re afloat.
• UV protection: Bear in mind that darker lenses don’t indicate a higher level of UV protection: the level of tint is a different factor. A further potentially confusing element is that the base colour of the lenses – the cast (if any) that they add when you look through them – is not necessarily the same as the colour of the lenses that you see from the outside.
• Comfort: Whatever features you choose, it’s worth buying close-fitting or wrap-around styles if you want to minimise the amount of unfiltered light reaching your eyes from the sides. And larger lenses can be worth having, because they will help protect the delicate skin around the eyes.

Didn’t find what you’re looking for? Head to Amazon’s dedicated boating page for more marine products.

If you enjoyed this….

Yachting World is the world’s leading magazine for bluewater cruisers and offshore sailors. Every month we have inspirational adventures and practical features to help you realise your sailing dreams. Build your knowledge with a subscription delivered to your door. See our latest offers and save at least 30% off the cover price.

You are about to leave geico.com

When you click "Continue" you will be taken to a site owned by , not GEICO. GEICO has no control over their privacy practices and assumes no responsibility in connection with your use of their website. Any information that you provide directly to them is subject to the privacy policy posted on their website.

Boat Insurance

Start a boat insurance quote and get out on the water..

Or continue previous quote .

Manage Your Boat Insurance Policy

GEICO Marine (formerly Seaworthy) Policyholders

• Log in to GEICO Marine to manage your policy or call (877) 581-BOAT (2628)
• Mon - Fri 8:00 am - 10:00 pm, Sat - Sun 8:00 am - 9:15 pm

SkiSafe Policyholders

• Log in to SkiSafe to your policy or call (800) 225-6560
• Mon - Thu 9:00 am - 7:00 pm, Fri 9:00 am - 6:00 pm, Sat 9:30 am - 5:30 pm

Or call us at (800) 841-3005

Need a boat insurance quote?

Existing boat policyholder?

Get a boat insurance policy to protect your investment.

Boat insurance helps you protect your boat or personal watercraft (PWC) investment. So if you travel across lakes, rivers, or ocean waters of the United States we can help keep your peace of mind afloat. Whether you're looking for a new boat insurance policy or just to save money, we can help you get started with a free boat insurance quote.

Make boating better, together. Experience and a name you can trust go a long way when you're shopping for boat insurance. That's why the GEICO Marine Insurance Company has teamed with BoatUS , the nation's largest group of recreational boat owners. Since 1966, BoatUS has been helping to make boating safer, more affordable, and fun. Together, we share a passion for all things boating.

We all want cheap boat insurance rates, but customer service matters too. Protect your investment with boat insurance you can count on and get your free online boat insurance quote today.

Why do you need boat insurance?

A boat insurance policy helps protect you and your boat. If you don't have a separate boat insurance policy, you're probably underinsured. This could mean paying a lot out of pocket for accidents outside your control. Many homeowners policies cover minor boating risks but don't cover your needs sufficiently due to:

• Size restrictions
• Limitations on horsepower
• Limits on damage coverage

Check out our "boating insurance explained" video and article here for more reasons why boat insurance is a smart idea.

Boat insurance can provide coverage for:

• Damage to your boat including hull, sails, equipment, and more.
• New boat replacement
• Fuel spill liability
• Liability to pay for damages and injuries you cause if you hit another boat, person, dock
• Medical coverage for you and persons in your boat.
• Wreckage removal

What types of watercraft are covered by boat insurance?

All boats aren't the same. You need to customize your boat insurance to meet your needs and provide your watercraft with the proper coverage. Here is a list of the most common types of watercrafts.

• Pontoon boats are one of the most popular inland water boats. They are a flattish boats that rely on floats to remain buoyant. Their wide and spacious area is great for many passengers to enjoy the ride.
• Personal watercraft (PWC) are powered by a water jet pump and the rider generally sits, stands, or kneels on it. There are many types of PWCs which include WaveRunners, Sea-Doos and more.
• Fishing and bass boats are designed and equipped for fishing. Most are powered by an outboard motor and are equipped with power poles, trolling motors, etc.
• Powerboats are the most popular type of boat used for cruising, watersports, and so much more.
• Sailboats are propelled partly or entirely by sails.

If you don't see your watercraft listed and are looking for more information on different types of boats and insurance for boats, check out our boat FAQ page .

What does boat insurance cover?

A policy insures your boat against damage and loss caused by common risks, such as collision, fire, storms, and theft. Boat insurance may also help protect you if you accidently injure someone or damage their property with your boat.

Service and Claims

When you choose GEICO Boat Insurance, you have access to:

• Licensed agents as passionate about boating as you are
• Specialized service including 24/7 claims handling and towing
• Experience you can rely on

24/7 Boat Towing*

GEICO Marine Insurance Company has teamed with TowBoatUS, the nation's largest towing fleet to provide:

• 24/7 boat towing assistance
• On the water towing services provided by TowBoatUS
• Fuel delivery services
• Digital dispatch through the BoatUS app and more

Personal Watercraft (PWC) Insurance Coverage

You can get a boat policy for your PWC. Typical PWC insurance coverage includes:

• Damage to another craft or dock
• Physical damage to your watercraft
• Towing assistance

How much does boat insurance cost?

Boat insurance is based on the type of boat, length, number of engines and horsepower, how you use it (recreation, commercial charter, racing, etc.), and how and where it will be stored. All of these factors, including the experience and claims record of the owner will factor into the cost of boat insurance.

You could save even more with these boat insurance discounts.

We know discounts and our watercraft insurance agents can help you get them to help you save on your boat insurance quote.

Multi-Policy Discounts

If you're a current GEICO Auto Insurance policyholder, you could save on your boat insurance .

Boat Safety Courses

We know that safety comes first when you're having fun on the water. When you pass boat safety courses, you could save money on your boat insurance. Haven't taken one yet? Check out available courses from the BoatUs Foundation Site.

Need to speak with a boat insurance sales representative?

You can reach us at (855) 395-1412

• Mon - Fri 8:00 AM - 10:00 PM (ET)
• Sat - Sun 8:00 AM - 9:15 PM (ET)

Boat Insurance: Get the answers you're looking for.

• Is boat insurance required? Boat insurance liability coverage is only mandated in a few states, so always check insurance requirements for the state you're boating in. Physical damage coverage is required by your lender if you're financing your boat or watercraft. If you keep your boat at a marina, the marina may require you to have liability coverage.
• Liability to pay for damages and injuries you cause if you accidentally hit another boat, person, or dock

There are some types of watercraft that can't be added to a new or existing GEICO boat policy:

• Airboats, amphibious land boats or hovercraft
• Boat with more than 4 owners
• Boats over 50 feet in length
• Boats over 40 years old
• Boats valued over $2,500,000
• Floating homes
• Homemade boats
• Houseboats that do not have motors
• Steel hulls
• Wooden hulls
• Watercraft previously deemed a constructive total loss
• Does boat insurance cover theft? Our Ageed Hull Value, and Actual Cash Value policies protect against damage to your watercraft from incidents out of your control, including theft.
• How do I make a payment or manage my boat insurance policy? Managing your boat insurance policy and making payments is easy in the BoatUS app. You can also manage your policy or make payments online , or by calling (800) 283-2883 .
• How do I report a claim on my boat insurance policy? You can report your claim through the BoatUS app. Claims can also be reported online , or by calling (800) 937-1937 .

GEICO has teamed up with its subsidiary, BoatUS, to bring boaters a policy developed by specialists, with the great service you expect from GEICO. Policies are underwritten by GEICO Marine Insurance Company. BoatUS—Boat Owner's Association of The United States—is the nation's largest association for recreational boaters providing service, savings and representation for over 50 years.

The above is meant as general information and as general policy descriptions to help you understand the different types of coverages. These descriptions do not refer to any specific contract of insurance and they do not modify any definitions, exclusions or any other provision expressly stated in any contracts of insurance. We encourage you to speak to your insurance representative and to read your policy contract to fully understand your coverages. Some discounts, coverages, payment plans, and features are not available for all customers, in all states, or in all locations.

*Boat and PWC coverages are underwritten by GEICO Marine Insurance Company. The TowBoatU.S. Towing Coverage Endorsement is offered by GEICO Marine Insurance Company, with towing services provided by the BoatU.S. Towing Program. Towing coverage only applies to the insured watercraft.

Colorado Language Preference

Are you a resident of or looking for insurance in the State of Colorado?

We are temporarily unable to provide services in Spanish for Colorado residents. You will now be directed to an English experience.

Estamos encantados de ofrecer nuestra nueva version del sitio web en Español. Apreciamos su paciencia mientras seguimos mejorando su experiencia.

Types of Fishing Boats: Finding Your Ideal Boat

Table of Contents

Last Updated on June 18, 2024 by Boatsetter Team

Hop aboard the best fishing boats for pursuing your favorite target species, and you’ll be in for a day of rod-bending fun.

Whether you’re going to rent a fishing boat or buy one of your own, there are plenty of types to choose from. In fact, you’ll encounter a dizzying array of boats including some designed to target specific species, some intended for use in specific types of waterways, and some that are meant to blend fishing and family boating. The top types of fishing boats you’ll likely encounter include:

Aluminum fishing boats

Particularly in freshwater venues, aluminum fishing boats are among the most popular choices around. They may range from 12 to 20-plus feet, and you’ll see everything from simple flat-bottom Jon boats intended for use in protected waters to complex V- hull models that are capable of handling huge bodies of water like the Great Lakes. Aluminum fishing boats are also popular in rivers and bays along the coast, and most of them can be used in saltwater without any problems.

Bass boats are highly specialized fishing machines, dedicated to one purpose and one purpose only: getting you to the bass and helping you catch them. Many feature high power outboards and can zoom across the lake at highway speeds. They tend to be loaded with electronics, as well as fishing accessories like bow -mounted trolling motors and electric pole anchors.

Remember that most bass boats have huge fore and aft decks and very little cockpit room, which makes them ideal for casting from an elevated position but also limits their capacity. In fact, most bass boats are intended to carry just one to three anglers on any given fishing trip. High-end models are usually fiberglass, while more economical models tend to be aluminum builds.

Fish-and-Ski boats

While they may not be the pick of hardcore anglers, fish-and-ski boats are equipped for casting but also have all the traits a boat needs for watersports fun. That’s why many people see fish-and-skis as a top choice when it comes to finding the best family boats . Many have a dual console layout and lots of seating, so they may not have as much open fishing space as a dedicated angling machine, but they’ll also be equipped with critical fishing features like livewells and fishing rod holders.

Fish-and-ski boats are available in both aluminum and fiberglass models, generally range from 17 to 22 feet in length, and usually have potent outboards that can yank a skier out of the hole with no problem.

Fishing pontoon boats

You say one family member wants to kick back and bathe in the sun, another would like to be pulled around the lake on a tow-toy after the fishing is done, and you want to sit in the lap of luxury while you wait for a bite? In that case, a fishing pontoon boat will be what you’re looking for. These are more or less like other pontoon boats but usually have fishing seats at the bow or stern as opposed to couches. Most also have fishing-specific modules added on with a livewell, fishing rod holders, and bait trays or tackle storage compartments.

Inshore saltwater fishing boats

Anglers all along the coastline going after everything from striped bass to snook will want to check out inshore fishing boats . Although most will be center console boats , you may also be choosing from dual console, walkaround, and skiff models. Subcategories of inshore fishing boats which are a bit more specialized for specific forms of fishing include flats boats (for fishing in shallow waters), bay boats (which can still go fairly shallow but also have deeper V-hulls to smooth out the ride in larger bodies of water), and hybrids (which share the traits of multiple different types).

Top features to look for include large livewells, plenty of fishing rod holders, onboard tackle storage compartments, and spacious fishboxes. Most are fiberglass but you will see some aluminum offerings as well, and they may range from 16 up to 30 feet in length.

Offshore saltwater fishing boats

You want to try deep sea fishing , and pursue those massive pelagics? In that case you’ll need an offshore fishing boat. Smaller models will start in the mid 20-foot range and these boats go up to huge 60-foot battlewagons. The vast majority of the offshore fishing boats you’ll see are stoutly built fiberglass models, which can take on big seas and make the long runs that are necessary to get to distant fishing grounds. Offshore fishing boats tend to be heavily equipped with integrated fishing features that run the gamut: livewells, fishboxes, rod holders, rocket launchers, outriggers, tackle and rigging stations, and more.

Which of these types of fishing boats will be best for your next fishing trip? That all depends on where you want to go and what you want to catch. Whatever your choice may be, here’s to hoping you enjoy a day of rod-bending fun.

About   us

Boatsetter  is the leading online marketplace for boat rentals and on-water experiences. Download the Boatsetter app ( App Store  |  Google Play ) and follow  us  on  Instagram .

With over three decades of experience in marine journalism, Lenny Rudow has contributed to dozens of boating and fishing publications and websites ranging from BoatU.S. Magazine to BDOutdoors.com. Rudow is currently the Angler in Chief at Rudow’s FishTalk , he is a past president of Boating Writers International (BWI), a graduate of the Westlawn School of Yacht Design, and has won numerous BWI and OWAA writing awards.

Browse by experience

Explore articles

7 Best Boating Cities for Your Memorial Day Weekend Getaway

How to Rent a Boat

Dock and Dine Basics: Seven Tips for Success

Stay In Command With The New Boatsetter Owner Dashboard

Everything you need to know about MSC Cruises cabins and suites

A relative newcomer in the North American market, MSC Cruises is equal parts elegant and kitschy. The line tends to appeal to a wide swath of cruisers, from Europeans who like to party into the wee hours of the morning to American families who book because of affordable fares and "kids sail free" pricing.

To satisfy its diverse passenger base, MSC offers accommodations to fit all types of travelers. Rooms include inexpensive inside cabins that sleep two people, midlevel staterooms with windows and balconies, and high-end suites that offer cruisers with larger budgets a private oasis in the form of the MSC Yacht Club .

A variety of connecting rooms and cabins with extra bunks accommodate larger groups and families who wish to share space.

Because your cruise cabin will be your home away from home for several days, it's important to book one that fits your needs. That's especially true if you're sharing it with several people.

Whether you're looking at an inside cabin for a cruise with friends, balcony accommodations for you and your significant other or a suite for your family, here TPG breaks down what you can expect when you book a room on one of MSC's ships.

For more cruise news, reviews and tips, sign up for TPG's cruise newsletter .

MSC Cruises cabin primer

MSC Cruises has become one of the fastest-growing lines in the cruise industry, with about two dozen ships in its fleet. The vessels fall into six classes : Lirica, Musica, Fantasia, Meraviglia, Seaside and World.

Although cabin offerings can vary from ship to ship and class to class, the standard types remain the same: inside, outside, balcony and suite.

Additionally, you'll find the same basic amenities in each room, unless otherwise noted below. They include two twin beds that can be joined to form a queen- or king-size bed; an in-cabin bathroom with a shower, a sink, a toilet and basic soap, shower gel and shampoo; a couple of nightstands; a chair or sofa; a desk/vanity; a closet; a safe; a hair dryer; a minifridge; a phone; USB outlets and a selection of both North American and European outlets.

On all ships except MSC Lirica, MSC Opera, MSC Sinfonia and MSC Armonia, you'll also find an interactive TV that allows you to view the daily schedule, check your onboard account and choose from a selection of live TV programs and movies.

Twice-daily room tidying is provided by a room steward assigned to each cabin, and room service is available throughout the day for an added fee.

One confusing aspect of MSC's bookings is that you'll have to select an experience package in addition to a cabin type. Package tiers determine things like your ability to choose a specific cabin and preferred dining time and whether you'll receive welcome amenities in your room. Certain cabin types are only available in conjunction with certain package experiences and vice versa. Those are noted in each respective section below.

Accessible cabins , including accommodations for wheelchair users, are available on every ship in MSC's fleet. In addition to more space, they feature wider doorways and lowered sinks and toilets in the bathrooms, as well as grab bars.

MSC Cruises' experience packages

Here's what you get when you book each of MSC's three experience packages, which determine the perks you'll receive on your sailing.

• Accommodations
• Complimentary food in the dining room and buffet
• Broadway-style theater entertainment
• Access to the onboard gym, pool and kids club
• MSC Voyagers Club points
• One for-fee change to your cruise booking (with some restrictions)
• Drink package discount at time of booking
• All Bella perks
• Choice of specific cabin and location
• One free change to your cruise booking (with some restrictions)
• Ability to choose between early and late seating for dinner
• Room service (complimentary for breakfast, but fees apply for other meals)
• Discount on pre-cruise specialty dining package
• All Fantastica and Bella perks
• Flexible My Choice dining, which lets you eat at any time you choose between set hours
• Free 24-hour room service delivery
• Pillow menu
• A welcome package, including Prosecco and chocolates
• Complimentary access to your ship's solarium and thermal area
• A 10% discount on all spa treatments purchased on board
• Special Balinese massage offer when booked pre-cruise
• Complimentary use of bathrobe and slippers
• Priority boarding and luggage drop-off

Inside cabins on MSC Cruises ships

Inside cabins — rooms with no windows — are available on all ships in the MSC fleet. Ranging from 140 to 301 square feet (depending on the ship), they make for great sleeping because they're so dark. They're also ideal for passengers who are on a budget.

In addition to the standard amenities mentioned above, they provide room for anywhere from two to four passengers to sleep. (Rooms that sleep more than two feature bunks that pull down from the ceiling.)

These cabins are available with the line's Bella and Fantastica experiences.

If you're sailing solo, some MSC vessels offer cabins for one outfitted with a twin bed that converts into a couch. These interior studio accommodations are only available with the Bella package on MSC Meraviglia , MSC Bellissima and the line's World Class ships.

Ocean-view cabins on MSC Cruises ships

Ocean-view rooms are similar to insides in that they provide basic amenities — but with a view.

Offering 129 to 269 square feet of space (depending on the specific ship and ocean-view category), these staterooms allow you to see outside through a porthole or a window that doesn't open.

MSC's outside cabins are available to passengers who book Bella and Fantastica packages.

Additionally, if you're traveling with your family or another group, several of MSC Cruises' ships — particularly those in the Meraviglia and Seaside classes — feature space for as many as 10 passengers via a series of connecting rooms. Options are available at the ocean-view and balcony levels.

Balcony cabins on MSC Cruises ships

You might be surprised to discover that most of MSC Cruises' balcony cabins provide less interior square footage than what's available in inside or ocean-view staterooms.

Balcony rooms run anywhere from 129 to 205 square feet, but their key feature is, of course, a private balcony, which does add an extra 32 to 129 square feet, depending on the vessel and specific type of balcony room booked. These cabins are bookable in conjunction with MSC's Bella, Fantastica and Aurea experiences.

Although balcony cabins offer upgraded amenities, including MSC's brand of hand lotion and toiletries, they are largely the same as inside and ocean-view accommodations.

MSC's newest ships — including those in the Meraviglia, Seaside and World Classes — house connecting balcony rooms that can sleep up to 10 in the same group traveling together.

Additionally, on its World Class ships, the line has introduced inward-facing balconies, similar to the ones Royal Caribbean pioneered in 2009 with the debut of its Oasis Class vessels . On World Europa, for example, they overlook the ship's promenade, offering views of the activity below, rather than the ocean.

MSC Cruises suites

All ships in MSC's fleet have suites that can be booked as part of the Fantastica and Aurea packages, but it's Aurea that offers the largest number of perks, as outlined above.

The several types of suites vary by ship in terms of size and amenities. Some come with balconies, while others only offer floor-to-ceiling panoramic windows.

Junior Suites

Although this room type is listed as a suite, it's essentially a balcony cabin with a bit more space — 183 square feet of interior accommodation with a balcony that ranges from 140 to 183 square feet.

Standard suites include rooms with huge balconies larger than the cabin's interior space and ones with private whirlpool tubs. They run from 269 to 355 square feet, with balconies measuring 32 to 409 square feet.

Grand Suites

Coming in between 377 and 420 square feet, with balconies spanning from 32 to 495 square feet, Grand Suites — found on Seaside and World Class ships — come in two types. They include standard one-bedroom Grand Suites, as well as two-bedroom varieties.

The latter has one bedroom with a queen-size bed and another with two twins. It sleeps up to five passengers and offers two bathrooms — one with a shower and the other with a bathtub.

While most suites are designed for double occupancy, some suite accommodations on MSC Bellissima, MSC Grandiosa, MSC Virtuosa and MSC Magnifica can sleep up to five people.

MSC Yacht Club suites on MSC ships

All cabins located in the MSC Yacht Club — an exclusive, gated area on select ships — are called suites, even the smallest and least expensive, which don't have windows or balconies.

Yacht Club suite types range from insides to two-deck duplexes, all of which come with butler and concierge services, luxuriously appointed furnishings (such as real marble finishes, memory foam mattresses and Egyptian cotton sheets) and access to members-only restaurants, bars (alcohol is free there), lounges, pools and sun decks.

The Yacht Club features seven different types of rooms. Ships that have the MSC Yacht Club on board include MSC Bellissima, MSC Divina, MSC Fantasia, MSC Grandiosa, MSC Meraviglia, MSC Preziosa, MSC Seaside, MSC Seascape, MSC Seaview, MSC Seashore, MSC Splendida, MSC Virtuosa and MSC World Europa.

Note: Not all Yacht Clubs have the same suite types available.

MSC Yacht Club Interior Suites

Although these 161- to 226-square-foot cabins don't offer a view or fresh air, they are elegantly decorated and include all the Yacht Club benefits mentioned above.

MSC Yacht Club Deluxe Suites

These Yacht Club digs are the equivalent of a balcony cabin — but in a dedicated area that includes all the exclusive perks. They run 236 to 366 square feet and have balconies ranging from 54 to 86 square feet, so they also come with a bit more space, both inside and outdoors.

MSC Yacht Club Deluxe Grand Suites

Similarly, Deluxe Grand Suites are like the Yacht Club equivalent of booking a Grand Suite with more perks. Depending on the ship, they offer anywhere from 269 to 463 square feet of space, plus 65- to 129-square-foot balconies. Some Grand Suites also have two bedrooms instead of one. Further, these rooms on Seaside Class ships include bathrooms with bathtubs, as well as separate living areas.

MSC Yacht Club Duplex Suites

Rising two decks, MSC's duplex staterooms measure 495 to 635 square feet and come with 65- to 334-square-foot balconies. They feature living rooms with two-person sofa beds downstairs and master bedrooms upstairs, which also sleep two passengers.

Each of these accommodations comes complete with two walk-in closets and two bathrooms — one with a bathtub and one with a shower. Most duplexes on Meraviglia and World Class ships also have their own private whirlpool tubs.

MSC Yacht Club Executive and Family Suites

The line's Executive and Family Suites, available only on Fantasia Class vessels, are an excellent choice for anyone who wants to stay in the Yacht Club with a family or other group of more than two people.

This option, which is one type of suite (despite its confusing name), has space for up to five cruisers via a combination of bunk beds, sofa beds and beds that pull down from the ceiling, depending on the ship. The suites clock in at around 431 to 549 square feet, depending on the vessel.

The only drawback is that these staterooms have no balconies and no in-room dining areas, but they do include all the perks you'd find in Yacht Club cabins.

MSC Yacht Club Royal Suites

Although they only occupy one level, at 388 to 667 square feet, MSC's Yacht Club Royal Suites are right up there with the Duplex Suites in terms of space. They offer the second-largest amount of square footage after the Owner's Suites. They come with huge balconies comprising 355 to 753 square feet of outdoor area.

Additionally, bathrooms in these suites offer bathtubs on Fantasia, Meraviglia, Seaside and World Class ships, and the latter three have private whirlpool tubs, as well. All four classes' Royal Suites also include separate living room areas.

MSC Yacht Club Owner's Suites

The largest and most impressive of all MSC's cabins are the Owner's Suites found in the Yacht Club. Offering an impressive 840 to 1,119 square feet — larger than some land-based apartments — plus 269- to 670-square-foot balconies, they're some of the most luxurious rooms afloat.

Specific amenities vary by ship, but as an example, Owner's Suites on MSC World Europa offer floor-to-ceiling windows and walk-in closets. These accommodations on both the line's Seaside and World Class vessels also feature bathrooms with separate showers and bathtubs, as well as private whirlpool tubs and separate living room areas.

Bottom line

Although MSC Cruises' cabin types are straightforward, the line's add-on experiences can complicate things a bit.

Overall, what's key to remember is that MSC Cruises offers a wide variety of rooms and pricing to meet just about any budget or style of cruising. Each ship will offer accommodation choices from the least expensive, bare-bones interior rooms to the priciest suites, which come with butler and concierge services.

When you sail with MSC Cruises, you can expect function, style and comfort, regardless of the cabin type you book.

Planning a cruise? Start with these stories:

• The 5 most desirable cabin locations on any cruise ship
• A beginners guide to picking a cruise line
• The 8 worst cabin locations on any cruise ship
• The ultimate guide to what to pack for a cruise
• A quick guide to the most popular cruise lines
• 21 tips and tricks that will make your cruise go smoothly
• Top ways cruisers waste money
• The ultimate guide to choosing a cruise ship cabin

Editorial disclaimer: Opinions expressed here are the author’s alone, not those of any bank, credit card issuer, airline or hotel chain, and have not been reviewed, approved or otherwise endorsed by any of these entities.

Yacht cruise destinations

Relax on an award-winning luxury yacht as you sail the world’s oceans.

• destinations
• Previous page

Discover our yacht cruise destinations

Emerald Azzurra, Calvi, Corsica

Gustavia Harbor, St. Barts

Mauritius Island

Discover the oceans we sail

Mediterranean & adriatic sea, seychelles & the indian ocean.

Featured Itineraries

Loyalty Members Cruise with Ken Muskat - Grenadines & Windwards Yachting

Island hop through the Caribbean by luxury yacht

Grenadines & Windwards yachting

Eastern Caribbean with St. Barths

French & Italian Rivieras with Corsica

Explore the Mediterranean by luxury yacht

Ancient Wonders of Israel, Egypt & Jordan

Discover the Red Sea by luxury yacht

The Secrets of the Red Sea

Mediterranean Enchantment

• Luxury yacht cruises 
• Guide to Yacht Cruising

Your guide to luxury yacht cruising

Stay up to date and be inspired

Yes, please keep me updated with the latest special offers, travel inspiration, product updates, and event invites.

DATA PROTECTION NOTICE

Cookies help us improve your website experience. By using our website, you agree to our use of cookies.