fleming yachts construction (hk) limited

• Boat Details
• Photo Gallery
• Virtual Tours
• Performance & Specs

The Fleming 55 is a well-proven raised pilothouse motoryacht designed for serious cruising. Her semi-displacement hull gives her great flexibility in performance. The Fleming 55 has a range of 2,000 nautical miles at 8 knots yet, with her standard Twin Cummins QSC 500 hp common rail engines, she can attain a top speed of approximately 18 knots. Maximum sustained cruising speed is around 17 knots where her moderate deadrise provides a comfortable ride unlike those boats for which speed is the main design criteria. These high speed, planing hulls require flatter sections making for a hard ride and the need to slow down in a seaway. On long passages, Fleming owners prefer a more leisurely and economical speed of 10 knots, where the typical fuel burn is slightly more than 10 gph.

The Fleming's deep keel provides protection for the running gear and stability in following seas. Because noise and vibration contribute to fatigue, Fleming has paid special attention to producing a yacht which has become the standard in the industry for its whisper quiet, smooth ride. Fundamental to this achievement is the use of Seatorque anti-vibration drive systems. Other builders either charge a heavy premium for this or do not offer it at all.

The Fleming 55 was first introduced in 1986, and since that time it has benefited from a rigorous program of evolution. There have been literally hundreds of improvements made, both big and small. While its legendary hull design remains essentially the same, today's Fleming 55 is a thoroughly modern yacht utilizing advanced technology, materials and construction methods. In 2014 hull number 235 was launched, making it one of the most successful production yachts in history.

55' 9" / 16.99 M

Hull overall, 60' 9" / 18.50 m, length overall, 50' 10" / 15.5 m, 16' / 4.88 m, 5' / 1.52 m, 67,801 lbs / 30,754 kg, displacement (light), 1000 usg / 3785 l, 300 usg / 1135 l, water tanks.

Foredeck and Forepeak

Special attention has been paid to the ability to set and retrieve heavy ground tackle on the Fleming 55. The fiberglass anchor platform is equipped with a Lofrans horizontal windlass with separate capstan and gypsy for 3/8" Hi-Test chain.

Special attention has been paid to the ability to set and retrieve heavy ground tackle on the Fleming 55. The fiberglass anchor platform is equipped with a Lofrans horizontal windlass with separate capstan and gypsy for 3/8" Hi-Test chain. The windlass has a plug-in remote control as well as controls in the pilothouse and on the flying bridge. Double sets of grooved rollers make it possible to self-launch and stow two anchors. These features eliminate the need to wrestle with potentially hazardous chain and anchors. Hose bibs for salt and fresh water are located next to the anchor platform, and there are deck lockers to port and starboard.

A lock-down hatch on the foredeck provides convenient access to the forepeak, which is separated from the rest of the yacht by a collision bulkhead. It has an area for storage of chain and a separate ventilated rope locker. Each features a bitter end fitting. The forepeak drains directly overboard and can be hosed down without concerns that water will contaminate the bilges.

The flared bow turns aside green water and provides a forward deck of unusually generous proportions. The teak handrail has been brought inboard of the sloping bulwarks for convenience and security. To prevent streaking of the hull, the deck scuppers are piped down to the boot stripe, rather than being allowed to drain directly overboard.

Further protection against heavy weather is provided by the design of the Portuguese bridge. There is comfortable seating on its forward side, which is also the location for the forward shore inlets. There is ample storage for fender and lines inside ventilated lockers accessed from the aft side of the Portuguese Bridge and double doors close off the forward deck areas from the side and bridge decks creating a safe area for small children. There are sturdy, stainless steel handrails around the forward face of the pilothouse and down both side decks.

Easy stairs with handrails designed for both adults and children lead down to the wide and well-protected side-decks, which run down both sides of the boat. Here you will find cleats and chocks for forward and aft spring lines. The inward-opening bulwark doors make for easy and safe boarding.

Aft Deck and Swim Platform

With an area of approximately 250 sq ft. the Fleming 55 aft deck is unusually large. Being all at one level, it becomes an extension of the saloon and provides ample space for chairs, donning scuba gear or fishing.

With an area of approximately 250 sq ft. the Fleming 55 aft deck is unusually large. Being all at one level, it becomes an extension of the saloon and provides ample space for chairs, donning scuba gear or fishing. The fiberglass skirt around the edge of the wide teak coaming conceals mood lighting and hides the engine-room air intakes where they are well-protected from salt-laden spray.

Shower fittings for hot and cold water, located next to the inward-opening transom door, are conveniently placed for use while standing on the swim platform. Stainless steel handrails on the transom and a swim ladder, which can be deployed by a person in the water, provide safety and convenience.

Access to the upper boat deck is via a stainless steel ladder and a sliding hatch in the overhead. Access into the lazarette is through lockable hatches, with safe and stylish curved corners. Available as options are a console for cockpit controls and a locker, which can be equipped with a basin and faucets.

Flying Bridge

The Fleming 55 low-profile flying bridge is spacious and packed with practical amenities. Its double helmseat, with folding stainless steel footrest, folds forward to access storage beneath it.

The Fleming 55 low-profile flying bridge is spacious and packed with practical amenities. Its double helmseat, with folding stainless steel footrest, folds forward to access storage beneath it. The control console has full engine instrumentation and ample room for electronics. Access to and from the pilothouse is by a protected internal companionway directly from the pilothouse, avoiding the need to navigate perilous steps or ladders where a slip could result in a fall over the side. A wrap-around venturi windshield with stainless steel handrail provides protection from wind and weather.

There is seating for eight guests close to, but out of the way of, the helm station. A fiberglass table is standard and an ingenious pass-thru "dumbwaiter" eliminates the need to carry refreshments up from the galley. Aft of the seating area is the separate boat deck for yacht tender and davit. From here, a ladder provides direct access to the lower aft deck.

A new, popluar option is the upper deck control station that provides the captain with excellent visibility aft. Complete with bow thruster, throttle and gear controls, backing into a tight slip is easier than ever.

The radar arch provides ample room for the full range of antennae required by modern electronic equipment. Navigation lights are installed vertically and parallel to the ship's centerline in full compliance with Colregs.

Main Saloon and Galley

The saloon in the Fleming 55 features a comfortable L-settee with cushions upholstered over wood frames instead of the usual foam cushions on plywood.

The saloon in the Fleming 55 features a comfortable L-settee with cushions upholstered over wood frames instead of the usual foam cushions on plywood. The sole is hand-laid teak and holly strips, and all built-in furniture is of superior quality joinerwork with rounded corners. There is a hi-lo table of unique design making it suitable for dining and as a coffee table. To starboard is a TV cabinet with pocket doors and space for a DVD player. To port is a bar with icemaker. An optional entertainment center is offered. The saloon opens directly onto the aft deck through double sliding doors. Hand-crafted wood blinds provide privacy and ventilation.

The galley is conveniently located on the same level as the saloon and is properly designed to be used while underway. Either Corian or granite counter tops can be ordered. There are ample storage lockers and drawers, and appliances include a 21 cu. ft. side-by-side fridge/freezer with teak-panel doors and chilled water dispenser; ceramic glass cooktop with practical - yet seldom seen - custom s/s pot-holders; convection microwave; trash compactor and a composite double sink with Grohe faucet and garbage disposer. Space has been provided for an optional dishwasher. A 20-gallon water heater is conveniently located close to the sinks for instant hot water. A pass-through dumbwaiter makes it safe and easy to serve food and drinks to guests on the flying bridge.

Fleming's signature low-profile design is evident even in the interior, as just a few steps lead up to pilothouse and down to the accommodations. Unlike lesser designs, there is no need to go up to the pilothouse and then down to the accommodations level to use the head.

Accommodations

The perfect close to a day of cruising is to retire to a comfortable cabin. The Fleming 55 offers easy access to all the accommodations via a central passage.

The perfect close to a day of cruising is to retire to a comfortable cabin. The Fleming 55 offers easy access to all the accommodations via a central passage. A separate washer and drier are conveniently located behind a sliding door in this passage.

The master cabin is forward for maximum light and ventilation. It features a tapered queen berth with headboard. The bed lifts on gas springs to access storage for bulky items such as bedding and towels. There are two hanging lockers with teak louvered doors and a TV cabinet with space for DVD player.

The master cabin has an en suite head with Corian or granite countertops and a molded fiberglass shower stall. Grohe faucets are used throughout and feature a thermostatically controlled shower. All heads have pressure-jet Headhunter non-clog toilets, which are unique by having no mechanism downstream of the toilet bowl. These toilets are as easy to operate as any household toilet. A fiberglass holding tank holds 100 gals and has a saltwater flush plus vents to port and starboard with anti-odor filters to provide cross-flow ventilation.

The port guest cabin is offered with either two single or one double bed with headboards. An additional slide-out upper berth with either layout is optional. The aft bulkhead has generous bookshelves. The starboard guest cabin has one lower and one upper, slide-out, upper berth. This cabin can also be offered as an optional office with desk, lockers, bookshelves and space for a computer.

The guest head features a one-piece fiberglass molding and shower stall with bi-fold stainless steel doors. The attractive ceramic basin is set in a Corian or granite countertop. Faucets are Grohe with a thermostatically controlled shower.

Throughout the yacht all lighting features Italian gold-plated fixtures. Teak and holly soles are standard.

Engine Room

The Fleming 55 engine room is meticulously well thought out and provides easy accessibility to every piece of equipment.

A signature feature of the Fleming 55 is its quietness and freedom from vibration. Much of the credit for this lies with the Aquadrive anti-vibration system, which isolates the engine and transmission from the propeller thrust, permitting the use of much softer engine mounts. Aquadrives are fitted as standard on every Fleming and their rotating couplings are concealed beneath fiberglass covers for safety.

Another reason for the quietness of the Fleming is the careful attention paid to sound insulation. Lead/foam insulation is used extensively throughout and all hatches are dogged down on rubber gaskets. There are even double hatches separated by an air space over each engine.

Fuel tanks are made of fiberglass with integrally molded sumps to allow maximum useage of fuel. Vinylester resin is used in their construction on the interior and fire-retardant resin in the outer layers. The fuel system has been designed to make the transfer of fuel foolproof. It is impossible to inadvertently overfill one tank by incorrectly switching a fuel return valve.

Access to the engine room is via two hatches in the saloon sole and from the lazarette through a uniquely shaped oval door designed for easy access. Engine room intake air enters from the lazarette to ensure it is free of salt before reaching the engines and generators.

For safety and convenience each Cummins 500 hp engine has start and stop buttons on the engine, and a power take-off is standard on each transmission for efficient installation of optional stabilizers.

Inside the large lazarette are four polyethylene water tanks totaling 300 gallons. Four air conditioning compressors provide heating and cooling for the entire yacht.

Inside the large lazarette are four polyethylene water tanks totaling 300 gallons. Four air conditioning compressors provide heating and cooling for the entire yacht. Against the transom is the steering system with its connection point for the autopilot. The tops for the rudder stocks terminate above the waterline. Also in this location are the secondary mufflers for the main engines. Despite all this equipment there remains 95 cu. ft. of storage for fenders and other cruising gear. Access to the engine room is through the oval-shaped door.

In many modern designs it has become fashionable to eliminate the inside steering station, but the Fleming 55 features a pilothouse which closely resembles the bridge of a much larger vessel.

In many modern designs it has become fashionable to eliminate the inside steering station, but the Fleming 55 features a pilothouse which closely resembles the bridge of a much larger vessel. We created a dedicated place from which the boat is piloted and controlled without any distractions from other on-board activities but which is still only three steps from the saloon and galley. Four interior steps safely lead to the upper flying bridge station.

Specially designed removable consoles provide ample room for a full range of modern electronic equipment without intruding on the full range of engine instrumentation. Overhead consoles provide additional space. There is also a proper chart area with drawers and a chart light. Electrical panels swing out to provide easy access to wiring connections and the inside of the flying bridge console is accessed through a swing-out bookcase. The watch-keeper has their own helm seat and an adjacent, raised L-shaped settee and table provide a comfortable social area with excellent visibility through the side and forward windows.

This is truly the nerve center of the boat where all the systems and crew come together in complete harmony.

Fleming 55 Performance Curves

The following performance curves represent the approximate speeds, fuel consumption and range of a Fleming 55 powered by twin Cummins 500 hp diesel engines. The actual performance of an individual vessel will depend on many factors including, but not limited to, sea and wind conditions, load of vessel and the condition of the vessel's bottom and running gear.

55' 9" / 16.99 M

60' 9" / 18.50 m, 50' 10" / 15.5 m, 16' / 4.88 m, 5' / 1.52 m, 67,801 lbs / 30,754 kg, 80,178 lbs / 36.368 kg, displacement (loaded), cummins 500 hp, main engines, 100 usg / 378 l, black water tank, construction standards.

All Fleming Yachts are built to comply with the appropriate marine and environmental regulations for the area in which the yacht is delivered.

USA - NMMA Certified Manufacturer fully complying with: ABYC, USCG and EPA regulations. European - Built to CE-RCD Category "A" Ocean Standard using the relevant ISO standards. Australia - Australian Standard 1799.1-2009 Canada - Transport Canada TP1332E 04/2010

Management & Environment

Fleming Yachts Construction (HK) Ltd management and environmental systems have met and been approved by ISO 9001:2008 Quality Management Systems and ISO 14001:2004 Environmental Management Standards.

The question most manufacturers ask themselves when considering a new feature is whether it is necessary to include it in order to sell the boat. In the case of the Fleming, we ask only whether its inclusion will make the boat safer, better or more convenient. That is why we have introduced literally hundreds of refinements since we started construction in 1985 and why we continue the process today.

For that reason Fleming Yachts reserves the right to make changes to specifications and equipment without notice

Handcrafted by T2H Advertising     |    Privacy Policy

By continuing to use this website, you consent to the use of cookies in accordance with our privacy policy.

• Visit Our Blog about Russia to know more about Russian sights, history
• Check out our Russian cities and regions guides
• Follow us on Twitter and Facebook to better understand Russia
• Info about getting Russian visa , the main airports , how to rent an apartment
• Our Expert answers your questions about Russia, some tips about sending flowers

Russian regions

• North Caucasus
• Chechnya republic
• Dagestan republic
• Ingushetia republic
• Kabardino-Balkaria republic
• Karachay-Cherkessia republic
• North Ossetia republic
• Stavropol krai
• Map of Russia
• All cities and regions
• Blog about Russia
• News from Russia
• How to get a visa
• Flights to Russia
• Russian hotels
• Renting apartments
• Russian currency
• FIFA World Cup 2018
• Submit an article
• Flowers to Russia
• Ask our Expert

Stavropol Krai, Russia

The capital city of Stavropol krai: Stavropol .

Stavropol Krai - Overview

Stavropol Krai is a federal subject of Russia located in the central part of Ciscaucasia and on the northern slope of the Greater Caucasus in the North-Caucasian Federal District. Stavropol is the capital city of the region.

The population of Stavropol Krai is about 2,780,200 (2022), the area - 66,160 sq. km.

Stavropol krai flag

Stavropol krai coat of arms.

Stavropol krai map, Russia

Stavropol krai latest news and posts from our blog:.

12 January, 2020 / Wooden Church of the Nativity of Mary in Rozhdestvenskaya .

2 December, 2019 / Tsvetnik - the Oldest Park in Pyatigorsk .

16 June, 2019 / Abandoned Uranium Mine in the Stavropol Region .

6 May, 2019 / Cathedral of the Kazan Icon of the Mother of God in Stavropol .

30 September, 2011 / Beautiful nature of Stavropol krai .

More posts..

News, notes and thoughts:

11 January, 2021   / The Kochubeevskaya wind farm with an installed capacity of 210 MW, the largest in Russia, has been commissioned in Stavropol Krai. With a total area of about 200 hectares, it includes 84 wind turbines, each 150 meters high, the length of the blades - 50 meters.

History of Stavropol Krai

The most ancient archaeological finds date back to the 4th millennium BC. The territory of the present Stavropol region was successively part of the state of the Scythians (the 7th - 5th centuries BC), Sarmatians (the 3rd century BC - the 3rd century AD), Huns (the 4th - 5th centuries AD).

Later, from 620 to 969, this territory was part of the ancient state called the Khazar Khaganate. Approximately in the 8th century, with the weakening of the Khazar Kaganate, the medieval state of the Alans appeared here. In 1238-1239, a significant part of the plain Alania was captured by the Mongols, and this state as a political entity ceased to exist.

In 1556, the Russian troops took Astrakhan and opened the way to the North Caucasus and the Caspian Sea. In Ciscaucasia, the interests of Russia, the Ottoman Empire, the Crimean Khanate, and Iran collided.

In 1777, according to the decree of Catherine II, the Azov-Mozdok defensive line was founded, which gave rise to colonization of the Ciscaucasia and the North Caucasus. The territory of the Stavropol region became part of Astrakhan oblast. In November 1777, the fortress called Stavropolskaya was founded. In 1782, about 500 retired soldiers lived there.

More historical facts…

In 1785, in connection with the development of Ciscaucasia, the Caucasian guberniya (province) was created that included the Caucasian and Astrakhan regions. Since that time, Stavropol officially became one of the six county-level towns of the Caucasus region.

With the development of the Ciscaucasia, Stavropol was gaining an increasing importance as an important trade and transit center. It became a kind of the main gate of the Caucasus. In 1822, the Caucasian province was transformed into an oblast and Stavropol became its center. After the defeat of the Decembrist uprising, a lot of its participants were sent here. In 1837 - 1841, Mikhail Lermontov, exiled to the Caucasus, visited Stavropol several times.

In 1847, the Caucasian oblast was reformed into Stavropol gubernia. With the formation of the Kuban and Terek Cossack regions and the end of the Caucasian War, the military-political and economic importance of Stavropol significantly reduced.

In 1919, the Stavropol province was occupied by the Bolsheviks and included in the territory of the North Caucasian Soviet Republic. As a result of the Second Kuban campaign the region went under the control of the Volunteer Army.

In October 1924, the North Caucasian region was formed and Stavropol gubernia was reformed into a district within the region. On January 10, 1934, the North Caucasian Krai was divided into the Azovo-Chernomorsky and North Caucasian. The town of Pyatigorsk became the center of North Caucasian Krai. In March 1936, North Caucasian Krai was reformed and, on its territory, Ordzhonikidze Krai with the center in Ordzhonikidze (Stavropol) was formed.

During the Second World War, from August 1942 to January 1943, the region was occupied by the German troops. In 1943, Ordzhonikidze Krai was renamed Stavropol Krai. In December 1956, the first part of the Stavropol-Moscow gas pipeline with a length of 1,300 km was commissioned (at that time, it was the longest gas pipeline in Europe).

During the 1970s-1980s, 56 new enterprises were opened in the region, among them the Prikumsky Plastics Plant - the largest chemical plant in the region, four power units at the Stavropol power station, and new capacities at the Nevinnomyssk enterprise “Azot”.

On July 3, 1991, Karachay-Cherkess Autonomous Region withdrew from Stavropol Krai and became the Karachay-Cherkess Soviet Socialist Republic. On April 21, 1992, it became the Republic of Karachay-Cherkessia of the Russian Federation.

Steppe landscapes of Stavropol Krai

Stavropol Krai landscape

Author: Valeriy Kharchenko

In the fields of the Stavropol region

Author: Dvornikov Mikhail

Stavropol Krai nature

Author: Zhukova Elena

Stavropol Krai - Features

Stavropol Krai stretches for 285 km from north to south and 370 km from west to east. The climate is temperate continental. The average temperature in January is minus 5 degrees Celsius (in mountains - down to -10), in July - plus 22-25 degrees Celsius (in mountains - +14).

The main natural resources are natural gas, oil, polymetals containing uranium, building materials. Mineral medicinal waters are a special riches of the region.

The Caucasian Mineral Waters is Russia’s largest resort region, which has no analogues in the whole of Eurasia for the richness and diversity of mineral waters and therapeutic mud. The healing properties of “narzan”, one of the popular local mineral waters, are known throughout Russia. The name can be translated into Russian as “Hercules’ beverage”, “Water of Hercules”.

The largest cities and towns are Stavropol (458,200), Pyatigorsk (145,500), Kislovodsk (127,300), Nevinnomyssk (114,400), Yessentuki (117,200), Mikhailovsk (94,500), Mineralnye Vody (72,400), Georgievsk (64,400), Budennovsk (59,600).

Stavropol Krai - Economy

The main industries of Stavropol Krai are engineering, production and processing of oil and natural gas, electric power industry, food (winemaking, butter, sugar), chemical (mineral fertilizers in Nevinnomyssk), building materials (glass in Mineralnye Vody), light (wool in Nevinnomyssk, leather in Budennovsk).

Agriculture specializes in growing grain and sunflower, the leading role in livestock breeding belongs to cattle breeding, fine-wool sheep breeding. Horticulture, viticulture, poultry farming, pig breeding, beekeeping are widespread. Agriculture is one of the most important sectors of the local economy, which employs more than 156 thousand people.

The main highway M29 “Caucasus” passes through Nevinnomyssk, Mineralnye Vody and Pyatigorsk. There are international airports in Stavropol (Shpakovskoye) and Mineralnye Vody. This region has a very dense and extensive network of pipelines.

Attractions of Stavropol Krai

A large number of various interesting places are concentrated on the territory of the Stavropol region. Here are just a few of the most famous sights:

• Proval - a lake and a natural cave on the southern slope of Mount Mashuk in Pyatigorsk. The cave is a cone-shaped funnel with a height of 41 m, at the bottom of which there is a karst lake of mineral water of pure blue color;
• Monument to Lermontov in Pyatigorsk at the place where the poet was fatally wounded during the duel;
• Lake Tambukan (Black Lake), located near Pyatigorsk, is known for its unique healing mud;
• Therapeutic park, mineral springs, Balneary mud baths named after Semashko in the resort city of Yessentuki;
• Resort park in Kislovodsk is very popular with tourists. The territory of the park is huge. Here you can find a drinking gallery, ponds, grottoes, and the famous valley of roses. Plants growing in the park make the air unusually clean and healthy;
• Koltso (Ring) Mount near Kislovodsk. Under the influence of natural factors, a ring with a diameter of 8 meters was formed in the center of the rock;
• Pushkin Gallery (1901), the Emir of Bukhara Palace, the Cave of Permafrost, Zheleznaya Mount in the resort town of Zheleznovodsk.

Stavropol krai of Russia photos

Stavropol Krai scenery

Paved road in Stavropol Krai

Author: A.Kostin

Winter in Stavropol Krai

Author: Kabatov V.

Small river in the Stavropol region

Author: Alex Stanin

Pictures of Stavropol Krai

Beautiful nature of Stavropol Krai

Author: Sergey Shevchenko

Author: V.Buturlia

Cathedral in Stavropol Krai

Author: Bulgakov Pyotr

• Currently 2.96/5

Rating: 3.0 /5 (204 votes cast)

I'm interested in

Lukoil overview.

LUKOIL is one of the largest oil & gas vertical integrated companies in the world accounting for over 2% of crude production and circa 1% of proved hydrocarbon reserves globally.

• Petrol stations
• Press Center
• Sustainability
• Personal data processing policy
• LUKOIL International Tenders
• Non-core assets
• LUKOIL as an Employer
• Our Success Stories
• LUKOIL and Youth

• Technologies
• Innovative Partnership
• Digitalization
• Priority projects
• International Projects
• Exploration
• Oil refining
• Gas processing
• Petrochemicals
• Power Generation
• Premium Sales Channels
• Wholesale and Trading

• Share Capital
• Information for DR holders

• Petroleum Products
• Petrochemical production
• Oil Trading
• LUKOIL GENESIS
• Eco EURO fuel

Press Release

• Press releases
• Press release

LUKOIL AND CHINA’S CC7 CONCLUDE COOPERATION AGREEMENT

Monday, November 13, 2023

PJSC LUKOIL and China National Chemical Engineering & Construction Corporation Seven (CC7) signed a cooperation agreement on creation of a gas chemical facility in the city of Budennovsk, Stavropol region. The document provides for the development of project documentation in cooperation with Russian companies.

The project will allow to capitalize on the natural gas produced at LUKOIL Group fields in the North Caspian by manufacturing carbamide, a chemical fertilizer that is much in demand in the world market.

An option to use an incentive mechanism is currently examined in collaboration with the Stavropol region authorities. This mechanism could take form of a special investment contract for the project, which will create new jobs and additional tax payments.

Information

• Press release in PDF

Contact information

Press Centre PJSC "LUKOIL"

[email protected]

+7 (495)  627-16-77

http://www.lukoil.com

https://www.facebook.com/Lukoil.en

http://twitter.com/lukoilengl

You may be interested

26/09/2024 - lukoil commissions solar power plant in kazakhstan.

LUKOIL put into operation a 2 MW solar power plant in the Almaty region of Kazakhstan. ​

26/09/2024 - LUKOIL EXPANDS ITS FUEL STATIONS NETWORK IN KAZAKHSTAN

LUKOIL opened a flagship filling station in Kazakhstan, at the A3 motorway connecting the cities of Almaty and Oskemen. ​

03/09/2024 - LUKOIL RECEIVES INTERNATIONAL SUSTAINABLE DEVELOPMENT AWARD

LUKOIL became the first Russian company to receive international Sustainability Innovation Awards for organizing safe drinking water supply for the people who live in the Company's regions of operation in Iraq, Mexico, Uzbekistan and Russia. 

• Add to favorites

Communication Center

Useful links

• LUKOIL on Social Networks

• Key projects
• Innovation Partnership
• Media library
• Fraud warning