used sailboats under 35 feet

• BOAT OF THE YEAR
• Newsletters
• Sailboat Reviews
• Boating Safety
• Sails and Rigging
• Maintenance
• Sailing Totem
• Sailor & Galley
• Living Aboard
• Destinations
• Gear & Electronics
• Charter Resources
• Ultimate Boating Giveaway

10 Best Used Cruising Sailboats

• By John Kretschmer
• Updated: May 24, 2024

The appeal of offshore voyaging is difficult to explain to land people who can’t imagine life without basic human rights like copious quantities of hot water and unlimited data. It can even be challenging to explain to fellow sailors who think the notion of spending days or weeks at sea is a form of water­boarding, some kind of self-inflicted torture.

But for those of us who understand, who relish intimacy with the untamed wilderness that is the ocean and embrace self-­reliance and individual expression while accepting the ­dispassionate whims of Neptune, this is the good life.

There are two essential truths about this life: One, money does not matter. Cruising budgets and lifestyles reflect bank accounts with variously positioned commas; it’s the passages and landfalls that add up, not your investment portfolio. And two, a good bluewater sailboat — not necessarily an expensive boat, but a well-­designed, solidly built, imminently seaworthy boat that is only limited by your moxie and imagination — is the key to successful bluewater passagemaking.

– LEARN THE NAVIGATION RULES – Know the “Rules of the Road” that govern all boat traffic. Be courteous and never assume other boaters can see you. Safety Tip Provided by the U.S. Coast Guard

So, to that second point, I’ve compiled a list of interesting and affordable cruising sailboats for serious voyaging. A list of 10 sailboats for any purpose, much less world cruising, is sure to evoke outrage from strong-minded sailors, who by nature tend to be a bit opinionated. Stand by before hurling insults my way, and let me explain. I have decided to stay away from the sailboats we know by heart, the iconic old boats that usually populate a list like this: the Westsail 32, Tayana 37, Shannon 38 and Valiant 40 (the last of which, with a bit of searching, can still be found at or just below $100,000).

My list of some of the best liveaboard sailboats is eclectic and includes a mix of well-known and obscure manufacturers, but all the boats are linked in three ways: All are top-quality vessels capable of crossing oceans. They’re affordable, although in a few cases you have to look for older models in less-than-stellar condition to stay below $100,000. Indeed, in some ways, this list of used sailboats is a function of age; most of the boats were priced at more than $100,000 when new but have dipped below our self-imposed threshold in middle age. And finally, they’re all boats that I have encountered in the past few years in far-flung cruising destinations .

Island Packet 35

Love them or loathe them, Island Packets are everywhere. To some, the beamy, full-keel, high-freeboard hull designs seem quaint, to put it charitably. To others, the robust construction standards, roomy interiors and overall user-friendliness make them the ideal cruising boat. More than most, sailing vessels are compromises, and Bob Johnson and his crew at Island Packet were brilliant in prioritizing the needs of sailors. The IP 35 was introduced in 1988 and features a huge cockpit, an easy-to-handle cutter rig with a jib boom, and a clever, comfortable interior with the volume of many 40-footers. It might not be the fastest boat upwind, but the long waterline translates to good performance off the breeze, meaning the IP 35 finds its stride in the trade winds. In all, 188 boats were built before production stopped in 1994.

Don’t confuse the IP 35 with the IP 350, which was launched in 1997 and included a stern swim step. You won’t find a 350 for less than $100,000, but you will have a choice among 35s, especially those built before 1990. With two nice staterooms, the 35 is ideal for family cruising. I know of a couple of 35s that have completed the classic Atlantic Circle passage. It’s perfect for a sabbatical cruise because it holds its value and there’s a ready market when it comes time to sell.

Prout Snowgoose 37

There’s no room for discussion: Catamarans are crossing oceans, and many sailors are choosing cats for world cruising. My last visits to the Azores and Canary Islands, the classic Atlantic waypoints, proved the point. I’m not much of a statistician, but by my count, at least a quarter and maybe a third of the boats I saw were catamarans. There would be more on this list, but they are just too expensive. Finding a quality catamaran for less than $100,000 is tough. One boat to consider is the classic workhorse multihull, the Prout Snowgoose 37.

When the Snowgoose 37 was launched in 1983, English builder Prout & Sons had already been in business for nearly 50 years. The 37 was an updated version of the Snowgoose 35, one of the most successful cruising cats ever. In 1986, the 37 was updated again; the Snowgoose Elite model included more beam and interior upgrades. These models are challenging to find for under $100,000, but it’s possible. A quick glance at yachtworld.com shows several of both models available for less than $100,000. Again, the strong dollar makes European boats an excellent value.

The Snowgoose 37 is not sexy like go-fast cats, and not roomy like modern cruising cats. It is, however, seaworthy. Of the 500 built, many have circumnavigated. Older boats have solid fiberglass hulls, and more recent models are solid glass from the waterline down and cored above. The cockpit is rather compact by catamaran standards, and the bridgedeck is solid (no tramp). Many 37s and all Elites were rigged with staysails, a big plus in heavy weather. The masthead-­rigged Snowgoose 37 can be sailed like a monohull offshore, and it’s quite nice not having a huge, roachy mainsail to wrestle with in a storm. With a 15-foot-3-inch beam for the 37 and a 16-foot-3-inch beam for the Elite, it’s easy to find affordable dockage and yards for haulouts. Most boats have three double cabins, making the Snowgoose 37 an ideal family cruiser.

The Corbin 39 is not as well known as it should be. It’s a capable bluewater sailboat cruiser with many impressive voyages logged. My Quetzal spent several weeks moored alongside a handsome 39 in Corfu that had sailed around the world, and I also spent a winter in Malta in the same boatyard as another 39 that had recently crossed the Atlantic. A canoe-stern, flush-deck pilothouse cutter, the 39 was offered with either an aft or center cockpit. Designed by Michael Dufour and constructed by Corbin les Bateaux in Canada, hull number one was launched in 1977. Built in various locations in Quebec, 129 boats were launched before a fire destroyed the deck tooling in 1982. A new deck with a larger cockpit was designed, and 70 more boats were laid up before production ceased in 1990.

The rub on the Corbin 39 is that the majority of boats were sold as kits with owner-­finished interiors. Kits varied from just hull-and-deck to “sailaway,” with everything fitted except the interior. Only 15 boats were finished at the factory. Not surprisingly, the interior quality is unpredictable, from rough-hewn lumberyard specials to beautifully handcrafted gems finished by marine professionals. The difference is reflected in the price. A nicely finished, well-equipped model from the mid-’80s typically sells for between $60,000 and $80,000.

The hull shape features a long fin keel and skeg-mounted rudder. The hulls are heavily laid up and include Airex coring. Early decks were plywood-cored, but most boats have Airex in the deck as well. Ballast is 9,000 pounds of internal lead, translating to a 40 percent ballast-to-displacement ratio. The wide flush deck is spacious, and the sleek pilothouse usually includes inside steering. Massive double anchor rollers are incorporated into the bowsprit in later models. Most boats include a double-­spreader spar, and almost all were set up as cutters. There’s plenty of freeboard, which becomes obvious below. While interior arrangements vary considerably, there’s a lot of room to work with. I prefer the post-1982 aft-cockpit 39s; they’re generally of a higher quality than earlier boats.

– CARRY A BEACON – Satellite beacons such as EPIRBs or PLBs allow boaters to transmit distress signals and their exact coordinates from anywhere on the planet, no cell service required. It may be the best $400 you ever spend. Safety Tip Provided by the U.S. Coast Guard

Cabo Rico 38

“The Cabo Rico 38 hull shape is the one in which everything came together best,” wrote Bill Crealock in his design notes. He might have changed his mind later in life, considering that the Cabo Rico was introduced in 1977 and he designed many boats after that, but few will dispute that this 38-foot cutter, built in Costa Rica, is flat-out beautiful. From the clipper bow to the sweet sheer to the abundance of honey-colored teak, the Cabo Rico 38 is a boat to inspire the most practical among us to quit their job, buy this vessel, and head for the South Pacific.

Not surprisingly, many people have done just that. Cabo Rico built 200 full-keeled 38s, with most of the production occurring in the 1980s. There’s always a selection of boats for sale for less than $100,000. Cabo Rico was an outlier among manufacturers of the time, building serious cruising boats in Central America instead of Taiwan, but quality control was always excellent. The full keel is slightly cutaway, and the rudder is attached to the trailing edge. The prop is in an aperture and totally protected, but not well suited to backing into a slip. Full-keel boats may make some younger sailors cringe, but the CR 38 has a very soft ride in rough seas and heaves to effectively. It also has a solid fiberglass hull with a layer of balsa for insulation. Sometimes it’s noted that the hull is balsa-cored, but it’s not. After about hull number 40, lead was used instead of iron for internal ballast. The deck is balsa-cored, however, and there’s a substantial bulwark. Items to be wary of are the teak decks (most 38s have them) and the fittings supporting the bobstay.

A true cutter rig, the 38 has just under 1,000 square feet of working sail area and performs better than most people suspect. The staysail was originally set on a boom that cluttered the foredeck and limited sail shape. Many boats have been converted with furling staysails sans the boom — a nice upgrade. When the wind pipes up, the 38 tracks nicely with a reefed main and staysail. I encounter 38s all over the Caribbean. They’re easy to spot; they’re the beautiful boats in the anchorage.

Tayana Vancouver 42

Ta Yang, builder of Tayana sailboats, has been building capable cruising boats forever, it seems. The Robert Harris-designed Tayana Vancouver 42 has been a mainstay of the serious cruising fleet since the day it was launched in 1979, and is still in demand today. The company built 200 boats, mostly in the ’80s and early ’90s, although a few V42s were built into the 2000s. With a bit of digging and some haggling, you can find boats for less than $100,000, but they’re likely to be older models. As of this writing, yachtworld.com has eight V42s listed, with three asking less than $100,000.

I’ve encountered the V42 all over the world, and in my yacht-delivery days, I had the pleasure of delivering a couple of 42s up the East Coast and down to the Caribbean. The double-ended hull shape with a fin-skeg underbody is stiff and seaworthy, if not wickedly fast. Considering the rugged construction, with a solid fiberglass hull and balsa-cored deck, nobody has ever accused Ta Yang of going light on its boats. Ballast is internal iron, a massive single casting that weighs in at 11,800 pounds. Ta Yang has evolved as a builder, and later models included upgrades like vinylester resin and larger Yanmar diesels.

A true cutter, the V42 has a double-spreader rig and is heavily stayed. The seagoing deck is cambered to shed water. Teak decks, with all their virtues and vices, were common; I’d look for a boat that’s been de-teaked. Like the Corbin 39, the V42 came with either a center or aft cockpit, although most boats were aft-cockpit models. The aft cockpit is deep and secure, if a bit tight due to volume sacrificed by the canoe stern. The center cockpit is cramped but offers excellent visibility. The interior is lovely, with exquisite Taiwanese joinery. Although interior arrangements vary because Ta Yang encouraged owner input, across the board, this is a friendly boat for living aboard. The aft-cockpit model includes one head and a traditional layout with excellent light and ventilation. The center-­cockpit model features a large owner’s stateroom aft.

Wauquiez Pretorien 35

The Pretorien 35 does not pay homage to tradition. The Euro-style low-slung wedge deck and flattish lines were thoroughly modern when the Pretorien was launched in 1979. Sure, there are IOR influences in this well-proven Holman & Pye design, including a slightly pinched stern, cramped cockpit, and a high-aspect, short-boom mainsail that results in a large fore­triangle. But a small main is easy to handle offshore, especially in squally conditions, and a large poled-out furling genoa provides a low-stress way to cross oceans. The test of a design is revealed long after the launch, and the Pretorien has aged brilliantly. It’s often mistaken for a Swan or Baltic. Famed voyager and author Hal Roth chose a Pretorien for his last boat.

Below the water, which is what really matters at sea, the Pretorien pushes the right buttons for serious sailing. A fine entry provides enough of a forefoot to prevent pounding in lumpy conditions, and as on the Valiant 40, the fin keel incorporates a stub to which the external ballast is fastened. The rudder is mounted well aft for excellent steering control, especially on a deep reach, and is tucked behind a narrow but full-length skeg. The Pretorien displaces 13,000 pounds, of which 6,000 pounds is ballast, translating to a stiff, seakindly boat.

The construction is superb. The solid fiberglass hull includes longitudinal stringers that stiffen the panels and encapsulate the bulkheads. Tabbing and fiberglass work is first-rate throughout. Wauquiez was one of the first builders to use solid laminate beneath high-load deck fittings. The side decks are wide and, with the chainplates well inboard, easy to navigate. The interior arrangement is conventional, but ample beam amidships helps create a surprisingly spacious feel below.

There were 212 Pretoriens built during a seven-year production run, so there’s usually a good selection of boats on the used market. Today’s strong dollar makes European Pretoriens an excellent value.

– SHOW THEM HOW MUCH YOU CARE – Nothing says ‘I love you’ like making sure the kids’ life jackets are snugged up and properly buckled. Safety Tip Provided by the U.S. Coast Guard

Gulfstar 44

Gulfstar had a terrible reputation in the early ’70s: It was infamous for producing wide-body motorsailers with tiny rigs and chintzy Formica interiors. Company founder Vince Lazzara was adept at reading market trends and upped his game in the late ’70s and ’80s. Lazzara, who also founded Columbia Yachts, was a veteran of the production-­sailboat wars and realized that buyers were demanding high-quality boats that sailed well. The Gulfstar 44 was launched in 1978, and 105 were sold before the company started producing the Hirsh 45 in 1985.

Some mistake the G44 for a Bristol, and it has a similar profile, right down to the teak toerail and raked cabin trunk. A sleek center-­cockpit design, the hull shape features a 5-foot-6-inch fin keel, a skeg-hung rudder and moderate proportions. I know the boat well, having delivered one from Bermuda to Annapolis and another from Fort Lauderdale to Boston. It has a nice ride in lumpy seas and powers up when the big genoa is drawing on a reach. The construction is typical of the time, with solid fiberglass hulls and cored decks. Gulfstars were known to blister, and it’s likely that any 44 you find will have had an epoxy bottom job along the way — and if it hasn’t, it will need one. The keel-stepped spar has an air draft of 55 feet. Some owners have modified the sloop rig with a staysail. The cockpit is roomy, especially for a center-cockpit design, although there’s not much of a bridgedeck. All sail controls are led aft. Lazzara was an early proponent of this feature, and the boat is user-friendly overall.

The interior sells the boat. It’s nicely finished in teak, and the layout is made for living aboard. The aft cabin includes an enormous double berth with an en suite head and stall shower. The main saloon is spacious and well ventilated, although beware of the plastic opening portlights. If you are looking for a comfortable, well-built center-cockpit cruiser but can’t find one that you can afford, track down a Gulfstar 44; you’ll be pleasantly surprised.

Any list of bluewater cruising sailboats must include a Robert Perry design. I could have easily put together nine Perry boats for this list. The Nordic 40 may surprise some, especially because 40 feet is an iconic length, bringing to mind such boats as the Valiant 40, Hinckley Bermuda 40, Bristol 40, Pacific Seacraft 40, Passport 40 and others. The trick is finding a 40-footer for less than $100,000. Nonetheless, the Nordic 40 and its larger sister ship, the 44, are among my favorite boats.

Based in Bellingham, Washington, Nordic produced world-class yachts during its brief production run in the 1980s. Only 40 Nordic 40s were launched between 1982 and 1987, but they’re worth seeking out on the used-boat market. The 40 features the classic double-ended Perry hull shape, with a fine entry, a deep and powerful fin keel, a skeg-mounted rudder positioned well aft, and a reverse transom. Freeboard is moderate and the sheer line is subtle, but to my eye, with its double-spreader rig and gently sloping deck line, the boat is poetry in the water.

The hull is solid fiberglass and the deck is balsa-cored, with solid laminates below loaded-up deck fittings. Original boats came with Navtec rod rigging and a hydraulic backstay, but many have been upgraded by now. Sail-control lines are led aft to the compact but functional T-shaped cockpit. The traveler is forward of the companionway, allowing for a cockpit dodger. The Nordic 40 is nimble in light to moderate breeze but can also stand up in a blow and heave to decently.

The interior is well suited to a cruising couple. It’s really a two-person boat, with a V-berth forward and large C-shaped galley aft, with plenty of counter space and a huge fridge. It includes the normal deft Perry touches — excellent sea berths, a separate stall shower and generous tankage. If you do find a Nordic 40 on the used market, be sure to take a hard look at the Westerbeke diesel and the V-drive transmission.

Pacific Seacraft 34

A handsome, nimble and capable double-ender by legendary designer Bill Crealock, the Pacific Seacraft 34 is well proven, with scores of ocean crossings in its wake.

After the boat was first launched as the Crealock 34 in 1979, Pacific Seacraft introduced a fifth model years later, a scaled-down version of the popular PS 37. Though expensive at the time, the 34 was another success story for one of America’s premier builders, and hundreds of boats were built in the company’s yard in Santa Ana, California. There is always a good selection of used boats available for less than $100,000. Another nice perk for used-boat buyers is that the 34 is back in production at the reincarnated Pacific Seacraft yard in Washington, North Carolina, providing an outlet for parts and advice. The company is now owned and operated by marine archaeologist Stephen Brodie and his father, Reid.

The 34 blends traditional values above the waterline with what was then a more modern underbody, with a long fin keel and skeg-hung rudder. A bit hefty at 13,500 pounds of displacement, the design otherwise is a study in moderation, and drawn with a keen eye toward providing a soft ride in a seaway and staying on good terms with Neptune in a blow.

The hull is solid fiberglass, and early decks were plywood-­cored before Pacific switched to end-grain balsa. The hull-to-deck joint incorporates a molded bulwark that offers added security when you’re moving about on deck, and a vertical surface for mounting stanchions.

Most 34s are cutter-rigged for versatility but carry moderate-­size genoas instead of high-cut yankees for more horsepower off the wind. Down below, the layout is traditional, but the 6-foot-4-inch headroom is a pleasant surprise. The Pacific Seacraft 34 is perfect for a cruising couple.

John Kretschmer is a delivery captain, adventurer and writer, whose own boat Quetzal , a 1987 Kaufman 47, has seen a refit or two over the years. His latest book is Sailing a Serious Ocean: Sailboats, Storms, Stories and Lessons Learned from 30 Years at Sea , also available on his website .

• More: classic plastic , DIY Sailboat Projects , Sailboat Reviews , Sailboats , used boat guide
• More Sailboats

Baltic Behemoth: Hanse 510

The Pelagic 77 Amundsen is Delivered

New Boats on Deck

By Sail Or Paddle: Meet the 17′ Salish Voyager

Northern Exposure

The Boat Refit Edition: Next Season’s Upgrades

• Digital Edition
• Customer Service
• Privacy Policy
• Terms of Use
• Email Newsletters
• Cruising World
• Sailing World
• Salt Water Sportsman
• Sport Fishing
• Wakeboarding

• New Sailboats
• Sailboats 21-30ft
• Sailboats 31-35ft
• Sailboats 36-40ft
• Sailboats Over 40ft
• Sailboats Under 21feet
• used_sailboats
• Apps and Computer Programs
• Communications
• Fishfinders
• Handheld Electronics
• Plotters MFDS Rradar
• Wind, Speed & Depth Instruments
• Anchoring Mooring
• Running Rigging
• Sails Canvas
• Standing Rigging
• Diesel Engines
• Off Grid Energy
• Cleaning Waxing
• DIY Projects
• Repair, Tools & Materials
• Spare Parts
• Tools & Gadgets
• Cabin Comfort
• Ventilation
• Footwear Apparel
• Foul Weather Gear
• Mailport & PS Advisor
• Inside Practical Sailor Blog
• Activate My Web Access
• Reset Password
• Customer Service

• Free Newsletter

Tartan 37 Used Boat Review

C&C 33 Mark II Used Boat Review

Island Packet 350 Used Boat Review

Beneteau 393 Used Boat Review

How to Create a Bullet-Proof VHF/SSB Backup

Tips From A First “Sail” on the ICW

Tillerpilot Tips and Safety Cautions

Best Crimpers and Strippers for Fixing Marine Electrical Connectors

Are Wrinkles Killing Your Sail Shape?

Superlight Anchors: Not Just for Racers

Refining Furling Line Fairleads

Revive Your Mast Like a Pro

Diesel-Electric Hybrids Vs. Electric: Sailing’s Auxiliary Power Future

Sailing Triteia: Budget Bluewater Cruising

How To Keep Pipe Fittings Dry: Sealant and Teflon Tape Tests

How Much Does it Cost to Own a Sailboat in Quebec,…

Anode Basics: Dos and Don’ts

What’s The Best Bottom Paint?

Boat Hook and Fender Hacks

Product Hacks: Velcro, Bounce, Anti-Skid Mats and Pool Lights

Stopping Holding-tank Odors

Giving Bugs the Big Goodbye

Galley Gadgets for the Cruising Sailor

Cold Weather Clothes to Extend the Sailing Season

Five Best Gloves: Sailing and DIYing in All Weather

Sailing Gear for Kids

What’s the Best Sunscreen?

R. Tucker Thompson Tall Ship Youth Voyage

On Watch: This 60-Year-Old Hinckley Pilot 35 is Also a Working…

On Watch: America’s Cup

On Watch: All Eyes on Europe Sail Racing

Dear Readers

• Sailboat Reviews

Affordable Cruising Sailboats

Practical sailor reviews nine used boats over 35 feet and under $75,000..

In a search for a budget cruiser, Practical Sailor examined a field of used sailboats costing less than $75K and built between 1978 and 1984. We narrowed the field to boats with sufficient accommodations for four people and a draft of less than 6 feet. One way to approach a used-boat search is to look for sailboats with informed, active owners associations and high resale values. Practical Sailor’s quest for recession-proof cruisers led us to the Allied Princess 36, Bristol 35.5C, Endeavour 37, S2 11.0, Freedom 36, ODay 37, Niagara 35, C&C Landfall 38, and the Tartan 37. The report takes a more in-depth look at the Tartan, C&C Landfall, and Niagara.

Let’s say you’re looking to buy a boat for summer cruising along the coastal U.S. or on the Great Lakes, one that, when the time is right, is also capable of taking you safely and efficiently to Baja or the Bahamas, and perhaps even island-hopping from Miami to the West Indies. Like most of us, your budget is limited, so a new boat is out of the question. Let’s set more specifics:

• Passes a thorough survey by a respected surveyor and has been upgraded to meet current equipment and safety standards. (These are old boats, after all, prone to all sorts of potentially serious problems.)
• Fun to sail inshore (which means not too heavy and not too big).
• Sufficient accommodations and stowage to cruise four people for two weeks.
• Popular model (active owners support group for help and camaraderie) with decent resale value
• Under $75,000.
• Monohull (multihulls violate the price cap, anyway).
• Draft of less than 6 feet (for the islands, mon).

In the February 2008 issue, we examined 30-footers from the 1970s , which is just above the minimum length for the Big Three: standing headroom, enclosed head, and inboard engine. Too small, however, to satisfy our new criteria. So we need to jump up in size. As we culled through the possibilities, we found a fairly narrow range of boat lengths and vintages that satisfy the criteria. Of course, there always are exceptions, but basically it is this: 35- to 38-footers built between 1978 and 1984. Bigger or newer boats that meet our criteria cost more than $75,000.

Heres the list of nine models we came up with: Allied Princess 36, Bristol 35.5C, C&C Landfall 38, Endeavour 37, Freedom 36, Niagara 35, ODay 37, S2 11.0, and the Tartan 37. All were built by reputable companies in the U.S. or Canada, with underwater configurations ranging from full keels with attached rudders to fin keels and spade rudders. Displacements are mostly moderate.

Below we present notes on six of the finalists. Details of our 3 favorites are linked to the right of this page.

ALLIED PRINCESS 36

Allied Yachts developed an excellent line of cruising sailboats in the 1960s, including the first fiberglass boat to circumnavigate, the Seawind 30 ketch, which later was expanded to the 32-foot Seawind II. The handsome Luders 33 was the boat in which teenager Robin Lee Graham completed his historic circumnavigation. Arthur Edmunds designed the full-keel Princess 36 aft-cockpit ketch and the larger Mistress 39 center-cockpit ketch. None of these boats are fancily finished, but the fiberglass work is solid and well executed. They’re ocean-worthy, and affordable. The Princess 36 was in production from roughly 1972 to 1982. Wed look for a later model year; prices are under $50,000.

BRISTOL 35.5C

Bristol Yachts was founded by Clint Pearson, after he left Pearson Yachts in 1964. His early boats were Ford and Chevy quality, good but plainly finished, like the Allieds. Over the years this changed, so that by the late 1970s and early 1980s, his boats were between Buicks and Cadillacs in overall quality. This includes the Ted Hood-designed 35.5C. Its a centerboarder with a draft from 3 feet, 9 inches board up to 9 feet, 6 inches board down; a keel version also was available (named without the “C”).The solid fiberglass hull was laid up in two halves and then joined on centerline. It had an inward-turning flange on the hull, superior to the more common shoebox hull-to-deck joint. The 35.5C is very good in light air, but tender in a breeze. Pick one up for around $60,000.

ENDEAVOUR 37

The Endeavour Yacht Corp. was founded in 1974, and its first model was a 32-footer, built in molds given to it by Ted Irwin. Yup, the Endeavour 32 has the same hull as the Irwin 32. Its second model was the Endeavour 37, based on a smaller, little known Lee Creekmore hull that was cut in half and extended. Its not the prettiest boat in the world, and not very fast, but heavily built. Owners report no structural problems with the single-skin laminate hull. It has a long, shoal-draft keel and spade rudder. What helped popularize the Endeavour 37 was the choice of layouts: an aft cabin with a quarter berth, a V-berth and quarterberth, and a (rare) two aft-cabin model. Production ended after 1983. Prices are around $50,000.

After the Halsey Herreshoff-designed Freedom 40 that reintroduced the idea of unstayed spars, several other designers were commissioned to develop the model line-up. These included David Pedrick and Gary Mull; the latter drew the Freedom 36, in production from about 1986 to 1989. While the early and larger Freedoms were ketch rigged, models like the 36 were sloops, which were less costly to build and easier to handle. To improve upwind performance, a vestigial, self-tacking jib was added. Thats the main appeal of these boats: tacking is as easy as turning the wheel. The 36s hull is balsa-cored, as is the deck. Balsa adds tremendous stiffness, and reduces weight, which improves performance. The downside: Core rot near the partners on this boat could lead to a dismasting and costly hull damage. Interior finishing is above average. These boats sell right at our price break: low to mid-$70s.

This low-profile family sloop was second only to the ODay 40 in size of boats built by ODay under its various owners. Founded by Olympic gold-medalist George ODay to build one-designs and family daysailers, subsequent ownership expanded into trailer sailers and small- to medium-size coastal cruisers. Like the others, the 37 was designed by C. Raymond Hunt Associates. The center-cockpit is a bit unusual but some prefer it. The cruising fin keel and skeg-mounted rudder are well suited to shallow-water cruising, and the generous beam provides good form stability. The hull is solid fiberglass, and the deck is cored with balsa. Owners report it is well balanced and forgiving. Early 1980s models are on the market for less than $40,000.

Built in Holland, Mich., the S2 sailboat line emerged in 1973 when owner Leon Slikkers sold his powerboat company, Slickcraft, to AMF and had to sign a no-compete agreement. The 11.0 was the largest model, introduced in 1977. The designer was Arthur Edmunds, who also drew the Allied Princess 36, though the two are very different. Edmunds resisted some of the bumps and bulges indicative of the International Offshore Rule (IOR), but still gave the 11.0 fine ends, and a large foretriangle. Two accommodation plans were offered: an aft cockpit with conventional layout of V-berth, saloon, and quarter berth and galley flanking the companionway; and an unusual center-cockpit layout with V-berth forward immediately followed by opposing settees, and then galley and head more or less under the cockpit. The master suite is in the aft cabin, of course. The hull is solid fiberglass and includes the molded keel cavity for internal ballast; the deck is balsa-cored. Overall construction quality is rated above average. Prices range from about $30,000 to $50,000.

NIAGARA 35: a handsome cruiser with Hinterhoeller quality.

Austria-born George Hinterhoeller emigrated to Canada in the 1950s and began doing what he did all his life: build boats, first out of wood, then fiberglass composites. He was one of four partners who formed C&C Yachts in 1969. He left in 1975 to again form his own company, Hinterhoeller Yachts. The company built two distinct model lines: the better known Nonsuch line of cruising boats with unstayed catboat rigs, and the Niagara line. About 300 Niagara 35s were built between 1978 and 1995.

Canadian naval architect Mark Ellis designed the Niagara 35 as well as all of the Nonsuch models. He gave the 35 a beautiful, classic sheer with generous freeboard in the bow, swooping aft to a low point roughly at the forward end of the cockpit, and then rising slightly to the stern. The classic influence also is seen in the relatively long overhangs; todays trend is to lengthen the waterline as much as possible, with near plumb bows, discounting the old belief that overhangs were necessary for reserve buoyancy. So the Niagara 35 has a somewhat shorter waterline than the others in our group of nine, but as the hull heels, the overhangs immerse and sailing length increases. The short waterline also accounts for the 35s moderately high displacement/length ratio of 329. There is a direct correlation between the D/L and volume in the hull, and for a cruising boat, there must be sufficient space for tanks and provisions. Unfortunately, tankage in the 35 isn’t that much: 80 gallons water, 30 gallons diesel fuel, and 25 gallons holding tank.

The cruising fin keel is long enough for the boat to dry out on its own bottom should the need arise, like drying out against a seawall in Bali to paint the bottom. (Sorry-just dreaming!) The spade rudder seems a little unusual for a cruiser. When asked about it, Ellis said that it provides superior control to a skeg-mounted rudder, and that skegs, which are supposed to protect the rudder, often aren’t built strong enough to do the job. Circumnavigator and designer/builder/developer Steve Dashew agrees that offshore, in nasty conditions, spade rudders are the way to go.

Construction

George Hinterhoeller and his associates at C&C Yachts were early advocates of balsa-cored hull construction, because it reduces weight, increases panel stiffness, and lowers costs. The worry, of course, is delamination of the core to the inner and outer skins should water penetrate through to the core. This is why quality builders remove balsa coring wherever through-hulls or bolts pass through the hull or deck, and fill the area with a mix of resin and reinforcements. Hinterhoeller was such a builder, but core integrity still deserves close inspection during a pre-purchase survey.

All bulkheads are tabbed to the hull and deck with strips of fiberglass, and this is an important detail for an offshore boat. Many mass-produced boats have molded fiberglass headliners that prevent tabbing bulkheads to the deck; rather, the bulkheads simply fit into molded channels in the headliner, which do not prevent them from moving slightly as the boat flexes in waves.

Hardware quality is good. One owner described the chocks and cleats on his Niagara as “massive.” Hatches are Atkins & Hoyle cast aluminum, which are about as good as you can buy. And the original rigging was Navtec rod. Owners report no structural problems.

Performance

With its moderately heavy displacement, conservative sailplan, and relatively large keel, the Niagara 35 is not a speed demon, and does not point as high as a boat with a deep, narrow fin keel. But thats not what were after here. The 35s specs are just about what we want for a versatile cruising boat. Owners say performance picks up quickly as the breeze fills in. If the sailplan were larger, for improved light-air performance, youd have to reef sooner, and reefing is work.

The long keel has another advantage, and that is improved directional stability over shorter keels, which means less effort at the helm. We tend to think that a powerful below-deck autopilot can steer any boat, but autopilots struggle, too. A boat thats easy for the crew to hand steer also is easy for the autopilot to maintain course.

A lot of Niagara 35s were equipped with Volvo saildrives rather than conventional inboard diesel engines. Advantages of the saildrive: improved handling in reverse and lower cost. Disadvantages: potential corrosion of aluminum housing and not as much power. Various inboard diesels were fitted: Westerbeke 27-, 33-, and 40-horsepower models, and a Universal M35D, all with V-drives. Owners rate access somewhat difficult.

Accommodations

Two interior layouts were offered: the Classic, in which the forepeak has a workbench, shelves, seat, and stowage instead of the usual V-berth; and the Encore, which has an offset double berth forward, and quarter berth and U-shaped galley aft. The saloon in the Classic, with settees and dining table, is farther forward than usual; the head and owners stateroom, with single and double berths, is aft. Both plans have their fans.

Headroom is 6 feet, 4 inches in the main cabin and 6 feet, 2 inches in the aft cabin. Berths are 6 feet, 7 inches long; a few owners say berth widths are a bit tight. A couple of thoughts on the double berths offered in these two plans: V-berths are subject to a lot of motion underway and so do not make great sea berths, but at anchor, ventilation via the forward hatch makes them far more comfortable than a stuffy aft cabin, where its much more difficult to introduce air flow. Offset double berths do not waste outboard space like V-berths do, but the person sleeping outboard must crawl over his/her partner to get out of bed.

Thirty-year-old boats should be surveyed thoroughly. Nothing lasts forever, but boats well maintained last a lot longer. Pay particular attention to the balsa-cored hull and deck. If either has large areas of delamination, give the boat a pass, because the cost to repair could exceed the value of the boat.

A few owners expressed concern about the boats handling off the wind, which surprises us somewhat. A test sail in lively conditions should answer that question.

We much prefer the inboard. If you prefer the saildrive, look for signs of corrosion and get a repair estimate.

Niagara 35 Conclusion

The Niagara 35 is a handsome, classically proportioned cruising sloop from one of the best builders of production boats in North America. It is not considered big enough these days to be a circumnavigator, but certainly large enough for a couple to leisurely cruise the Bahamas, Caribbean Sea, and South Pacific. We found asking prices ranging from around $54,000 to $89,000, with most in the $60,000 range.

C&C LANDFALL 38

As noted, George Hinterhoeller was one of four partners who formed C&C Yachts in 1969, at Niagara-on-the-Lake, Ontario. The others were Belleville Marine, Bruckmann Manufacturing, and the design firm of George Cuthbertson and George Cassian. From the beginning, the emphasis was on performance. Indeed, the 40-foot Red Jacket won the 1968 Southern Ocean Racing Circuit (SORC).

In 1973, Cuthbertson retired to his Ontario farm, citing burn-out. Eight months later, he was back as president of C&C Yachts, telling staff that they ought to pursue more multi-purpose racer/cruiser models. C&C became the dominant boatbuilder in North America, with models ranging from the C&C 24 to the C&C 46, with models just about every 2 feet in between. The Landfall cruiser series was introduced in 1977, with the Landfall 42. It was followed by the Landfall 35, 38, and 48. Production of the 38 ran from 1977 to 1985, with about 180 built.

The C&C Landfall 38 is directly related to the earlier C&C 38. We wrote in our original 1983 review that the older hull design was “…modified with slightly fuller sections forward, a slightly raked transom rather than an IOR reversed transom, a longer, shoaler keel, and a longer deckhouse for increased interior volume.” The spade rudder is not everyones first choice on a serious cruising boat, but it does provide superior control. And the Landfalls have a higher degree of finish inside, along with layouts more suited to family cruising.

The Landfalls perform very well, thanks to lightweight construction and speedy hull forms. The Landfall 38s displacement/length ratio of 272 is the lowest of the three compared in this review.

Notable drawbacks: a V-berth that becomes quite narrow forward, and as noted in the 1983 review, “a hull that rises so quickly aft that C&Cs normal gas bottle stowage at the end of the cockpit is eliminated.” This on a cruising boat no less, where a hot meal is often the highlight.

Like nearly all the C&C designs, the Landfall 38 is attractively proportioned with sleek lines and a modern look, even several decades later. It appears most dated in the raked bow, but this better suits the anchoring duties on a cruising boat anyway.

Materials and building processes used in C&C Yachts are very similar to those of the Niagara 35, namely because of Hinterhoeller. Practices he established at C&C continued after he left, at least for the short-term. So what we said about the Niagara 35s balsa-core construction also applies to the Landfall 38, where it is found in the hull, deck, and cabintop.

The hull-deck joint is through-bolted on 6-inch centers, through the teak toerail, which gaves the Landfall series a more traditional look than the distinctive L-shaped anodized aluminum toerail Cuthbertson designed and employed on the rest of the C&C models. The joint is bedded with a butyl tape, which does a good job of keeping out water, but doesn’t have the adhesive properties of, say, 3M 5200. On the other hand, if you ever had to remove the deck-heaven forbid!-it would be a lot easier.

Deck hardware is through-bolted with backing plates or large washers, although some of the fasteners come through on the underside, where the core transitions into the core-less flange. We also saw this on our old 1975 C&C 33 test boat. It means two things: water migrating down the fastener after the bedding fails can contact a little bit of balsa, and uneven stresses are placed on the fastener, which above deck can cause gelcoat cracks.

Proper bronze seacocks protect the through-hulls, and hoses are double-clamped for added security. The mast butt is not deep in the bilge where it can corrode in bilge water, but rests on two floor timbers in the sump, above any water that would typically collect.

The external lead-ballast keel is bolted through the keel sump in the hull. Its run is flat, and the boat can sit on its keel, allowing it be careened against a seawall for bottom painting, prop repairs, or other work in locales where boatyards are rare.

In our earlier review, we noted that the engine compartment has no sound insulation, despite its proximity to the owners berth, but gluing in some lead-lined foam is within the capability of most owners.

Despite being 2,000 pounds heavier than the C&C 38, the Landfall 38 is still a quick boat. Its old PHRF rating of 120 is just a little higher than the Cal 39 at 114, and less than the Tartan 37 we’ll look at next.

The mast is a little shorter than that of the C&C 38, but as with most boats of the IOR era, the Landfall 38 has a large foretriangle of 385 square feet. A 150-percent genoa measures 580 square feet, which is a handful for older crew. Roller furling with maybe a 135 percent genoa would be a logical way to minimize the effort required to tack this boat.

Strangely, the Landfall 38 did not come standard with self-tailing winches; a highly recommended upgrade. The main halyard, Cunningham, and reefing lines are led aft to the cockpit, while the headsail halyards run to winches on deck near the mast.

The boat is stiff and well balanced. Owners like the way it handles and appreciate its speed.

The standard engine was a 30-hp Yanmar diesel. The early Yanmar Q series had a reputation for being noisy and vibrating a lot. At some point, C&C began installing the Yanmar 3HM which replaced the 3QM. Power is adequate. The standard prop was a solid two-blade. Engine access leaves a lot to be desired.

The interior is pushed well into the ends of the boat to achieve a legitimate three-cabin accommodation plan. The standard layout was a V-berth forward with cedar-lined hanging locker. The berth narrows quickly forward so that tall people might not find enough foot room. Moving aft, there is a dinette and settees in the saloon, U-shaped galley and large head with shower amidships, and a double berth in the port quarter, opposite a navigation station. In rainy or wild weather, youll want to close the companionway hatch and keep weather boards in place so that water doesn’t spill into the nav station. Installing Plexiglas screens on either side of the ladder will help.

Oddly, there is no place to install fixed-mount instruments outboard of the nav table; that space is given to a hanging locker, but could be modified. Other than this, about the only other shortcoming is that the toilet is positioned so far under the side deck that persons of average size cannot sit upright. And, the head door is louvered, which compromises privacy.

There is not a lot to complain about with the Landfall 38 that we havent already said: the V-berth forward is tight, theres no sitting upright on the toilet, theres no place to install electronics at the nav station, and the nav station and aft berth invite a good soaking through the companionway.

Construction is above average, but have a surveyor sound the hull and decks for signs that the fiberglass skins have delaminated from the balsa core. Small areas can be repaired, but our advice is not to buy a boat with widespread delamination.

Landfall 38 Conclusion

The Landfall 38 is an excellent family boat and coastal cruiser. Its popularity in the Great Lakes region is not surprising. Island hopping to the Caribbean is also within reach, but any longer cruises will likely require more tank capacity and stowage. Standard tankage is 104 gallons water and 32 gallons of fuel. Prices range from around $55,000 to $65,000.

TARTAN 37: shoal draft and S&S styling.

In the early years of fiberglass boat construction, the major builders-Columbia, Cal, Morgan, Tartan, and others-commissioned well-known naval architects to design their models. Today, this work is more often done by a no-name in-house team over which the company has more control. Tartan Yachts of Grand River, Ohio, relied almost exclusively on the prestigious New York firm of Sparkman & Stephens; they’d drawn the Tartan 27 for the company’s antecedent, Douglass & McLeod, and were called on again to design the Tartan 37, which had a very successful production run from 1976 to 1988.

The Tartan 37 has the modern, clean, strong lines that typified S&S designs. The bow is raked, and the angle of the reverse transom is in line with the backstay-an easily missed detail that nevertheless affects the viewers impression of the boat. Freeboard is moderate and the sheer is gentle. In an early review, we wrote: “Underwater, the boat has a fairly long, low-aspect ratio fin keel, and a high-aspect ratio rudder faired into the hull with a substantial skeg.” In addition to the deep fin keel, a keel/centerboard also was offered. A distinctive feature is how the cockpit coamings fair into the cabin trunk. Its displacement/length ratio of 299 and sail area/displacement ratio of 16.1 rank it in the middle of the 9-model group (see table, page 9), so while it looks racy, its not going to smoke the other nine.

From its beginning, Tartan Yachts set out to build boats of above average quality, and this can be seen in both the finish and fiberglass work. Some unidirectional rovings were incorporated in the hull laminate to better carry loads; like the vast majority of boats of this era, the resin was polyester. Vinylester skin coats, which better prevent osmotic blistering, had yet to appear. Some printthrough is noticeable, more on dark-color hulls. The hull and deck are cored with end-grain balsa, which brings with it our usual warnings about possible delamination. The hull-deck joint is bolted through the toerail and bedded in butyl and polysulfide. Taping of bulkheads to the hull is neatly executed with no raw fiberglass edges visible anywhere in the interior. Seacocks have proper bronze ball valves. One owner advises checking the complex stainless-steel chainplate/tie rod assembly, especially if its a saltwater boat.

Shortcomings: Pulpit fasteners lack backing plates. Scuppers and bilge pump outlets have no shutoffs.

Under sail, the Tartan 37 balances and tracks well. As noted earlier, its not a fireburner, but not a slug either. Its no longer widely raced, but the few participating in PHRF races around the country have handicaps ranging from 135-177 seconds per mile. The Niagara 35 now rates 150-165, and the C&C 38 126-138.

The deep fin-keel version points a little higher than the keel/centerboard because it has more lift, however, the deep draft of 6 feet, 7 inches is a liability for coastal cruising.

Because of the large foretriangle and relatively small mainsail, tacking a genoa requires larger winches and more muscle than if the relative areas of the two were reversed. For relaxed sailing, jiffy reefing of the main and a roller-furling headsail take the pain out of sail handling.

The 41-horsepower Westerbeke 50 diesel provides ample power. Standard prop was a 16-inch two blade. A folding or feathering propeller reduces drag, thereby improving speed. Access to the front of the engine, behind the companionway ladder, is good. Unfortunately, the oil dipstick is aft, requiring one to climb into the starboard cockpit locker-after you’ve removed all the gear stowed there.

The layout below is straightforward with few innovations: large V-berth forward with hanging locker and drawers; head with sink and shower; saloon with drop-down table, settee, and pilot berth; U-shaped galley to starboard; and to port, a quarterberth that can be set up as a double. To work at the navigation station one sits on the end of the quarterberth. This plan will sleep more crew than most owners will want on board, but its nice to have the option. Pilot berths make good sea berths but often fill with gear that can’t easily be stowed elsewhere.

The fold-down table, like most of its ilk, is flimsy. Underway, tables should be strong enough to grab and hold on to without fear of damaging it or falling-thats not the case here. And the cabin sole is easily marred trying to get the pins in the legs to fit into holes in the sole.

Finish work in teak is excellent, though this traditional choice of wood makes for a somewhat dark interior. Today, builders have worked up the nerve to select lighter species such as ash and maple.

Eight opening portlights, four ventilators, and three hatches provide very good ventilation.

The standard stove was alcohol, which few people want anymore, owing to low BTU content (which means it takes longer to boil water), the difficulty in lighting, and almost invisible flame. Propane is a better choice, but there is no built-in stowage on deck for the tank, which must be in a locker sealed off from the interior and vented overboard. (You could mount the tank exposed on deck, but that would not complement the boats handsome lines.)

Theres not much to pick at here, but we’ll try. Centerboards come with their own peculiar set of problems: slapping in the trunk while at anchor, broken pendants and pivot pins, and fouling in the trunk that inhibits operation.

Often what sets apart higher-quality boats from the rest of the fleet is the cost of materials and labor in making up the wood interior. They look better than bare fiberglass, work better because they have more drawers and stowage options, and are warmer and quieter. The unnoticed flip side is that the joinerwork tends to hide problems, like the source of a leak. When all the fasteners are neatly bunged and varnished, it takes courage to start pulling apart the interior!

Checking engine oil is unnecessarily difficult, and to operate emergency steering gear (a tiller) the lazarette hatch must be held open, which could be dangerous. Lastly, the companionway sill is low for offshore sailing; stronger drop boards would help compensate.

Tartan 37 Conclusion

The enthusiasm for this boat is strong. In fact, theres a whole book written about it, put together with the help of the Tartan 37 Sailing Association (link below). You’ll pay in the mid- to high-$60s, which ranks it with the Niagara 35 and Freedom 36 as the most expensive of our nine. While Tartan 37s have made impressive voyages, and are as capable as the Niagara 35 and C&C Landfall 38, like them, its not really a blue-water design. We view it rather as a smart coastal cruiser and club racer. Good design and above-average construction give it extra long life on the used-boat market.

Classic Cruisers For Less Than $75,000

Niagara 35 Sailnet Forum

C&C Photo Album

Tartan Owners

Tartan 37 Sailing Association

RELATED ARTICLES MORE FROM AUTHOR

29 comments.

Great article, but why did you leave out your namesake build – Camper Nicholsons Nicholson 35. Very similar to the Niagara 35, except that it trades the (less than useful – my opinion) quarter berths for two GIGANTIC cockpit lockers. And I find the transverse head on the Nic a civilized alternative to telephone booth head/shower combinations.

While the Nic claims 6 berths, you’ll never find that many on ours. Cocktails for 6, dinner for 4, sleeps 2 is our mantra

This is great information and a good guideline to go by. Thanks for the heads up on theses vessels.

Every time Practical Sailor does a review of boats in the 35- to 38-footers built between 1978 and 1984, they always leave out the Perry designed Islander Freeport 36 and 38. Many people are still cruising in these great boats, and among Islander Yachts designs this one is a wonderful cruiser.

I was also sad to see that. We sail a ’79 I-36, and it is stiff, fast, forgiving, and a very comfortable cruising platform. While many of the 800+ built are ready for the wrecking ball, there are some excellent, well cared for boats available. They are lovely sailors.

Couldn’t agree more, with Islander Freeport 36 & 38 raised coachroof that opens up all sort of possibilities and transom based swim ladder, her utility is unmatched.

These are all nice boats. I have sailed most of them. I owned a Tartan 37 for 4 yrs. As A US Sailing Cruising instructor, I have sailed and cruised hundreds of boat. This is one of the best balanced and behaved boats that I have sailed. She will sail on jib alone with no lee helm and sail main alone with minimal weather helm. Few boats will do this. She tracks quite well in a seaway. There are only 2 instances that you need to put the centerboard down: clawing off a lee shore or racing upwind. Otherwise she is just fine with board up. I have not had problems with the board slapping in a rolley anchorage. I keep the board up tight all the way and no problem. And my boat a 1983 had a built in propane vented locker. Also my dipstick was forward port and easy to reach, but not so for the filter so I remote mounted it forward. S & S did a great job on this design. And a 4 foot draft is wonderful and special feature for a boat that sails so well.

Surprising that the author did not address the obvious question, “if you had to pick one of these for a bluewater cruise, which one would it be?”

I too would appreciate the author’s response to this question.

Every time I star liking one of these I see the word ‘balsa’

Why did you not look at the Catalina 36. They are sea kindly; easy to repair and get parts; there’s a lot of them; and newer ones are in the price range you are talking about.i.e. my 2002, well fitted, is $72500.

Good article, thanks.

Pearson 365 conspicuously missing from this list.

Excellent article with factors that almost all of us who own vintage older cruising sailboats have considered at one time or another. However, when making my choice and before putting my money down, I also included PHRF as a factor. Without degenerating into a large discussion of pros and cons of PHRF (or any other indexes of performance), I think that you should consider performance in the equation. While livability is important (and I am a comfort creature), the ability to run away from a storm or handle tough conditions, is also important, you don even mention it. Paraphrasing Bill Lee, “faster is fun”. After weighing all of the factors discussed above, and adding considerations for performance, I purchased a 1984 Doug Peterson designed Islander 40 for $65,000 and am still in love with the boat 15 yrs later. It still is a “better boat than I am a sailor” and is also very comfortable. The only drawback is that it draws 7’6″ which in SF Bay, is not a problem. On the “right coast” that might be a problem, but on the “correct coast” it has not been.

Hate to be picky but you left out of this old list a high quality design and blue water capable cruiser designed and made by quality Canadian company–Canadian Sailcraft, namely CS 36 T. A Sailboat 36.5 feet with all the necessary design and sailing numbers needed to be attractive , safe, and fast.

No one likes to see their favorite boat left off a list like this, but it must be done. But my Ericson 38 has almost none of the cons of the boats in this article, and most of the desireable pros. After 13 years of ownership, it hasn’t even hinted at breaking my heart. Great design pedigree, glassed hull/deck joint, ahead of its time structural grid, points high, extremely liveable interior, and the list goes on…so much so that I’m glad I didn’t buy ANY of the boats in the article instead.

Missing are the CSY 37 and 44. Ernest M Kraus sv Magic Kingdom CSY 44 walkover cutter

Very useful article. Thanks! I’d love to see the same framework for a selection of length 40′-50’ft coastal cruisers.

I know that it is hard to include all boats, but you missed a boat that fills all the requirements. I’m speaking about the Bob Perry designed and Mirage built 35. It has all the capabilities and handling characteristics that you would want in a capable cruiser and the speed of a steady over-performing racer-cruiser. It has 6’5″ headroom and all the standard features that are a must in a strong well built beauty with 5 foot draft, light but rigid and strong. Great for the Chesapeake bay or other depth challenging bodies of water.

Great publication through the year’s. Still miss my print version to read on rainy day. Owned a Cal 27 T-2 and Irwin Citation over the years. Sailed on the Chesapeake. The Irwin ended up in Canada. JA

We have a Swallow Craft Swift 33. The boat was made in Pusan Korea in 1980. For a 33′ boat it is cavernous. We live aboard 1/2 the year. I thought it might be a boat you would be interested in looking at. I call it a mini super cruiser.

How about the Pearson 367?

Surely this is a joke. I’ll put the Nonsuch 30 Ultra against anyone.

Good article, but another vote for the CS36T. No better value for an offshore capable, fast cruiser and built to last.

Great article

The list looks familiar to the list I was working with back around 2004. Back then the prices were even higher of course. To fit my budget, I got a great boat… Freedom 32. That is a Hoyt design from TCI. All I really gave up was some waterline. Below deck, the boat is as roomy as many 35-36 footers due to the beam. I find it to be a great boat for me. I do not see a move up to the sizes on this list to improve my lot. I could be tempted by a Freedom sloop over 44′ but that is retirement noise.

which edition of month/year of the PS Magazine is this covered in please, it would be great to know?

A great article, but what about the Young Sun 35 Cutter! a great offshore boat that I have sailed single handed from Canada to Hawaii and back, single handed, in rough conditions, but which was an incredible 30 days each way. Overall 40 ft. and 11 ft. beam. I believe also built by Bob Perry!

I was sorry to see you left out any offerings from Cape Dory, a Massachusetts-based company that offered sturdy cruising yachts up to 45 feet, many of them designed by Carl Alberg. We’ve enjoyed our Cape Dory 30 cutter on both coasts since the 1980s.

I would be very interested to know what this article would suggest today. For $75,000, should it be a smaller Catalina/Hunter/Beneteau less than 20 years old or would you still recommend an older and maybe larger boat?

LEAVE A REPLY Cancel reply

Log in to leave a comment

Latest Videos

J Boats J/9 Sailboat Review and Boat Tour

3 Tips for a Dry Boat – DIY Boat Maintenance 101

Jeanneau’s New Rule Breaking Sailboat – Sun Odyssey 350 Boat Review

A Fiberglass Cleaning Boat Hack You Have To Try!

Latest sailboat review.

• Privacy Policy
• Do Not Sell My Personal Information
• Online Account Activation
• Privacy Manager