Art.Nr.: 2545-505
contents (g): 500
€39.90*
0.5 kg ( €79.80 * / 1 kg ) In stock.
Nous sommes fermés du 15 au 24 juin. Toutes les commandes passées pendant les congés seront traitées à partir du 25 juin 2024.
Couldn't load pickup availability
Description EPOXY FIBER FILLER is a very effective two-component epoxy putty, filled with fiberglass and fast drying. This multi-phase filler is characterized by its high water resistance and good sandability. Thanks to the glass fibers it contains, EPOXY FIBER FILLER can be applied at a thickness of up to 3 cm in one coat without shrinkage. This fiberglass putty hardens to a thin, dry surface. Application domain EPOXY FIBER FILLER is a composite material particularly suitable for filling deep irregularities and bonding polyester or carbon laminates, steel, aluminum and hardwood. Used in all areas requiring high resistance to mechanical stress and water. Tension and elongation forces are better absorbed thanks to the special fibers and transmitted evenly. Polyester laminates and steel and aluminum substrates must be prepared with a two-component epoxy primer such as HEMPEL LIGHT PRIMER. Features Color: light blue Layer thickness: max. 3cm Mixing ratio: 2:1 Pot life: approx. 30 minutes at 20°C Content 2 kilograms.
Spécifications, subscribe to our newsletter.
Be the first to benefit from our promotional offers
Part № 150637
vat included
Description
High Build Epoxy Filler Yachtcare 5 kg is two component epoxy putty, easy to apply, instead of the traditional method of application of the sealant, High Build Epoxy Filler spreads with a nylon roller and is smoothed using a spatula or squeegee. Where once more primary layers and mastic were needed now is obtained by a single stroke of a roller with even layer thickness and an identical surfacing. T he epoxy does not lose volume after drying. The thickness of the wet layer is identical to that of the dry layer. High build epoxy fillers offers greater layer thickness and a greater protection than a standard primer. For a primer standard, it generally takes a shrinkage of about 50%. An application to High build epoxy roll provides a layer thickness of equal if not greater (up to 600 microns) equivalent to 7 - 8 manual application of a traditional bi - component primer. And the sealant can very quickly be covered with another layer, smoothed and sandpapered.
Specifications
Ean/Barcode
Detailed Specifications
Color: pure white Capacity: 5 kg
Filler colour
Application
Use Yachtcare products safely . Before use, read the label and product information.
Features: Exceptional water resistance to anti-osmotic protection and rust Suitable for all types of common materials in the nautical world (about 500 microns.) (laminate, carbon reinforced plastic, steel, aluminium, plywood and hardwood) for high strength Corrects imperfections use on wood, metal, steel, aluminium, carbon and glass fiber with rapid recovery and a fast drying time (2 hours between coats) sanding after 5 hours Great smoothing properties and sanding .
Polyester reinforced with fiberglass filler, to be used on metal, wood or poylester fibelglass
Garanties sécurité (à modifier dans le module "Réassurance")
Politique de livraison (à modifier dans le module "Réassurance")
Politique retours (à modifier dans le module "Réassurance")
We provide a wide array of bio-based fillers for epoxy resins and other thermosetting materials. Epoxies have strong adhesive properties and can be used in virtually any material such as glues, paints, coatings, varnishes and composites.
First and foremost, we offer a bio-based and sustainable option for companies seeking to replace metal and mineral powders. Secondly, we offer a new generation of functional performance powders that can enhance material properties in a variety of ways.
BioPowder.com are fine powders made exclusively from renewable sources. We only transform side-stream raw materials, above all top-grade olive stones, into additives of any micron size range.
Our hydrophobic options Olea FP H50 and H100 are lightweight functional epoxy fillers that integrate well with conventional and bio-resins. While rendering any resinous product more environmentally friendly, they add a variety of functional benefits and can offer significant material cost savings thanks to their low density. At BioPowder.com, we work with different hydrophobicity treatments to make sure our epoxy fillers are compatible with a variety of chemistries.
Epoxy resin formulations come in different textures and viscosity levels. They are mostly developed for applications in the construction industry, especially in form of coatings for surfaces such as concrete, plastics, metal, wood and carbon fibre - often with the aim of protecting the underlying material. Epoxy paints are colored resin formulations found in many household appliances, vehicles and electrical installations.
In construction chemistries, epoxy coatings are often applied in conjunction with polyurethane (PU) systems. This is due to their complementary functionalities: epoxy, being less resistant to UV radiation (sunlight) and presenting a relatively low abrasion resistance, is often applied to a surface as a foundation layer. A PU coating is then applied on top as a finish layer. The mechanical properties of polyurethane coatings generally ensure a longer lifespan and better protective performance.
BioPowder.com epoxy resin fillers can be the ideal additive for both epoxy and PU coatings. Our line of functional powders, marketed under the brand Olea FP, were developed to add the following benefits:
Nowadays, new standards also apply for functional and decorative floorings, for example in industrial plants, healthcare centers and retail outlets: they need to be free of potentially harmful substances (e.g. isocyanates, BPA) but still have a high abrasion resistance and stability. Biodegradable epoxy resin fillers with a high hardness such as Olea FP support your developments in that direction!
To reduce your testing effort, we have created our own flooring line: naturazzO Resilient Floors are a unique resin mix with Olea FP as fillers. The formula can be customized with different natural colorants and BioPowder.com olive stone granules as texturizers and anti-slip additives.
Epoxy resins are widely used to restore and repair wooden floors and furniture: cracks are filled with a resin that matches the colour of the object. Achieving such color control has long been a challenge for formulators of bio-based epoxies. Our BioPowder.com Olea FP epoxy filler was designed for use in epoxy-based putties and pastes. As in coatings, our natural particles can act as reinforcing fibres besides adding texture, abrasion resistence and durability.
Moreover, Olea FP can prevent color modification in liquid and semi-solid formulations. The light beige powder additive remains stable, which facilitates blending with pigments and other (natural) agents.
Epoxies are popular components of bio-based composites, and so are biodegradable epoxy resin fillers. In epoxy composites, the resin is essentially a binder that holds together reinforcing fibres of different types. BioPowder.com resin powders can offer a double advantage in this context:
Excellent results can be achieved by using Olea FP as hydrophobic epoxy fillers for epoxy resin blends with rubber. Especially in high-load applications, those composites are a number one choice thanks to their adhesive properties.
Epoxy composites are used in a wide number of industrial products such as
When looking at specific material applications, epoxy fillers are mainly used in the following industries:
The BioPowder.com epoxy resin filler solution is completely safe and therefore highly suitable for composites used in interiors. They facilitate formulation of materials to be used for frequent human contact such as automotive parts, biopolymers for medical parts and indoor coatings. Our epoxy fillers are extremely versatile and open new possibilities for the creation of textured surfaces.
1. are there any minimum order quantities for your resin fillers / filler resin.
We supply exclusively to business customers, i.e. industrial manufacturers and specialized laboratories. Hence, our resin fillers are available as palleted batches with standard packaging units of 25kg bags. Although we are willing to supply individual 25kg bags, you will obtain a much better value-for-money when purchasing larger volumes.
Our assortment is made entirely of safe, biological by-products from the olive and fruit processing industry. Hence, BioPowder.com epoxy powders are exempt from regulatory frameworks for chemicals such as Regulation (EC) 1907/2006 (REACH).
Thanks to our global logistics network, we can ship all our epoxy resin fillers to your doorstep - both in Europe and worldwide. In some instances, we sell through specialized resellers and partner companies. Please ask us for guidance.
Yes, besides certain standardised resin powder grades, we offer tailored additive solutions. We are open to processing our natural raw materials into any possible particle size ranges. Our expertise allows us to create resin fillers for a variety of requirements and texture effects. Please contact us for further information.
All our natural raw material providers are located in close proximity to our production facility in Southern Spain. Hence, our epoxy filler range is made from local by-products by local people.
Numerous criteria have been considered throughout our procurement, production and logistics processes of our epoxy fillers. Resource use is kept down to a minimum and power is the main utility consumed in our factory. Due to local sourcing (point 5), we have minimized internal logistics, and we generally opt for the carbon-friendly sea freight option when exporting our resin fillers overseas.
As a leading specialist for natural powder additives, we strive to fulfill our orders in a timely and 100% reliable manner. Our long-standing market experience and stable procurement conditions allow us to produce large volumes on a continuous basis. Therefore, we can fulfill long-term supply contracts and are pleased to receive recurring orders.
Whatever your epoxy fillers / filler resin application might be, please contact us to discuss your project. We are pleased to help you find the optimal epoxy resin filler.
Sign up now for our WhatsApp newsletter and receive a FREE set of SVB playing cards!
Get the latest SVB news via WhatsApp!
Are you missing items that you have already placed in your shopping cart? Log in to see your saved items.
Best ratings
„used to fix dents on my Monsun 31 HR, is bit expensive, but realy time saver, easy to use, good for sanding. Just missed color. needed wite, not ivory. ivory is bit dak for our bout.“
„Nice quality material“
„Great product. Very fast drying and prepare to grinding.“
Fast, faster, SVB!
Worldwide delivery, in no time at all!
NEW: Worldwide UPS Express Shipping
Bookable directly in SVB Check-Out!
Fiberglass mat and roving, a fix for mishaps on board.
- Repair damage on board -
It's good to know that there are many options available when it comes to repairing and restoring the former splendor of your yacht . You'll find a selection of good and affordable products here, which will help you to fix anything on board. It's often a good idea to have a small supply of filler on board so that you can quickly seal up any holes or cracks.
Buy polyester resin and epoxy resin at low prices in our online shop and be read about these and how to use them in our Polyester Guide and Epoxy Guide .
Jorge da Costa M. on 17.06.2024
Great service
Mate S. on 17.06.2024
super wide catalog, international 1 week delivery in Europe, great service, ordered first time ever, very satisfied, thank you for your service.
Chris C. on 16.06.2024
Very easy and efficient service. Delivered within the time stated.
3M™ Marine High Strength Repair Filler restores damaged areas of fiberglass hulls, decks and other areas on boats. this filler is a high performance product that is reinforced with short strands of fiberglass for added strength. Boat restoration professionals commonly use this product.
A Strong Two-Part Filler for Marine Repair 3M™ Marine High Strength Repair Filler is a uniquely modified vinyl ester structural filler formulated with short strand fiberglass for non-fairing applications. The fiberglass fibers interlock to give our filler additional strength compared to regular fillers. Filler is non-staining, non-shrinking and it comes with 3M™ Marine Creme Hardener. We recommend this product for filling and covering scratches, dings, rust-outs, blemishes, pinholes and other simple surface defects that otherwise exhibit a true or fair line. Use this filler to level or even out depressions and low spots. Directions for Use
Learn more about minor marine blister repair with 3M products (PDF, 212 Kb) Learn more about marine gouge repair above the waterline with 3M products (PDF, 303 Kb) Learn more about small marine hole repair above the waterline with 3M products (PDF, 207 Kb) Learn more about 2-side frontside marine hole repair with 3M products (PDF, 209 Kb)
For industrial/occupational use only. not for consumer sale or use..
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
YACHTCARE HOTLINE (MO-FR): 0800 / 9 22 48 22 73
Händler suche
HIGH BUILD EPOXY FILLER ist eine 2-komponentige, nahezu lösemittelfreie Epoxidspachtelmasse und hinsichtlich der Applikationsmethode eine außerordentliche Weiterentwicklung der Ausgleichsmassen. Der Spachtel wird mit einer speziellen Nylonrolle (thermofusioniert) aufgerollt und erst dann mit einem Flächenspachtel oder Rakel nachgeglättet. Wo früher per Spritzapplikation mehrere Primerschichten aufgebracht und anschliessend nachgespachtelt wurde, wird heute arbeits- und zeitsparend per Rolle eine identisch hohe Schichtstärke aufgerollt. Bei unbequemen und beengten Platz- und Arbeitsbedingungen hat man durch die Rolle und einen Verlängerungsstiel einen zusätzlichen Vorteil. Durch alle diese Vorzüge hat der Spachtel ein großes Einsatzgebiet für viele Reparaturarbeiten im Über- und Unterwasserbereich von Yachten.
Materialdaten
Causes serious eye damage.
Causes serious eye irritation.
Causes severe skin burns and eye damage.
Causes skin irritation.
Harmful to aquatic life with long lasting effects.
May cause an allergic skin reaction.
Toxic to aquatic life with long lasting effects.
Bundle with gelcoat colour
Brand | Yachtcare |
Material | n.a. |
Compatible material | Metal |
Colour | lightgrey |
Item package quantity | 1 |
IMAGES
VIDEO
COMMENTS
Yachtcare Epoxy Fiber Filler is a universal, solvent free, 2-component fine filler based on epoxy and compounded with special fibres. The grey-coloured putty is waterproof and can be employed above or below the water on alle surfaces sealed with any kind of epoxy primer. This makes the filler appropriate for the maritime industry.
Epoxy fibre filler YACHTCARE . €39.90 * Prices incl. VAT plus shipping costs. Solvent free, two component fine filler based on epoxy and compounded with special fibres, that is waterproof and especially well suited for applications where high mechanical strains have to be absorbed. ... EPOXY FIBER FILLER/Faserspachtel 500g YACHTCARE Art.Nr ...
Er bildet eine feine und klebefreie Oberfläche aus. EPOXY FIBER FILLER kann dank der eingemischten Fasern in einer Schichtstärke von bis zu max. 3,0 cm aufgetragen werden, ohne zu schrumpfen. Der faserverstärkte Spachtel härtet mit einer feinen und klebefreien Oberfläche aus. Materialdaten. Inhalt: 500 g, 2,0 kg. Farbton: hellblau.
Description EPOXY FIBER FILLER is a very effective two-component epoxy putty, filled with fiberglass and fast drying. This multi-phase filler is characterized by its high water resistance and good sandability. Thanks to the glass fibers it contains, EPOXY FIBER FILLER can be applied at a thickness of up to 3 cm in one
Yachtcare Epoxy Fiber Filler is a universal, solvent free, 2-component fine filler based on epoxy and compounded with special fibres. The grey-coloured putty is waterproof and can be employed above or below the water on alle surfaces sealed with any kind of epoxy primer. This makes the filler appropriate for the maritime industry.
Bsn epoxy putty - Light blue - 1L - Bsn Yachts. € 56.43. In stock. Filler 403: microfibres - 160g - Versatile thickening additive for bonding applications. € 14.96. 1. YACHTNEEDS marketplace has a variety of fillers, including under waterline putty, above waterline filler, polyester paste fillers, epoxy fillers, and much more.
Yactcare's Epoxy Base Filler is a solvent-free, 2-part epoxy filler. With excellent water resistance for use above and below the waterline. Substrates. This filler is suitable for all conventional boat building materials, such as GRP, steel, aluminium, carbon fibre (CFRP) and rigid hardwood. Please note that GRP, steel and aluminium substrates ...
SEATEC Epoxy Fiber Putty (16) from €26.85. SEATEC ... Yachtcare - Glass fibre filler V-11 VT ... This means mix 100 g of the filler compound with 2-3 g of hardener. After drying, V-11 VT will remain slightly sticky and should be covered with another filler.
The epoxy repair kit Yachtcare 250g is ideal for repair of surfboards, surf and canoes. It contains the necessary hardware for quick and stratification is-Features: Application of epoxy materials, wood, polyester or metal Dose mixture: 4: 1 w / A: B = 4: 1 by weight Pot life: 30 minutes at 20 ° C. Advantages: Allows quick repair of damage or leaking parts in epoxy, wood, polyester and metal ...
Yachtcare Epoxy Base Filler B-Comp. Version 2.0 GB / EN Revision Date: 08.10.2021 Date of last issue: 12.11.2019 Date of first issue: 12.11.2019 7 / 23 Hygiene measures : When using do not eat, drink or smoke. Keep away from food, drink and animal feedingstuffs. Avoid contact with skin, eyes
High Build Epoxy Filler Yachtcare 5 kg is two component epoxy putty, easy to apply, instead of the traditional method of application of the sealant, High Build-Features: Exceptional water resistance to anti-osmotic protection and rust Suitable for all types of common materials in the nautical world (about 500 microns.) (laminate, carbon reinforced plastic, steel, aluminium, plywood and ...
High-quality care from Yachtcare Epoxy fibre filler is particularly suitable as a composite material for the filling of deep bumps and bonding of fibreglass, CFK, steel, aluminium and hardwood. Use in all applications that require mechanical resilience, high strength and excellent water resistance.
Yachtcare V-11 VT Fiber Putty : Material Type n.a. Seasons Year-round : Features Stark : Sport boating : Included Components 385 g A-component, 15 g B component, plastic spatula : ... Yachtcare Professional Fillers . V-11 VT fibre filler is a styrene-free, two-component thixotropic filler and adhesive made from highly reactive ...
Yachtcare Epoxy Fibre Filler Fibreglass Filler 2 kg - Fibre Reinforced Epoxy Filler : Amazon.de: DIY & Tools
Polyester reinforced with fiberglass filler, to be used on metal, wood or poylester fibelglass Call us: +377 93 30 22 23. Language: English GB ...
Shipbuilding: to protect the underlying material, the market has seen innovative yachtcare epoxy fiber filler solutions. To cater to this demand for high-tech epoxy fillers, we offer fully natural yachtcare high build epoxy filler systems as well as yachtcare epoxy additives with excellent resistance parameters. Our epoxy filler for boats is ...
WEST SYSTEM Epoxy Resin 105 and Fast Hardener 205 / 1.2 kg. only. €58 78. 66. WEST SYSTEM Fast Hardener 205 and Epoxy Resin 105 / 6 kg. only. €197 44. 9. WEST SYSTEM 206 Slow Hardener and 105 Epoxy Resin / 0.6 kg.
The fiberglass fibers interlock to give our filler additional strength compared to regular fillers. Filler is non-staining, non-shrinking and it comes with 3M™ Marine Creme Hardener. We recommend this product for filling and covering scratches, dings, rust-outs, blemishes, pinholes and other simple surface defects that otherwise exhibit a ...
Der Yachtcare Epoxy Fiber Filler ist ein leistungsfähiger, 2-komponentiger Epoxidspachtel mit eingemischten Spezialfasern. Er eignet sich hervorragend zur Verfüllung tiefer Unebenheiten und Verklebungen von CFK, GFK, Stahl, Aluminium sowie Hartholz. Der Epoxy Fiber Filler ist ideal für alle Anwendungen bei denen eine mechanische ...
A two-component vinylester filler formulated with unique, easy to sand Scotchlite Glass Bubbles. Designed for marine filling and fairing applications above and below the waterline. Good for repairs of fiberglass hulls, decks and other parts: filling scratches, cracks, and gouges, fairing and cosmetic filling of defects less than 1/4" deep.
Durch alle diese Vorzüge hat der Spachtel ein großes Einsatzgebiet für viele Reparaturarbeiten im Über- und Unterwasserbereich von Yachten. Materialdaten. Inhalt: 5,0 kg. Standardschichtstärke: bis 500µm TSD. Farbton: weiß (Basis) und cremeweiß (Härter) Ergiebigkeit: ca. 10m² / 5 kg bei ca. 500 µm TSD. Flammpunkt: > + 100 °C.
Yachtcare Epoxy Fiber Filler Glasfaserspachtel 500g - Faserverstärkte Epoxy Spachtelmasse ... High-quality care from Yachtcare. Epoxy base filler is universally used for all conceivable spatula work in the above and underwater area. Suitable for boat building materials such as GRP, CFRP, steel, aluminium and rigid hardwood. GRP, steel and ...
Yachtcare Epoxy Fiber Filler A-Komp. Version 1.0 DE / DE Überarbeitet am: 20.11.2019 Datum der letzten Ausgabe: - Datum der ersten Ausgabe: 20.11.2019 3 / 20 Reaktionsprodukt: Bisphenol-A-Epichlorhydrinharze mit durchschnittlichem Molekulargewicht ≤ 700 Formaldehyd, oligomere Reaktionsprodukte mit 1-Chlor-2,3-epoxypropan und Phenol